Search Results for "enc28j60"

...The libbuspirate allows to quickly write a short C program to test interfacing with your favorite hardware. The library has mainly be used to interface through SPI with RF transceivers such as CC2500, MRF24J40, Ethernet controller such as ENC28J60, EEPROMs such as 24C02, 24FC1025, LCD display (PCD8544 / Nokia5110), LED display (HT1632), ... Example source code to talk with this hardware is provided.

Hog-A3XN-r es mi primer proyecto ('-A3XN-rcanOS' es el segundo y Conect-A3XN-ndo el tercero). Hog-A3XN-r se enfoca en el hogar. Probado tambien con telefonia IP. Iniciado/finalizado por unico miembro: Mauricio "A3XN" <>---}-+----------------------> (ex-alumno U.M.S.N.H, Morelia, Mexico) ----------------------------------------------------------- IMPORTANTE: DAR CLIC AL BOTON "FILES" AHI ENCONTARAS MUCHOS ARCHIVOS DISPONIBLES. SIEMPRE revisar BLOG, en este INFORMO de...

EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM.

Jumentum-SOC is a programming environment for NXP ARM microcontrollers. It turns your LPC2000 with ENC28J60-based ethernet or LPC1768/2368/2378 into an autonomous controller that is programmable through Ethernet using a BASIC-derived language.

A callback handler based ethernet stack implementation optimized for AVR microcontrollers. For now, the only controller supported is the ENC28J60. However it is easy to integrate different controllers as the interface your driver has to provide is fairly simple. Developed by the hobbyist programmers and electrical engineering students Niklas Fritz and Alexander Gladis

This is a new object-oriented networking stack for the ChipKit UNO32 and MAX32 boards. It currently supports just the ENC28J60 ethernet chip, but could easily be expanded to include other network chips. It offers a full network stack, with TCP and UDP, along with the ability to have multiple ethernet connections. Multiple sockets across multiple protocols are also possible. It has been designed to have a very simple interface to take a lot of the drudgery out of ENC28J60 programming.

Sharp MZ800 univerzalni karta periferii 1 ----------------------------------------- Contains peripherals: emulator of FDC WD279x, RTC, single channel SIO, repository manager, LAN10Mbit Chips on the card: STM32F101, XC9356, ENC28J60, FT232RL, MAX3232

EtherCircuit Webserver SW / HW Project works with AVR ATMEGA644 20MHZ with MMC /SD Card and ENC28J60 stand alone ethernetcontroller. The software is written in Mikropascal. More details on Projekt-Website.