Search Results for "microcontroller"

amforth is an extendable command interpreter running on AVR ATmega and TI MSP430 microcontrollers. The Risc-V and ARM architectures are ascending. Turnkey actions for IoT workloads are possible as well. The command language is close to the Forth 2012 standard.

AVR128DA /Atmega128 microcontroller based open source EID smartcard with RSA (512-2048) and ECC (prime192v1, prime256v1, secp384r1, secp521r1 and secp256k1) support. Compatible with MyEID card from Aventra. Supported in windows and linux by opensc package. Allow about 64KiB space for keys/certificates. PKCS#15 structure supported. USB token with CCID interface based on xmega128a4u with same features as card.

...The bandwidth is lower than a commercial scope, so it's use is limited to signals of 500 kHz and below. It's sample buffer is also smaller than a commercial scope, however sufficient for most oscilloscope functions. This is a version based on the PIC16F877A microcontroller running with a 20MHz clock. The maximum sampling rate is 1 MHz with a 5 Mhz equivalent sampling mode. Currently, the computer interface supports USB, serial, and parallel ports. Good luck on the construction and I hope you enjoy your oscilloscope. I am happy to answer any questions or provide technical support for this design.

This project has been moved to http://pros.cs.purdue.edu/ PROS is a lightweight and fast alternative operating system for the VEX Cortex Microcontroller. It features multitasking, low-level control, and Wiring compatible functions to harness the full power of the Cortex. With a real-time kernel based on FreeRTOS and a development environment built on Eclipse CDT, PROS uses proven software to increase the reliability and usability of the VEX development system across all three major computing platforms. ...

EM-65C02 emulates a Western Design Centre (WDC) 65C02 microprocessor on a Microchip PIC24/33 microcontroller. The code supports varying amounts of RAM and ROM depending on the features of the host device. The emulation speed depends on the device and its oscillator configuration. A PIC24EP running at 70MIPS has emulates a 65C02 running at about 6Mhz. The example code configuration uses a copy of the BBC BASIC ROM image and a simulation of enough of the Acorn MOS to make the BASIC work using a serial UART connection.

This project provides the PIC16F84 source code required to program an old-fashioned pong game running on very basic hardware (schematic supplied) connected to a TV.

This is a RGB LED Pin-back Button controlled by an AVR Microcontroller.

An implementation of LWIP under FreeRTOS for the LPC1768/9 Cortext M3 microcontroller

Stingray 3 is a high performance engine Sequential Electronic Fuel Injection and Electronic Ignition controller designed specifically for light experimental aircraft and off-road applications.

Written entirely in 8051 assembly this is a bare bones Real Time OS (RTOS) kernel for the P89C668 microcontroller. The OS itself is inspired by the discussion in 'MicroC/OS-II: The Real-Time Kernel' an excellent book by Jean J. Labrosse.

Sharing software code around the Didel and Z-Control Microcontroller board PICSTAR and STARLET. The project will include functional test routines, drivers and applciations in diverse programming languages such as CALM, SDCC and others.

Microcontroller (AVR) based standalone digital light controllers ("dimmers"). The "Diamond" series supports 20 channels (TRIAC, FET, 0-10V, relay) with automatic fading, 20 scenes, 21 timers, IR remote, LCD, DMX-512 interface, global standby & more.

FishBrains - an open-source ARM-7 microcontroller and development system, including libraries.

Various microcontroller projects and embedded firmware. Assembly language and C source code. Schematics for hardware and board layouts. Embedded tools. Microchip PIC. Biotech automated instrumentation. Perl scripts. By Jonathan Cline at 88proof.com

K-OS is an open-source realtime-operating-system based on the OSEK/VDX standard aimed at compiler and microcontroller independence. Currently we support Motorola (Freescale) HC12/HCS12/HCS12X targets.

IR transmitter, written in ASM for the PIC 16F628A microcontroller. IR transmitter is based on the Sony SIRC protocol, 12 bits version.

kbdbabel - collection of open source microcontroller based keyboard protocol translators

Firmware for the FiFi-LCD RDS display, using an LPC936 microcontroller.

ATmon is a bootloader and monitor tool for the Atmel ATmega32 microcontroller.

A laser tag system similar to MILES, for both indoor and outdoor applications. Modular and built on a microcontroller-independent interface.

MuCTools is a group of command line utilities connect with Philips'P89C668 (8051 type) and other Philips microcontroller bootloaders, completing the 8051 development chain with free software for linux. muctools0.9 works with limited features. See README

Focus of this project is the development of an microcontroller/FPGA evaluation board. Basic characteristics as given below: - Philips LPC 22xx controller - additional FPGA, Xilinx Spartan - SD-Card interface for booting - additional IO-interfaces

AVR microcontroller burning utility

C compiler for 8-bit microcontrollers, currently targeting the PIC 16F series

TaltOS is a component-based real-time embedded operating system aiming at run-time reconfiguration and dynamic loading/unloading of components. The primary prototype targets the Philips LPC2106 ARM7-based microcontroller.