Open Source C Robotics Software for Mac

Watchy, an open-source E-Ink smartwatch. Watchy is an E-Paper watch with open-source hardware and software. It has a barebones design utilizing the PCB as the watch body, allowing it to be worn as-is, or further customized with different 3D printed cases and watch straps. It is a unique timepiece that is also a wearable development platform, allowing users to create their own experience. Ultra-low-power e-paper 1.54″ display with 200 x 200 resolution and wide viewing angle. Wi-Fi & Bluetooth LE connectivity. 3-axis accelerometer with gesture detection. Real-time clock for accurate timekeeping with calendar and alarm functions. Built-in USB-to-serial adapter for programming on the go. Watchy comes with comprehensive documentation and Arduino code examples that demonstrate every hardware feature. New watch faces and examples are regularly added.

An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen.

This repository is now frozen. The latest version of the RepRap project can be found at https://github.com/reprap.

This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information about "Boards Managers" is available on Arduino.cc official website.

The Player Project: Player is a networked interface to robots and sensors. Stage and Gazebo are Player-friendly multiple-robot simulators. The software aims for POSIX compliance and runs on most UNIX-like OS's. Some parts also work on Windows.

openPOWERLINK is an Open Source Industrial Ethernet stack for communication in hard real-time. It can be operated as both, Managing Node (master) and Controlled Node (slave). With version 2.0, the source code has been cleanly split into an application-oriented user library and a time-critical stack driver. The latter may be moved to a dedicated communication processor or into a kernel module to deliver enhanced performance while still keeping the API in user space. A full documentation of the stack is available on the web site: http://openpowerlink.sourceforge.net The following page can be used to report a security vulnerability: https://sourceforge.net/p/openpowerlink/discussion/

This Arduino library is a native Apple HomeKit accessory implementation for the ESP8266 Arduino core and works without any additional bridges. This project is mainly based on an esp-home kit for ESP-OPEN-RTOS. I ported the RTOS-based implementation of the esp-home kit to the pure Arduino environment, aimed at easy and fast building projects using Arduino IDE (or Eclipse with sloeber, PlatformIO). Enjoy the "one-key" build, "one-key" upload, and work to link various other Arduino libraries with Apple HomeKit! This library is built with ESP8266 Arduino Core 2.6.3. Lower versions may compile with errors. For ESP32, see Arduino-HomeKit-ESP32. The HomeKit running on ESP32 has a GREAT PERFORMANCE which is 10x faster than ESP8266. You should set the ESP8266 CPU to run at 160MHz (at least during the pairing process), to avoid the tcp-socket disconnection from the iOS device caused by a timeout.

Arduino library for parsing and decoding MOD, WAV, MP3, FLAC, MIDI, AAC, and RTTL files and playing them on an I2S DAC or even using a software-simulated delta-sigma DAC with dynamic 32x-128x oversampling. ESP8266 is fully supported and most mature, but ESP32 is also mostly there with built-in DAC as well as external ones. For real-time, autonomous speech synthesis, check out ESP8266SAM, a library that uses this one and a port of an ancient format-based synthesis program to allow your ESP8266 to talk with low memory and no network required. All this code is released under the GPL, and all of it is to be used at your own risk. If you find any bugs, please let me know via the GitHub issue tracker or drop me an email. The MOD and MP3 routines were taken from StellaPlayer and libMAD respectively. The software I2S delta-sigma 32x oversampling DAC was my own creation and sounds quite good if I do say so myself.

Upload, save and run keystroke injections remotely with an ESP8266 + ATmega32u4. Using a USB device that act as a keyboard to inject keystrokes is well known these days. The USB Rubber Ducky by Hak5 is THE hacker gadget for this kind of attack. It introduced a simple script language called Ducky Script, which this project uses too. The ESP8266 is a popular Wi-Fi chip used in a lot of projects. Because it's cheap, small, and has its own file system (SPIFFS), it's perfect for enabling an easy remote connection and holding Ducky Script payloads. Although the ESP8266 is awesome, it doesn't have a native USB, which means it can't act as a keyboard. The ESP will open up a Wi-Fi access point and host a web interface from which you can upload and manage your scripts. When you hit run, it will send the script to the ATmega, which then will execute it on the target machine.

PMC is an open project that aims to build the quality permanent magnet synchronous machine (PMSM) controller for use in a variety of scopes like RC or electric transport.

FREESECS is an open-source project for SEMI SECS standards. The software is compiled with GNU autotools/GCC and runs on Linux, MacOS X, NetBSD. See http://opensecs.sourceforge.net

This is a sophisticated & integrated simulation and analysis environment for dynamical systems models of physical systems (ODEs, DAEs, maps, and hybrid systems). It supports symbolic math, optimization, continuation, data analysis, biological apps...

A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application.

XMOS based, USB2 audio card, low power consumption, small form factor, 8 synchronous input channels and 4 stereo output channels.

Create phyiscal simulations easily through IPSA which combines the OpenInventor 3D API with the Open Dynamics Engine (ODE). Scenes are read from .iv files and simulated in the supplied viewer applications. Find it at: http://ipsa.sourceforge.net

C library for robot creators using certain AVR microcontrollers with support for 3rd party hardware boards for various sensors and motor controllers. Comprehensive PDF manual included in the download. Version 2 code stream - requires that projects are created using Project Designer from my web site. If your board isn't listed in Project Designer then look at Board Designer on my web-site to create your own custom board - or if its a commercial board then let me know and, with permission, I will add your design to the release. Version 1 code stream - requires you to do everything by hand and will be discontinued in the near future.

The code in this repository is old and I don't like the sourceforge interface. You can get the code that was running in the video here: https://github.com/arduinoNube/digital-pid-classroom-demo This was a class demonstration I developed for a mechatronics class. Feel free to contact me about getting design files, code, a little help, etc. It demonstrates proportional, integral, and derivative controllers and their features as well as anti-windup and control loop update rate. It uses a DC motor controlled by an h-bridge and an optical quadrature encoder for feedback. It uses timers, counters, and interrupts to generate PWM to control the speed of the motor, encoder pulse counting, and control loop updates.

Im Rahmen der Vorlesung "Robotik" an der HTWK Leipzig soll die Hard- und Software für einen Hexapod entwickelt werden. Zur Berechnung und Steuerung eines Beinpaares wird ein Atmel XMEGA128A1-Prozessor verwendet. Als Servos werden Dynamixel AX-12 genutzt.

Open source, cross platform drivers and function library for the NovInt Falcon Haptic Controller. These drivers are not produced by Novint Technologies, Inc. and do not come with any warranty as to their correctness or usage.

HaikuVM has been started for hobbyists who develop applications for ARDUINO to open the world of JAVA and leJOS. Yes, you can program an ARDUINO with JAVA! HaikuVM is so small that it even runs on an atmega8 (and the ASURO robot). And yes, you can program an ASURO robot with JAVA! And since version 1.4.0 the RCX lego brick.

Here you can find the following Tools and libs for the famous ASURO robot. ASUROLIB: C library for the ASURO. ASURINO+ASUROBOOT: An Arduino library and Arduino/STK500v1 compatible Bootloader for the ASURO.

A parametric, feature-based, sketch-driven 3D CAD application, built around a geometrical constraint solving engine. Project is in early development stage. The FreeSG library (http://freesg.org/) is required.

Hardware, firmware, and software components for a wireless inertial measurement and control system to facilitate autonomous robotics development.

Qspline does quaternion interpolation such that the quaternion and angular rate and acceleration vectors are continuous functions of time, while maintaining quaternion normalization.

A project to host code developed for the Microtransat challenge, a race between autonomous sailing robots. This project is intended for both supporting code such as tracking systems and robot control systems or parts of robot control systems.