webadmin-list — Webmin users mailing list

Re: [webmin-l] Webmin does not keep my ldap users and groupssecondarygroups since upgrade 1.30

[Glenn A. <ga...@un...>]

This is when creating new users.

Thanks
-Glenn

-----Original Message-----
From: Jamie Cameron [mailto:jca...@we...]=20
Sent: Monday, September 25, 2006 9:24 PM
To: Webmin users list
Subject: Re: [webmin-l] Webmin does not keep my ldap users and
groupssecondarygroups since upgrade 1.30

On 25/Sep/2006 13:30 Glenn Arnold wrote ..
> Since I upgrade to webmin 1.30 from 1.29 my ldap and user secondary
> group selections are not highlighted for my default user template.  I
> went into module config and my default groups for the secondary groups
> were still there.  But, when I go to create a user my default
secondary
> groups are not highlighted.  Any ideas what might have happened?  One
> other issue on the create user form for ldap users and groups the
> secondary groups the label is a purplish blue and you can click on it
> and it gives you the following error:
> Failed to read help file
> /usr/libexec/webmin-1.300/ldap-useradmin/help/2nd.html
>=20
> Do I need to downgrade to 1.29 to see if this fixes my problem?

This may be a bug .. are you referring to default secondary groups
for new users, or secondary groups for existing users?

 - Jamie

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
-
Forwarded by the Webmin mailing list at
web...@li...
To remove yourself from this list, go to
http://lists.sourceforge.net/lists/listinfo/webadmin-list

Re: [webmin-l] Webmin does not keep my ldap users andgroups secondarygroups since upgrade 1.30

[Jamie C. <jca...@we...>]

On 25/Sep/2006 18:30 Murray Trainer wrote ..
> On Mon, 2006-09-25 at 18:24 -0700, Jamie Cameron wrote:
> > On 25/Sep/2006 13:30 Glenn Arnold wrote ..
> > > Since I upgrade to webmin 1.30 from 1.29 my ldap and user secondary
> > > group selections are not highlighted for my default user template.
> I
> > > went into module config and my default groups for the secondary groups
> > > were still there.  But, when I go to create a user my default secondary
> > > groups are not highlighted.  Any ideas what might have happened?  One
> > > other issue on the create user form for ldap users and groups the
> > > secondary groups the label is a purplish blue and you can click on
> it
> > > and it gives you the following error:
> > > Failed to read help file
> > > /usr/libexec/webmin-1.300/ldap-useradmin/help/2nd.html
> > > 
> > > Do I need to downgrade to 1.29 to see if this fixes my problem?
> > 
> > This may be a bug .. are you referring to default secondary groups
> > for new users, or secondary groups for existing users?
> > 
> >  - Jamie
> > 
> 
> It appears to be for new users.

OK, I see the cause of this - it is a bug in 1.300. It will be fixed in
the 1.310 release, and also in the 1.303 development version which will
be available from http://www.webmin.com/devel.html in a few hours.

 - Jamie

Re: [webmin-l] Webmin does not keep my ldap users and groups secondarygroups since upgrade 1.30

[Murray T. <mtr...@ce...>]

On Mon, 2006-09-25 at 18:24 -0700, Jamie Cameron wrote:
> On 25/Sep/2006 13:30 Glenn Arnold wrote ..
> > Since I upgrade to webmin 1.30 from 1.29 my ldap and user secondary
> > group selections are not highlighted for my default user template.  I
> > went into module config and my default groups for the secondary groups
> > were still there.  But, when I go to create a user my default secondary
> > groups are not highlighted.  Any ideas what might have happened?  One
> > other issue on the create user form for ldap users and groups the
> > secondary groups the label is a purplish blue and you can click on it
> > and it gives you the following error:
> > Failed to read help file
> > /usr/libexec/webmin-1.300/ldap-useradmin/help/2nd.html
> > 
> > Do I need to downgrade to 1.29 to see if this fixes my problem?
> 
> This may be a bug .. are you referring to default secondary groups
> for new users, or secondary groups for existing users?
> 
>  - Jamie
> 

It appears to be for new users.

Murray

Re: [webmin-l] Webmin does not keep my ldap users and groups secondarygroups since upgrade 1.30

[Jamie C. <jca...@we...>]

On 25/Sep/2006 13:30 Glenn Arnold wrote ..
> Since I upgrade to webmin 1.30 from 1.29 my ldap and user secondary
> group selections are not highlighted for my default user template.  I
> went into module config and my default groups for the secondary groups
> were still there.  But, when I go to create a user my default secondary
> groups are not highlighted.  Any ideas what might have happened?  One
> other issue on the create user form for ldap users and groups the
> secondary groups the label is a purplish blue and you can click on it
> and it gives you the following error:
> Failed to read help file
> /usr/libexec/webmin-1.300/ldap-useradmin/help/2nd.html
> 
> Do I need to downgrade to 1.29 to see if this fixes my problem?

This may be a bug .. are you referring to default secondary groups
for new users, or secondary groups for existing users?

 - Jamie

Re: [webmin-l] Webmin does not keep my ldap users and groups secondary groups since upgrade 1.30

[Murray T. <mtr...@ce...>]

On Mon, 2006-09-25 at 16:30 -0400, Glenn Arnold wrote:
> Since I upgrade to webmin 1.30 from 1.29 my ldap and user secondary
> group selections are not highlighted for my default user template.  I
> went into module config and my default groups for the secondary groups
> were still there.  But, when I go to create a user my default secondary
> groups are not highlighted.  Any ideas what might have happened?  One
> other issue on the create user form for ldap users and groups the
> secondary groups the label is a purplish blue and you can click on it
> and it gives you the following error:
> Failed to read help file
> /usr/libexec/webmin-1.300/ldap-useradmin/help/2nd.html
> 
> Do I need to downgrade to 1.29 to see if this fixes my problem?
> 
> Thanks
> -Glenn

Just noticed I have the same issue with the secondary groups not being
highlighted.  

Murray

[webmin-l] dansguardian

[boricua <bo...@de...>]

the webmin module is saying this
after upgrading DG, not sure what its telling me to get from dansguardian site, the module or DG itself ,since i already got DG

"
The version you have is not supported. Please get DansGuardian from http://www.dansguardian.org.

DG version: false"

[webmin-l] Webmin does not keep my ldap users and groups secondary groups since upgrade 1.30

[Glenn A. <ga...@un...>]

Since I upgrade to webmin 1.30 from 1.29 my ldap and user secondary
group selections are not highlighted for my default user template.  I
went into module config and my default groups for the secondary groups
were still there.  But, when I go to create a user my default secondary
groups are not highlighted.  Any ideas what might have happened?  One
other issue on the create user form for ldap users and groups the
secondary groups the label is a purplish blue and you can click on it
and it gives you the following error:
Failed to read help file
/usr/libexec/webmin-1.300/ldap-useradmin/help/2nd.html

Do I need to downgrade to 1.29 to see if this fixes my problem?

Thanks
-Glenn

Re: [webmin-l] ip not added to host file using template inbindupdate

[Jamie C. <jca...@we...>]

On 25/Sep/2006 12:12 Obantec Support wrote ..
> ----- Original Message ----- 
> From: "Jamie Cameron" <jca...@we...>
> To: "Webmin users list" <web...@li...>
> Sent: Monday, September 25, 2006 6:57 PM
> Subject: Re: [webmin-l] ip not added to host file using template in
> bindupdate
> 
> 
> > On 25/Sep/2006 08:11 Obantec Support wrote ..
> > > Hi Jamie
> > >
> > > i added
> > >
> > > @ IN A ${IP}
> > > www IN A ${IP}
> > >
> > > to the template file. but when i added a new master zone via bind form
> > > and
> > > put the required IP 1.2.3.4 in the form all the lines are correct as
> per
> > > the
> > > template but the file shows
> > >
> > > @ IN A ${IP}
> > > www IN A ${IP}
> > >
> > > not
> > >
> > > @ IN A 1.2.3.4
> > > www IN A 1.2.3.4
> > >
> > > i am using webmin 1.300
> >
> > That's because the BIND module doesn't yet support substituting $
> variables
> > in the template file. But it will in the next release ..
> >
> >  - Jamie
> >
> >
> >
> >
> Ok.
> 
> how about the fix for double change buttons on read mail as reported
> on 3/7/06 in message subject [webmin-l] Read Mail module 2 lines (forms)
> when you select a user
>  Read Mail module 2 lines (forms) when you select a user
> 
> screen capture http://www.mds.cc/webmin/doublechange.jpg

I must have missed that email .. I'll fix that in the next release too.

 - Jamie

Re: [webmin-l] ip not added to host file using template in bindupdate

[Obantec S. <su...@ob...>]

----- Original Message ----- 
From: "Jamie Cameron" <jca...@we...>
To: "Webmin users list" <web...@li...>
Sent: Monday, September 25, 2006 6:57 PM
Subject: Re: [webmin-l] ip not added to host file using template in
bindupdate


> On 25/Sep/2006 08:11 Obantec Support wrote ..
> > Hi Jamie
> >
> > i added
> >
> > @ IN A ${IP}
> > www IN A ${IP}
> >
> > to the template file. but when i added a new master zone via bind form
> > and
> > put the required IP 1.2.3.4 in the form all the lines are correct as per
> > the
> > template but the file shows
> >
> > @ IN A ${IP}
> > www IN A ${IP}
> >
> > not
> >
> > @ IN A 1.2.3.4
> > www IN A 1.2.3.4
> >
> > i am using webmin 1.300
>
> That's because the BIND module doesn't yet support substituting $
variables
> in the template file. But it will in the next release ..
>
>  - Jamie
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
your
> opinions on IT & business topics through brief surveys -- and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> -
> Forwarded by the Webmin mailing list at
web...@li...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-list
>
>
>
Ok.

how about the fix for double change buttons on read mail as reported
on 3/7/06 in message subject [webmin-l] Read Mail module 2 lines (forms)
when you select a user
 Read Mail module 2 lines (forms) when you select a user

screen capture http://www.mds.cc/webmin/doublechange.jpg

Mark

Re: [webmin-l] ip not added to host file using template in bind update

[Jamie C. <jca...@we...>]

On 25/Sep/2006 08:11 Obantec Support wrote ..
> Hi Jamie
> 
> i added
> 
> @ IN A ${IP}
> www IN A ${IP}
> 
> to the template file. but when i added a new master zone via bind form
> and
> put the required IP 1.2.3.4 in the form all the lines are correct as per
> the
> template but the file shows
> 
> @ IN A ${IP}
> www IN A ${IP}
> 
> not
> 
> @ IN A 1.2.3.4
> www IN A 1.2.3.4
> 
> i am using webmin 1.300

That's because the BIND module doesn't yet support substituting $ variables
in the template file. But it will in the next release ..

 - Jamie

Re: [webmin-l] missing (again?) apply configuration button

[<and...@fr...>]

Well, to be more correct....

Only the second text-box is required...
                                                                            
 Internal OS code used by Webmin 10.0                                       
                                                                            
                                                                            
                                                                            
                                                                            
                                                                            
 Andrea                                                                     
                                                                            





                                                                           
             andrea.lanza@fram                                             
             eweb.it                                                       
             Sent by:                                                   To 
             webadmin-list-bou         Webmin users list                   
             nc...@li...         <web...@li... 
             forge.net                 t>                                  
                                                                        cc 
                                       Webmin users list                   
             25/09/2006 19.08          <web...@li... 
                                       t>,                                 
                                       web...@li... 
             Please respond to         orge.net                            
             Webmin users list                                     Subject 
             <webadmin-list@li         Re: [webmin-l] missing (again?)     
             sts.sourceforge.n         apply configuration button          
                    et>                                                    
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           



OK, I tryed the workaround and it worked
It is necessary to change 10.1 in all the 2 text-boxes, not only the first
one as I firstly tryed

thank you,
Andrea




             "Jamie Cameron"
             <jcameron@webmin.
             com>                                                       To
             Sent by:                  Webmin users list
             webadmin-list-bou         <web...@li...
             nc...@li...         t>
             forge.net                                                  cc

                                                                   Subject
             25/09/2006 19.02          Re: [webmin-l] missing (again?)
                                       apply configuration button

             Please respond to
             Webmin users list
             <webadmin-list@li
             sts.sourceforge.n
                    et>





On 25/Sep/2006 09:32 and...@fr... wrote ..
> It seems to me that the apply configuration button (under Network
> Confguration) is missing again while using SUse Linux 10.1.
>
> No problem whith other Suse Version (9.2; 9.3; 10.0)
>
> The problem is present in 1.290 and in 1.300

Thanks, this is a bug in Webmin 1.290 and 1.300 .. I will fix it
in the next release. The work-around is to go to the Webmin
Configuration module, click on the Operating System icon and
change your OS to SuSE 10.0.

 - Jamie

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
-
Forwarded by the Webmin mailing list at web...@li...
To remove yourself from this list, go to
http://lists.sourceforge.net/lists/listinfo/webadmin-list



-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
-
Forwarded by the Webmin mailing list at web...@li...
To remove yourself from this list, go to
http://lists.sourceforge.net/lists/listinfo/webadmin-list

Re: [webmin-l] missing (again?) apply configuration button

[<and...@fr...>]

OK, I tryed the workaround and it worked
It is necessary to change 10.1 in all the 2 text-boxes, not only the first
one as I firstly tryed

thank you,
Andrea



                                                                           
             "Jamie Cameron"                                               
             <jcameron@webmin.                                             
             com>                                                       To 
             Sent by:                  Webmin users list                   
             webadmin-list-bou         <web...@li... 
             nc...@li...         t>                                  
             forge.net                                                  cc 
                                                                           
                                                                   Subject 
             25/09/2006 19.02          Re: [webmin-l] missing (again?)     
                                       apply configuration button          
                                                                           
             Please respond to                                             
             Webmin users list                                             
             <webadmin-list@li                                             
             sts.sourceforge.n                                             
                    et>                                                    
                                                                           
                                                                           



On 25/Sep/2006 09:32 and...@fr... wrote ..
> It seems to me that the apply configuration button (under Network
> Confguration) is missing again while using SUse Linux 10.1.
>
> No problem whith other Suse Version (9.2; 9.3; 10.0)
>
> The problem is present in 1.290 and in 1.300

Thanks, this is a bug in Webmin 1.290 and 1.300 .. I will fix it
in the next release. The work-around is to go to the Webmin
Configuration module, click on the Operating System icon and
change your OS to SuSE 10.0.

 - Jamie

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
-
Forwarded by the Webmin mailing list at web...@li...
To remove yourself from this list, go to
http://lists.sourceforge.net/lists/listinfo/webadmin-list

Re: [webmin-l] missing (again?) apply configuration button

[Jamie C. <jca...@we...>]

On 25/Sep/2006 09:32 and...@fr... wrote ..
> It seems to me that the apply configuration button (under Network
> Confguration) is missing again while using SUse Linux 10.1.
> 
> No problem whith other Suse Version (9.2; 9.3; 10.0)
> 
> The problem is present in 1.290 and in 1.300

Thanks, this is a bug in Webmin 1.290 and 1.300 .. I will fix it 
in the next release. The work-around is to go to the Webmin
Configuration module, click on the Operating System icon and
change your OS to SuSE 10.0.

 - Jamie

[webmin-l] missing (again?) apply configuration button

[<and...@fr...>]

It seems to me that the apply configuration button (under Network
Confguration) is missing again while using SUse Linux 10.1.

No problem whith other Suse Version (9.2; 9.3; 10.0)

The problem is present in 1.290 and in 1.300

thanks in advance,

Andrea

Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla.

Visitate il sito http://www.frameweb.it

[webmin-l] ip not added to host file using template in bind update

[Obantec S. <su...@ob...>]

Hi Jamie

i added

@ IN A ${IP}
www IN A ${IP}

to the template file. but when i added a new master zone via bind form and
put the required IP 1.2.3.4 in the form all the lines are correct as per the
template but the file shows

@ IN A ${IP}
www IN A ${IP}

not

@ IN A 1.2.3.4
www IN A 1.2.3.4

i am using webmin 1.300

Mark

Re: [webmin-l] bandwidth monitoring on debian

[Jamie C. <jca...@we...>]

On 24/Sep/2006 12:40 Pat Erler wrote ..
> hi,
> 
> On Sun, 24 Sep 2006 20:08:01 +0200, Jamie Cameron <jca...@we...>
> wrote:
> >> on debian 3.1, if i enable the bandwith monitoring, my /var partition
> is
> >> running full very quickly. one thing i realized is, that the firewall
> >> logging is not just going into /var/log/bandwidth but alos into
> >> /var/log/debug AND /var/log/kern.log. i wonder if there's a way to 
> >> disable
> >> this behaviour.
> >
> > Yes, you can do this in the System Logs module. Just click on the entries
> > for /var/log/debug and kern.log, and in the 'Message types to log'  
> > section
> > add a now with the Facilities set to local7 and the Priorities to None.
>
> "add a now"? this one i don't really get..

Sorry, I meant 'add another row' :)
 
> >
> >> another problem is, that on one of my servers, although iptables is
> >> installed, the module is reporting that none of the supported firewall
> >> systems is found. what can i do about this?
> >
> > Have you tried using the Linux Firewall module on that server to do the
> > initial firewall setup? Unless this is done, the Bandwidth module can't
> > add the iptables rules it needs.
> ok, this may be the problem. it's a production server, so i can't do this
> right now, thanks anyway..

You can enable the firewall module without actually blocking any traffic
though .. it just sets up rules to let everything through.

 - Jamie

Re: [webmin-l] Setting Postfix for Procmail

[Gerard S. <ge...@se...>]

The Nice Spider <the...@ya...>

> The Web,in tutorial only how how to setup Sendmail to
> use=20
> Procmaol. Anyone can help me how to setup Postfix to
> use=20
> Procmail?=20

You need to either add or uncomment the following line in Postfix:

mailbox_command =3D /usr/local/bin/procmail

This applies to Postfix 2.3 or better. I am not sure about older
versions. Check your path to 'procmail' and change it if it is incorrect.
The postfix main.cf file is usually in either the /etc/postfix or
/usr/local/etc/postfix directory.

Make sure that the 'home_mailbox' and 'mail_spool_directory' entries are
commented out. By default they usually are.

Just out of curiosity, do you really need procmail? I have found it to
be getting rather unfashionable. Then again, that is my own opinion.


--=20
Gerard

Money may not buy happiness; however, it does by beer!

     Bud~Man

Re: [webmin-l] bandwidth monitoring on debian

[Pat E. <mai...@pa...>]

hi,

On Sun, 24 Sep 2006 20:08:01 +0200, Jamie Cameron <jca...@we...>  
wrote:
>> on debian 3.1, if i enable the bandwith monitoring, my /var partition is
>> running full very quickly. one thing i realized is, that the firewall
>> logging is not just going into /var/log/bandwidth but alos into
>> /var/log/debug AND /var/log/kern.log. i wonder if there's a way to  
>> disable
>> this behaviour.
>
> Yes, you can do this in the System Logs module. Just click on the entries
> for /var/log/debug and kern.log, and in the 'Message types to log'  
> section
> add a now with the Facilities set to local7 and the Priorities to None.
"add a now"? this one i don't really get..

>
>> another problem is, that on one of my servers, although iptables is
>> installed, the module is reporting that none of the supported firewall
>> systems is found. what can i do about this?
>
> Have you tried using the Linux Firewall module on that server to do the
> initial firewall setup? Unless this is done, the Bandwidth module can't
> add the iptables rules it needs.
ok, this may be the problem. it's a production server, so i can't do this  
right now, thanks anyway..

PAT

Re: [webmin-l] bandwidth monitoring on debian

[Jamie C. <jca...@we...>]

On 24/Sep/2006 04:18 Pat Erler wrote ..
> hello,
> 
> on debian 3.1, if i enable the bandwith monitoring, my /var partition is
> running full very quickly. one thing i realized is, that the firewall 
> logging is not just going into /var/log/bandwidth but alos into  
> /var/log/debug AND /var/log/kern.log. i wonder if there's a way to disable
> this behaviour.

Yes, you can do this in the System Logs module. Just click on the entries
for /var/log/debug and kern.log, and in the 'Message types to log' section
add a now with the Facilities set to local7 and the Priorities to None.
 
> another problem is, that on one of my servers, although iptables is  
> installed, the module is reporting that none of the supported firewall
> systems is found. what can i do about this?

Have you tried using the Linux Firewall module on that server to do the
initial firewall setup? Unless this is done, the Bandwidth module can't
add the iptables rules it needs.

 - Jamie

Re: [webmin-l] Modified Modules

[Jamie C. <jca...@we...>]

On 24/Sep/2006 08:58 Grant Peel wrote ..
> Hi all,
> 
> I amsure this has been convered before,  but I can locate a definitive
> answer.
> 
> I have made some modifications to the usermin change password modules,
> and I 
> want to rename it so that when I upgrade I don't loose the changes.
> 
> I understand the I would need to change the name of the directory in 
> /usr/local/usermin-n.nnn/change-password to someting else like 
> /usr/local/usermin-n.nnn/change-passsword-2 and the 
> /etc/usermin/change-password to /etc/usermin/change-password-2 .
> 
> Where else to names, lables etc need to be changed to make this a truely
> unique module.

That is all .. however, you may need to grant yourself access to this
new copy of the module in the Webmin Users module.

 - Jamie

[webmin-l] Modified Modules

[Grant P. <gp...@th...>]

Hi all,

I amsure this has been convered before,  but I can locate a definitive 
answer.

I have made some modifications to the usermin change password modules, and I 
want to rename it so that when I upgrade I don't loose the changes.

I understand the I would need to change the name of the directory in 
/usr/local/usermin-n.nnn/change-password to someting else like 
/usr/local/usermin-n.nnn/change-passsword-2 and the 
/etc/usermin/change-password to /etc/usermin/change-password-2 .

Where else to names, lables etc need to be changed to make this a truely 
unique module.

-Grant

[webmin-l] bandwidth monitoring on debian

[Pat E. <mai...@pa...>]

hello,

on debian 3.1, if i enable the bandwith monitoring, my /var partition is  
running full very quickly. one thing i realized is, that the firewall  
logging is not just going into /var/log/bandwidth but alos into  
/var/log/debug AND /var/log/kern.log. i wonder if there's a way to disable  
this behaviour.

another problem is, that on one of my servers, although iptables is  
installed, the module is reporting that none of the supported firewall  
systems is found. what can i do about this?

PAT

Re: [webmin-l] small wish for the ftp file system backup

[Jamie C. <jca...@we...>]

This is already possible in Webmin 1.300 - when creating an HTTP Service
monitor, you can specific a regular expression that the resulting page
must match.

 - Jamie

On 22/Sep/2006 11:32 Pat Erler wrote ..
> ok, that's possible, right..
> 
> without opening a new thread: what i'm in need of for the "system and 
> server status" module, is a test if a remote webpage has changed - could
> you think about implementing this? what somehow should be possible is,
> to  
> ignore smaller changes, like a current date display on the website..
> 
> thanks,
> 
> PAT
> 
> On Fri, 22 Sep 2006 18:44:42 +0200, Jamie Cameron <jca...@we...>
> wrote:
> 
> > On 21/Sep/2006 23:56 Pat Erler wrote ..
> >> hi jamie,
> >>
> >> in the scheduled backup, everytime a backup is repeated the existing
> >> backup file is overwritten. this way, there is a (small) time when no
> >> backup of the system exists. so, is it possible to write the backup
> >> remotely(!) to a tempfile and to overwrite the existing backup file
> >> after
> >> the verification of the new backup file?
> >
> > Why not just use the post-backup command feature to rename the backup
> > file (using SSH or something) when it is complete? Having Webmin do it
> > is tricky, as renames like this would fail if you are writing to a remote
> > tape device.
> >
> >  - Jamie
> >
> > -------------------------------------------------------------------------
> > Take Surveys. Earn Cash. Influence the Future of IT
> > Join SourceForge.net's Techsay panel and you'll get the chance to share
> > your
> > opinions on IT & business topics through brief surveys -- and earn cash
> > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > -
> > Forwarded by the Webmin mailing list at  
> > web...@li...
> > To remove yourself from this list, go to
> > http://lists.sourceforge.net/lists/listinfo/webadmin-list
> 
> 
> 
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys -- and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> -
> Forwarded by the Webmin mailing list at web...@li...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-list

Re: [webmin-l] small wish for the ftp file system backup

[Pat E. <mai...@pa...>]

ok, that's possible, right..

without opening a new thread: what i'm in need of for the "system and  =

server status" module, is a test if a remote webpage has changed - could=
  =

you think about implementing this? what somehow should be possible is, t=
o  =

ignore smaller changes, like a current date display on the website..

thanks,

PAT

On Fri, 22 Sep 2006 18:44:42 +0200, Jamie Cameron <jca...@we...> =
 =

wrote:

> On 21/Sep/2006 23:56 Pat Erler wrote ..
>> hi jamie,
>>
>> in the scheduled backup, everytime a backup is repeated the existing
>> backup file is overwritten. this way, there is a (small) time when no=

>> backup of the system exists. so, is it possible to write the backup
>> remotely(!) to a tempfile and to overwrite the existing backup file  =

>> after
>> the verification of the new backup file?
>
> Why not just use the post-backup command feature to rename the backup
> file (using SSH or something) when it is complete? Having Webmin do it=

> is tricky, as renames like this would fail if you are writing to a rem=
ote
> tape device.
>
>  - Jamie
>
> ----------------------------------------------------------------------=
---
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to shar=
e  =

> your
> opinions on IT & business topics through brief surveys -- and earn cas=
h
> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEVDEV
> -
> Forwarded by the Webmin mailing list at  =

> web...@li...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-list

Re: [webmin-l] subversion question

[Jamie C. <jca...@we...>]

On 22/Sep/2006 04:12 Russ Ferriday wrote ..
<blockquote type=3D"cite">
Hi all,<br /><div><span class=3D"Apple-style-span">I'm having a bit of a problem with <font color=3D"#000000" class=3D"Apple-style-span"><span style=3D"background-color: transparent;" class=3D"Apple-style-span">subversion configuration, and would appreciate any advice.</span></font></span></div><div><br class=3D"khtml-block-placeholder" /></div><div><font color=3D"#000000" class=3D"Apple-style-span"><span style=3D"background-color: transparent;" class=3D"Apple-style-span">Webmin Version 1.300 on CentOS</span></font></div><div>Linux version 2.6.9-34.0.2.EL (buildcentos@v20z-i386) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Fri Jul 7 </div><div>19:24:57 CDT 2006</div><div><font color=3D"#000000" class=3D"Apple-style-span"><span style=3D"background-color: transparent;" class=3D"Apple-style-span">Virtualmin SubVersion Repositories (v. 2.7)</span></font></div><div><br class=3D"khtml-block-placeholder" /></div><div>In two virtual hosts I have:</div><div><font color=3D"#000000
 " class=3D"Apple-style-span"><span style=3D"background-color: transparent;" class=3D"Apple-style-span">Allow SubVersion repositories &lt;checked&gt;</span></font></div><div><br class=3D"khtml-block-placeholder" /></div><div>Now I'm expecting under Webmin/Servers to see a Subversion Repositories item. </div><div><br class=3D"khtml-block-placeholder" /></div><div>Is this correct, and why might I not see this?</div><div><br class=3D"khtml-block-placeholder" /></div><div>--r</div><div><font color=3D"#000000" class=3D"Apple-style-span"><span style=3D"background-color: transparent;" class=3D"Apple-style-span"><br class=3D"khtml-block-placeholder" /></span></font></div><div><br class=3D"khtml-block-placeholder" /></div></blockquote>Yes, an icon for 'Virtualmin SubVersion Repositories' should appear under the Servers category.. at least when you are logged in as the owner of a domain that it is enabled for.<br /><br />=A0- Jamie<br /><br />