Search Results for "microcontroller" - Page 3
Sort By:
Showing 329 open source projects for "microcontroller"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
1
IoT Leaf
Software resources for the ESP32 based IoT Leaf microcontroller board
...The board can be powered via solar cell or USB and provides a battery charging function and deep-discharge protection for LiPo batteries. Beside the ESP32 the microcontroller part is prepared for a LoRaWAN and a GPS module. Both together provide a powerful hardware which can be used in many different scenarios. Details and the full specification are available at https://iot.halaser.de This repository contains different firmware-examples and applications which can be used together with this board as well as hardware designs which are free to be used. -
2
L-ink_Card
Smart NFC & ink-Display Card
...The repository includes board design files, firmware, and supporting software for customizing what the card shows. For hardware hackers and smart-card enthusiasts, it’s a fascinating hybrid of microcontroller, low-power display, and NFC tech in a familiar credit-card size. -
3
PICKitPlus - the database
PICKitplus database only. For Microchip PICs and EEPROMs
...This repository provides the database that contains the new programming protocol to support for Microchip PIC microcontrollers We publish the updated and managed Microchips PIC microcontroller and EEPROM database here. You can use with the original Microchip software but the original Microchip software will not program many of the newer classes of chips. These new classes of chips will be listed in the menus, but, they will be detectable. -
4
piconomix-fwlib
C firmware and documentation for 8/16/32-bit microcontrollers
The foundation of piconomix-fwlib is knowledge and freedom: the knowledge and freedom to use the right microcontroller for the job and not trying to fit a square peg in a round hole. piconomix-fwlib is a collection of C firmware and documentation for microcontrollers to develop code that is vendor and architecture independent (or easier to reuse). It is tough to find the best compromise between lean 8-bit targets, middle-of-the-road 16-bit targets, and resource rich 32-bit targets, but this cross-platform library aims to provide a good start before you are forced to add target specific code and getting locked in. ... -
Try Google Cloud Risk-Free With $300 in CreditUse your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
-
5
Proxminimal
Proximity sensor using commodity IR receiver
By leveraging a microcontroller RS232 port as both a modulation source and detector, it is possible to make a simple proximity or through beam type sensor for very little cost. A special bit pattern is used to eliminate any DC component in the RS232 signal making it compatible with the IR receiver. -
6
MCU live explorer
A project for simple and deep microcontroller unit management.
This project is in beta phase and actually configured for ARM Cortex® M3 MCU, tested with stm32f103c8t6 "blue pill" Reference for configuration: RM0008 Reference manual STM32F101xx, STM32F102xx, STM32F103xx, STM32F105xx and STM32F107xx advanced Arm®-based 32-bit MCUs document available on STMicroelectronic official site Need be installed as prerequistite PYSWD, a python module for debugging microcontrollers with SWD using ST-Link/V2 (/V2-1) debugger available at... -
7
HiTerminalLogger
Color Hilighted Serial COM Console Reader & html report for Windows
...It is a windows Console Application can be run on bash terminal emulators like "git bash for windows"/CMDer/Conemu/Ubuntu for windows etc. This tool can be used for any microcontroller projects like Arduino/stm32 to automatically log & save the serial data for a long period. This tool can be a console alternative to the tools like HTerm and TerraTerm, it runs internally with the perl subsystem, which you don't need to care. In case the patthern file (with -p option) isn't given as the input, then the logs are printed with the default color (white) with the Timestamps for every new line of the Text. ... -
8
ServoTimer
Connect your Slot-Racer to your Android Device
...At the moment ServoTimer features include: - Lap timer, best, average, last lap - Speech output of lapTimes - Turbo Function All you need to get things working is a IOIO microcontroller coming at about 35$ (https://github.com/ytai/ioio/wiki). -
9
Lake Robotics Embedded Software Platform
Platform/Framework for embedded software
The Lake Robotics Embedded Software Platform is a toolkit/framework for developing embedded software for different microcontroller (at the moment only ARM and Cortex-M3 are supported). The platform provides libraries including other open source projects for Realtime OS (ChibiOS, FreeRTOS), tcp/ip networking, C-Runtime and C-Standard-Libs. The toolkit also provides wrapper or abstraction libraries for easier handling of device driver and OS-related stuff. -
Full-stack observability with actually useful AI | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
10
avr-gfortran
program avr microcontroller using fortran77 syntax
This is a pseudo Fortran77 compiler for Atmel AVR microcontroller, written in Fortran using gfortran compiler. The compiler use avr-gcc-4.9.2 as dependency. The recent version of compiler is 1.0.1-alpha. For Windows version (32bit), click https://sourceforge.net/projects/avr-gfortran/files/avr-gfortran-1.0.1-alpha/avr_gfortran-1.0.1-x86win.zip/download Linux version (32bit), click https://sourceforge.net/projects/avr-gfortran/files/avr-gfortran-1.0.1-alpha/avr_gfortran-1.0.1-32bit_linux.tar.xz/download User guide, click https://sourceforge.net/projects/avr-gfortran/files/avr-gfortran-guide.pdf/download -
11
EMPCCCC
PC XBee wireless control of an Arduino
Operate Arduino microcontrollers wirelessly from a PC using XBees or locally using IR controllers. EMPCCCC : Embedded Micro PC Command Control Communication. Arduino microcontroller projects : building instructions, Arduino operation and Delphi PC Command Control Communication Code. EMPCCCC Version 3.1.13.2013 and after is working. Arduino code is included in the zip file. Arduino code for other projects is available as a separate zip and is updated separately and more often. All code Latest 2019 January 13 Arduino only 2018 -
12
EtherCard
EtherCard is an IPv4 driver for the ENC28J60 chip
...Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. An interrupt pin is not required. Any Arduino IDE >= 1.0.0 should be fine. EtherCard is available for installation in the Arduino Library Manager. Alternatively, it can be downloaded directly from GitHub. -
13
.... __________________________________________________________ Making the ESP-01 ESP8266 Relay Module so it will work with normal Arduino sketches, using either GPIO0 or 2 to trip relay. I use nothing more than an optocoupler to replace a STCF104W microcontroller, which is not only manufactured wrong, but the screenprinting on the PCB is wrong. This caused me to smoke a transistor, which I replace caveman-style. The useless STC microcontroller is ripped out, and the output of GPIO0 is used (+3.3v logic) to provide the +5v logic the STC was SUPPOSED to provide via AT pins-if it were even correctly manufactured in China.
-
14
ESP8266_Flespi_yum
ESP8266 (ESP-01) + Serial Commands + Flespi Broker
ESP-01, the simplest USD 1.50.- ESP8266 gets a firmware that allows the user to control it by serial port. Therefore it can be used along with any terminal, computer or microcontroller, which is equipped with a serial port (or USB port) -) Connect / disconnect to WiFi and Flespi MQTT broker -) Publish messages -) Subscribe to topics / Unsubscribe from topics -) Read the messages received Furthermore a GUI is on developing process to demonstrate the use. Paypal donations are welcome! reinharddaemon@gmail.com -
15
Simple Dumping Monitor for Arduino
Simple in use library to display dumps and debug Arduino sketches.
Simple Dumping Monitor Library (DumpMon) for Arduino-compatible ATmega microcontroller based boards allow to display either memory, registers and timer dumps and also interrupt vectors table dump. Beginning since version 0.6 functions of simple symbolic debugger are added. Being compiled the library requires about 11 KBytes of program memory (15 KBytes for Arduino MEGA). Requirements to RAM memory don't exceed 1 KByte (277 Bytes for dumpmon.pde example, 377 Bytes for dumpmonDebug.pde). -
16
Did the pets eat?
AM/PM Digital Reminder (Pets, Pills, etc.)
If two or more people are responsible for something, either both do it, or none. Less often it only gets done once. This is an AVR ATTiny84 project that has features like putting the microcontroller to sleep to save battery. One button is to change from AM or PM, and the other is to turn on one of the LEDs representing the current choice for 5 seconds. The unit then goes to sleep, and the LEDs are off. It is powered by an 18650 and I put it all in a medicine bottle. A description of it's construction, as simple as it is, is at an instructable here: https://www.instructables.com/id/Did-We-Feed-the-Pets/ Current draw: Awake: 5 mA Sleeping: 0.13 uA (!) -
17
AVRpal.NET
A Windows based GUI for popular avrdude command line utility
A Windows based GUI for popular avrdude command line utility for AVR microcontroller Programming.It has got many features with a lightweight easy to understand interface. AVRdude is provided with it. It previously used LibUSBdotnet but now it uses LibUSBK for compatibility(http://libusbk.sourceforge.net/UsbK3/index.html) .Supports only USBasp programmer but if you can code,you can change it to work with your programmer.Feedback is necessary friends -
18
Arduino Si4735 radio library
Arduino and Silicon Laboratories Si4735 radio library
This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features. -
19
Pinguino IDE
Pinguino packages
...It supports different 8- and 32-bit ©Microchip microcontrollers, all with built-in USB module. Pinguino comes with a USB Bootloader, a small program running inside the microcontroller which is responsible for transferring your application from your PC to the microcontroller memory and handing over the control to this program afterwards. No programmer is then needed, only a USB cable and a PC. Pinguino is also an Integrated Development Environement (IDE) which gives everyone the ability to write, compile and upload programs on a Pinguino board. -
20
rossolib
library and examples for Il Pinguino Rosso board
A library and examples for my Il Pinguino Rosso board equipped with PIC18F46K22 microcontroller. See the board at http://betterc18.blogspot.ro/p/blog-page.html -
21
iwattnick
iWattnick: the ultimate e-bike computer
...It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to controller throttle input. The project includes: The hardware (schematics & drawings) The firmware (microcontroller program) The software (for mobile phones and PC) Project developement is being tracked (in Russian) here: http://electrotransport.ru/ussr/index.php?topic=24226.0 -
22
Wi-PWN
ESP8266 firmware for performing deauthentication attacks
ESP8266 firmware for performing deauthentication attacks, with ease. Wi-PWN is a firmware that performs death attacks on cheap Arduino boards. The ESP8266 is a cheap microcontroller with built-in Wi-Fi. It contains a powerful 160 MHz processor and it can be programmed using Arduino. A deauthentication attack is often confused with Wi-Fi jamming, as they both block users from accessing Wi-Fi networks. The 802.11 Wi-Fi protocol contains a so-called deauthentication frame. It is used to disconnect clients safely from a wireless network. ... -
23
metacell
E-mobility Battery Standard
MetaCell is a battery standard for E-mobilty applications. It starts with a case for 18650 Li-Ion batteries to be used on pedelecs, E-skates or scooters, adds a microcontroller for capacity and lifecyle-management, and continues to an open database for battery Quality management (QM). -
24
Tiny8051 is small 8051 microcontroller simulator written in C#. Project was created for educational purposes, to show how µP works by using clean visual interface and debugging. Note: communication over serial port was not implemented, because there was no demand for it.
-
25
C4uC
Code generator, from grail (.fm) files, to microcontroller code
Currently version: converting Grail (.fm) to Arduino code.
