Search Results for "pc oscilloscope"

AUDio MEasurement System - a multi-platfrom system for audio measurement through sound card in the PC. It contains: generator, oscilloscope, audio spectrum analyzer (FFT) and frequency sweep plot. Compiles and works under Linux, Windows and MacOS. Source code is available in "git" and as ZIP snapshot. For more information see README.md

Version 6 uses a programming paradigm based on workcells which communicate with each other using text based signals. This creates a parallel programming environment with autonomous virtual machines communicating over a peer to peer network. The workcells are instantiated anonymously, therefore all methods and variables are completely private. Tkinter is used for both GUIs and for creating a second event loop used for synchronizing workcell to workcell communication. Three classes, Hub,...

Use your pc sound card as an oscilloscope, function-generator, and UART tester.

LXARDOSCOPE is a dual channel oscilloscope application for Linux, using an ATmega328 device for data acquisition, and a serial or a USB port for communication with the PC. The Look and Feel is close to a traditional oscilloscope. Sampling rate for version 0.95 is about 2350 samples per second, for each channel. Originally designed for Arduino Uno, but works best with an Atmega328 and a TTL/USB converter. *** NEW: a preamplifier is presented which provides an input range of -4V to +6V for DC...

Get, record, display and save DSO data. RigolDso is a Java application that is useful to get data from a Rigol DS1052E digital oscilloscope. The idea is about to use the DSO for get measure (without PC control) and then easily and fastly transfer data to PC (USB) for documentation of a project. You can show data and parameters about measures save them in CSV files or (in future) bitmap, pdf, ps. I don't wish to control the DSO but read, manipulate and save data. It is a java application...

PPMScope is a do-it-yourself oscilloscope with an open source design. The intent is that the project can be constructed by an electronics hobbiest using the instructions included. The design is a compromise between features and cost. The bandwidth is lower than a commercial scope, so it's use is limited to signals of 500 kHz and below. It's sample buffer is also smaller than a commercial scope, however sufficient for most oscilloscope functions. This is a version based...

WeatherMonitoringStation is BeagleBone/Embedded Linux based software written in C++ intended to read, monitor, share and display environmental data such as temperature, humidity, wind speed etc. At this stage of development, temperature is measured using a DS18B20 sensor and sent out via standard output and/or a TCP/IP connection. Additional features will be implemented in due time. Recommended setup: * Eclipse with CDT. * GNU toolschain for ARM. * Oscilloscope. * Open collector buffer...

LXASCOPE is a dual channel oscilloscope application for Linux, using an ATmega32U4 device for data acquisition, with USB port for communication with the PC. The Look and Feel is close to a traditional oscilloscope. ATmega32U4 are used on Arduino Leonardo and Micro, Teensy2 and Adafruit breakout board, as well as many clones.

This is going to be a PC scope app for linux since I sadly noticed linux lacks of good scope apps... in 2006 but then I got distracted for a few years, and now, I realized that nothing has really changed, so I try to restart this project. First, this will be soundcard based, later it may use some kind of USB based data collection HW.

"DSO" is a Digital Signal Oscilloscope. My DSO will be connected via the USB to the PC. All software to operate the DSO is developed within this project.

A linux implementation of the software for the PCSGU250 PC-oscilloscope.

Oscilloscope set top box for PC. There are many projects like that, but we want to try to design it in our way.