Open Source Scientific/Engineering Software - Page 30

Analysis software for MRS/NMR data. Allows processing and fitting to be performed in a fully automatic workflow.

dvbsnoop - DVB analyzer / MPEG analyzer program to monitor, analyze, debug, dump or view dvb/mpeg/dsm-cc/mhp stream information (TS, PES, SECTION) (e.g. digital television) send via satellite, cable or terrestrial.

openGPR is a framework for the management, processing and 2D/3D-visualization of ground penetrating radar (GPR, georadar) data. It interoperates with existing tools like Seismic Unix, with a special focus on georadar applications.

This lazarus project is a diagnostic tool for car. It use a dump interface to diagnose your car with the KWP2000 language ISO 9141 or 14230. It is fully configure by script file. You can read DTC, clear etc... KWP2000 component will use ELM327 too.

Plataforma de creación de información georeferenciada desde dispositivo móvil. Aplicación de escritorio 3D para explotación de la información. NEW: actualizada apk para soporte hasta Android 4.4 KitKat

I2CProg is I2C EEPROM Programmer. It works with HW PC to I2C bridge adapters.I2CProg supports stand-alone and in-circuit serial memory chip burning for all popular I2C EEPROM's. Hex editor capabilities.

MARIE is a robotic development and integration environment focused on software reusability and exploitation of already available APIs and middlewares used in robotics. Its main purpose is to create a rapid-prototyping approach to robotics developments.

A graphical interface for solving exterior ballistics problems, based on the excellent GNU exterior ballistics library. This software generates valid 3-DOF solutions to small arms trajectories, including wind and atmospheric corrections.

wxMathPlot is an add-on library for wxWidgets which provides a framework for easy plotting of mathematical functions, sampled data and generic 2D plots.

MATS is a computational tool to detect differential alternative splicing events from RNA-Seq data. The statistical model of MATS calculates the P-value and false discovery rate that the difference in the isoform ratio of a gene between two conditions exceeds a given user-defined threshold. From the RNA-Seq data, MATS can automatically detect and analyze alternative splicing events corresponding to all major types of alternative splicing patterns. MATS handles replicate RNA-Seq data from both paired and unpaired study design. More information can be found at http://rnaseq-mats.sourceforge.net.

A useful tool for viewing, recording and replaying URG sensor data. The sensor is made by Hokuyo CO.,LTD.

QwtPlot3D is a graphics extension to the Qt GUI application framework. It provides a 3D plotting widget for scientific data and mathematical expressions. It compares to the existing Qwt Project.

EqualX makes you easily write equations in LaTeX and preview them in real-time. repository: https://gitlab.com/q-quark/equalx

Eclipse Verilog editor is a plugin for the Eclipse IDE. It provides Verilog(IEEE-1364) and VHDL language specific code viewer, contents outline, code assist etc. It helps coding and debugging in hardware development based on Verilog or VHDL.

Library for ion optics, plasma extraction and space charge dominated ion beam transport.

Lush is a Lisp dialect with extensions for object-oriented and array-oriented programming. Lush is intended for prototyping numerically intensive applications and is designed for easy integration of existing C/C++/Fortran codes.

VOX-FE is voxel-based FE software, developed jointly between the University of Hull's Medical & Biological Engineering Research Group and Edinburgh Parallel Computing Centre, with a sophisticated graphical user interface that allows the complex loading regimes that are inevitably present in biomechanical analyses to be readily applied to the model geometry, and the resultant 3D stress and strain patterns to be visualized easily. In addition to the introduction above, several example videos are available on YouTube: https://www.youtube.com/watch?v=fjtjrM1Z1JQ https://www.youtube.com/watch?v=WVp1u1jlD3g https://www.youtube.com/watch?v=nT4xWlcm7aQ We also recorded a webinar with ARCHER, presenting VOX-FE 2.0: https://www.youtube.com/watch?v=q7GD7Nv5LYs

The DeconSeq tool can be used to automatically detect and efficiently remove sequence contamination from genomic and metagenomic datasets. It is easily configurable and provides a user-friendly interface. More at http://deconseq.sourceforge.net

EQAlign born as a software that assists to align a German Equatorial Mount (GEM) exactly to the Earth polar axis. Today, in adition to polar align feature, EQAlign is a full featured astronomical software.

Scientific calculator for PalmOS and PocketPC with graphing, financial operations, number conversions, complex numbers and much more.

The development community in building GIS solutions is sustaining an enormous level of effort. The GeoAPI project aims to reduce duplication and increase interoperability by providing neutral, interface-only APIs derived from OGC/ISO Standards.

With the nxcEditor for Linux NXT and BrickPi robots can be programmed (the source code is highlighted). A NXC-program can be executed either on the real robot or the nxcSimulator, which is integrated in the nxcEditor (the official compiler is invoked from the nxcEditor). A C-program for the BrickPi robot can be programmed either locally on the Raspberry Pi or over a network (using the compiler on the Raspberry Pi). The nxcEditor (as well as the nxcSimulator) is designed so that programming beginners can be taught.

Mantid Project (www.mantidproject.org)

NibblePro is a free CAM application for turret punch press machines. It imports DXF drawings, allows tool assignment from a configurable revolver, and exports NC programs ready for AMADA and LVD punch presses. v1.3: Improved AMADA repositioning safety and clamp-avoidance logic; expanded LVD Delta 2 / NCT04 support (arc nibbling, corner notches, hole grids). Trial version for LVD Delta 2. NOTE: WINDOWS SMARTSCREEN MAY WARN "WINDOWS PROTECTED YOUR PC" — UNSIGNED EXE, NOT MALWARE. CLICK "MORE INFO" THEN "RUN ANYWAY". Features: - DXF import with multi-part sheet layout - Configurable tool revolver (.arw format) - Punching, nibbling lines/arcs, hole grids, corner notches - NC program export (G-code) - Sheet repositioning (G25/G27) - NC simulation with step-by-step animation - Available in Polish, English, and German Want NibblePro to support your machine? Contact me: p.wojcik.cnc@gmail.com

An open source implementation of the High Level Architecture Run-Time Infrastructure. Focused on modularity and flexibility, Portico provides an extensible environment to support HLA simulation development and research.