Open Source BASIC Scientific/Engineering Software

GCBASIC is an open-source BASIC compiler for 8 bit Microchip PIC, Atmel AVR legacy, AVRDx and LGT microcontrollers. See https://ko-fi.com/post/The-Story-of-GCBASIC-Making-Microcontroller-Progr-D1D319SJ72 for story of GCBASIC. This is a continuous release project. The latest release is always available. This will give you the most complete development toolchain to create and program 8-bit PIC, AVR and LGT microcontrollers. We have added new capabilities that make GCBASIC the easiest tool set available - supporting over 1400 microcontrollers with tools to make this fun and simple. Please see the download section for your options. We have two IDEs, we have just the compiler and we have a minimal install - it is your choice. Please see the homepage here: https://gcbasic.com

Intelligent formulas: Numeric and symbolic calculations in LibreOffice Writer and Impress. The iMath extension to Libreoffice enables numeric and symbolic calculations inside a Writer document. If your OS can install .deb packages, have a look at my PPA http://launchpad.net/~jrheinlaender/+archive/ppa

Agena is an easy-to-learn procedural programming language designed for science, scripting, and many other applications. Binaries are available for Windows, Linux, Solaris, OS/2, Mac OS X, Raspberry Pi and DOS.

It requires db.sqlite database and images folder containing transistor's implementation pin Bipolar Transistor Database from Mox Software is not available anymore. As on many download websites it was mentioned as open sources (but no source available) I decided to rebuild if almost from scratch. As a transistor database may be useful i decide to share what I've done. It has been written in Purebasic because IDE is free till 800 lines of code written, and mainly because it's very portable with a lot of library embedded.

Spreadsheet Template for Structural Engineering (FEA Analysis for beams, trusses, 2D-frames). Templates for engineering calculations (fatigue, concrete plates, etc)

FreeBasic Math library

QChartist is a free and open source technical analysis charting software. Its purpose is to provide a complete set of tools to perform technical analysis on charts and data. It helps to make forecasts mainly for markets but can also be used for weather or any quantifiable data. The program is flexible and its functionalities can be easily extended. You can draw geometrical shapes on your charts or plot programmable indicators from your data. It is also possible to filter or merge data. I got a little inspired from MT4 allowing a fairly easy portability of programmed indicators from MT4 to QChartist. It is now faster and much more professional thanks to the use of a C++ layer (used mostly for calculations) over the standard Basic layer (used mostly for the GUI interface). You can use astro indicators and functions from a library for astronomical calculations. You can get real time quotations thanks to Yahoo Finance, Alpha Vantage, Tiingo, Stooq, Finnhub and Twelvedata data sources.

A simple DOS program pack that can very smoothly take some engineering calculations. It's fully written in russian, but I working over it's english version.

This Application assists the usage for CNC threading, especially the Mach3 software. The threading cycle uses the G76 command with some parameters. This program lets the user select from hundreds of predefined or free definable thread standards and calculates the parameters for the Mach3 command line. So, essentially just select your thread, calculate it, copy & paste the result to a GCode file, hit "Cycle start" and you get exactly what you want. Also included is a little tool to calculate the pitch diameter of a thread based on a measurement with three wires. Supports the threading standards M, G, R, BSW, BSF, UNC, UNF, UNEF and tapered Pipe R/Rc and Metrical threads. New: NPSM, NPT, NPTF, NPSC, NPSF. Includes an improved version of the Mach3 M1076.m1s threading macro and a matching screenset. Try also the Feed Calculator: www.sourceforge.net/p/feedcalculator

OOoLatex is no more maintained. Please consider using TexMaths (http://roland65.free.fr/texmaths/) OOoLatex is a set marcos designed to provide latex support into OpenOffice. Complex equations can be inserted as images, the latex code is saved into the image attribute while simpler equations are expanded into symbol characters to be inserted as text.

This application is intended to give abilities of calculating physical measures and draw charts, related to the aspect of the movement of sphere - shaped projectiles, ejected to reach some range. With the help of FreeBalistic you can fast calculate such measures as: height of bullet after specified time, height for given range, max height of bullet, range after given time, range to get max height, range to the end of move, time to get given range, time to get max height, time to get end of move. The app is currently in the middle state of development, and will recive at least one update. The curent target of this project is to achieve modification of chart display, that allows to show all scope of calculated values. In opposite to similar projects, this one is oriented to consider additional physical conditions, that can affect on the sphere-body movement, especially air resistance and throw angle For more info visit: www.freebasic.net/forum/viewtopic.php?f=8&t=27484

Sour*eforge.net has become inaccesible to me because of Cl*udflare. The latest versions of the programs will be on my site: https://matei.one/. Linear and nonlinear (from version 2.0.0) finite element analysis of 3-dimensional frames, trusses and other such structures, designed for use in civil engineering. SDL 1.2 or 2 can be used for graphics and an executable file for Window$ is included in version 2.1.0, as well as a program for analysing 2-dimensional structures, written in Sinclair BASIC for ZX Spectrum computers. A free emulator written in JavaScript, i.e. JSSpeccy v1, which was tested in FIrefox 10 from 2012 (and obviously works in all later versions), is also provided.

PNG images & DXF files to CNC G code files

Digitizer program to manually digitize data from graphic images. Allows for multiple calibrations and source image files for a single set of data series. Also includes an auto-export feature to streamline interoperability.

This project will use 3D Human Emulation using sensors to pickup human movements and displaying them on GUI for analysis.

ATM18 is a collection of software modules for the Elektor / CC2 project ATM18. The ATM18 project is a controller board based on a Atmel AVR ATmega88 controller. Sourcecode are available for Codevision AVR, AVR-GCC and BASCOM.

A simple application in italian to show iron steel properties. Un semplice programma in italiano per far vedere le proprietà degli acciai UNI/EN.

Aequalis is a converter of old measures. This application currently runs only on linux. At the time available measures include: weight, length and capacity. It is for the moment only in Italian.

Stop press - Alt4 has moved to http://www.swiftcomm.co.uk/alt4

Develop a weather station using the Arduino 2009. Monitor and log over a long period the following: Temperature- Humidity- Atmospheric pressure- Wind speed and direction- Rainfall- Lightning strokes- UV light intensity

Brandy is an interpreter for BBC Basic (or Basic V) that runs under a variety of operating systems. Basic V is the version of Basic supplied with desktop computers running RISC OS. These were originally made by Acorn Computers.

BNS - Burris Numerical System was written to store the last digit of a number in 3 dimensional space but store the rest of the number mathematically in the 4th dimension of space. The result is that no matter how long the number is you can write it down on a piece of paper and put it in your pocket. The software can be used to retrieve the number. This can be used to save computer files. The only limit with BNS is how much time the user has. The software nor the numerical system has no limits. The book on BNS is here https://www.createspace.com/4404221 The inventors websight is here: http://timetravelinstitute.biz

Putting truth before show-off. Criterial is an add-in for desktop versions of LibreOffice Calc (and forks) for statistical data analysis. The project is built on the refined expertise and core concepts of the AtteStat and StatAnt projects. Completely free. No donations required. Comes with absolutely no warranty. Rating: Everyone (All ages). MEDICAL DISCLAIMER: This software is not certified for use in healthcare and should not be used for diagnostic or treatment purposes. NOTICE FOR EU RESIDENTS: This software is NOT compliant with EU regulations, including GDPR and the AI Act. It is not intended for use within the EU. NOTICE FOR RF RESIDENTS: This software is NOT included in the URRP. Support may be limited in the RF region due to local regulatory constraints.