wirelessdriver-support — EMail-based online support for the WirelessDriver project

[Wirelessdriver-support] Panther

[mascipo <ma...@gm...>]

Hello,
I own a Blue & White Mac with a Proxim Skyline PCI farallon combo.  I
am currently using OS 10.3.4 and was wondering if there is any support
for my setup?

Regards,
Massimo

[Wirelessdriver-support] (no subject)

[Donna J. <xpr...@ho...>]

Hi i have a Novetech laptop and have recently installed BT wireless internet 
to it but i seem to have the wireless drivers missing and am a bit unsure 
what it is i need to download can you help at all.

Thank you in advance for your help

Donna

_________________________________________________________________
MSN Hotmail is evolving – check out the new Windows Live Mail 
http://ideas.live.com

[Wirelessdriver-support] .kext won't load

[J. G. <jgr...@gm...>]

Hi everyone,

i just tried to install the wireless driver package on my trusty old  
pismo (10.4.8), only to find out that the WirelessDriver.kext won't  
load. Kextload gives me this:

kld(): Undefined symbols:
_m_copydata
kextload: kld_load_from_memory() failed for module /System/Library/ 
Extensions/WirelessDriver.kext/Contents/MacOS/WirelessDriver
kextload: a link/load error occured for kernel extension /System/ 
Library/Extensions/WirelessDriver.kext
load failed for extension /System/Library/Extensions/WirelessDriver.kext

Can you help?

Thanks!

J.

[Wirelessdriver-support] wireless support on a powerbook g4

[Pat <p.j...@sy...>]

Hi

I'm new the the world of MACs and decided to try getting my lucent 
orinoco gold card configured on the powerbook.


I have installed your drivers but the Ethernet en1 option is grayed out 
along with the wireless config info.  The card does show up in the menu 
bar on the top.

Here is the output from you troubleshooting script.

Thanks for any help you can provide.

Note : I have the same symptoms with the Cisco aironet 340

Pat


Last login: Tue Oct 24 02:46:16 on ttyp1
/Users/eicon/Documents/Downloads/Troubleshooting\ Info.command; exit
Welcome to Darwin!
[TiBook:~] eicon% /Users/eicon/Documents/Downloads/Troubleshooting\ 
Info.command; exit

### kext versions

Index Refs Address    Size       Wired      Name (Version) <Linked 
Against>
    31    0 0x1123b000 0x20000    0x1f000    
com.apple.iokit.IOPCCardFamily (1.3.0)
Index Refs Address    Size       Wired      Name (Version) <Linked 
Against>

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.4
BuildVersion:   6I32
Darwin TiBook.local. 6.4 Darwin Kernel Version 6.4: Wed Jan 29 18:50:42 
PST 2003; root:xnu/xnu-344.26.obj~1/RELEASE_PPC  Power Macintosh powerpc
ppc7400
/bin:/sbin:/usr/bin:/usr/sbin

### wireless driver files installed

drwxr-xr-x   3 root   admin    102 Oct 24 01:49 SigMeter.app
drwxrwxrwx    3 root  wheel   102 Mar 20  2002 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Jan 29  2003 IOPCCardFamily.kext
drwxr-xr-x    3 root  wheel   102 Feb 28  2003 AppleAirPort.kext
drwxr-xr-x    3 root  wheel   102 Jan 29  2003 AppleAirPort2.kext
drwxr-xr-x    3 root  wheel   102 Feb 28  2003 AppleAirPortFW.kext
drwxr-xr-x   3 root  admin   102 Mar 20  2002 WirelessDriver 
PPane.prefPane
drwxr-xr-x   3 root  wheel   102 Oct 24 01:49 WirelessDriver 
PPane.prefPane

### wirelesscard info

     | |             "VersionOneInfo" = ("Lucent 
Technologies","WaveLAN/IEEE","V$
     | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
     | |             "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::230:65ff:fecc:5d00%en0 prefixlen 64 scopeid 0x4
         inet 192.168.0.102 netmask 0xffffff00 broadcast 192.168.0.255
         ether 00:30:65:cc:5d:00
         media: autoselect (10baseT/UTP <half-duplex>) status: active
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 
10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX 
<half-duplex,hw-loopback> 100baseTX <full-duplex> 100baseTX 
<full-duplex,hw-loopback>

### wd command line tool status
[Process completed]

[Wirelessdriver-support] Wallstreet, 10.2.8, wireless questions

[Thoma M. <twm...@ly...>]

I have 3 wireless cards (2 cardbus and 1 pcmcia). I am currently dualbooting OS9.2 and OS10.2.8. In 9, all 3 cards can be inserted and recognized as inserted (i.e. don't crash the system). However, I can't locate drivers that will allow me to connect wirelessly. In X, whenever I insert the cardbus cards, I get a window popup indicating (in multiple languages) that I must reboot. If I do so with the card still inserted, it freezes at the grey screen. From a brief google of the issue, I found a page indicating that 10.3 had a rom update for cardbus support in older G3 books.
<br>Cards:
<br>Lucent Technologies White (not bronze, silver, or gold) model PC24E-00-FC
<br>Proxim Orinoco Silver model8461-05
<br>Belkin Model F5D6020 version 3000
<br>
<br>Questions:
<br>1)Are there drivers that will allow me to use one of these in OS9?
<br>
<br>2)Do I have to upgrade to OS10.3 to use these in OSX?
<br>
<br>3)I am looking to get a USB/Firewire card too. Do I have to use OS9 or OSX with this?
<br>

Re: [Wirelessdriver-support] WirelessDriverBeta5_1.dmg - help

[Martin J. <mjo...@ma...>]

All three of you try running the installer for the wireless driver  
again and then reboot the mac.

[Wirelessdriver-support] WirelessDriverBeta5_1.dmg - help

[Bert T. <bte...@ch...>]

I=B9m having a problem with your driver.  This is the information I got from
the terminal window when I launched your troubleshooting info application.
Any help would be grateful.
Bert


Last login: Sun Sep 17 09:05:50 on ttyp1
/Users/bertterrinca/Desktop/Troubleshooting\ Info.command; exit
Welcome to Darwin!
[Bert-Terrincas-Computer:~] bertterrinca%
/Users/bertterrinca/Desktop/Troubleshooting\ Info.command; exit

### kext versions

Index Refs Address    Size       Wired      Name (Version) <Linked Against>
   35    1 0x14b76000 0x21000    0x20000    com.apple.iokit.IOPCCardFamily
(1.4.0)
Index Refs Address    Size       Wired      Name (Version) <Linked Against>

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.8
BuildVersion:   6R73
Darwin Bert-Terrincas-Computer.local. 6.8 Darwin Kernel Version 6.8: Wed Se=
p
10 15:20:55 PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC  Power Macintos=
h
powerpc
ppc750
/bin:/sbin:/usr/bin:/usr/sbin

### wireless driver files installed

drwxr-xr-x   3 root      admin    102 Sep 17 09:04 SigMeter.app
drwxr-xr-x    3 root  wheel   102 Sep 17 09:04 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 Sep 10  2003 IOPCCardFamily.kext
drwxr-xr-x    3 root  wheel   102 Sep 10  2003 AppleAirPort.kext
drwxr-xr-x    3 root  wheel   102 Sep 10  2003 AppleAirPort2.kext
drwxr-xr-x    3 root  wheel   102 Sep 10  2003 AppleAirPortFW.kext
drwxr-xr-x   3 root      wheel   102 Sep 17 09:04 WirelessDriver
PPane.prefPane
/bin/ls: /usr/local/bin: No such file or directory

### wirelesscard info

    | |         |   "VersionOneInfo" =3D ("Lucent
Technologies","WaveLAN/IEEE","V$
    | |       +-o pccard156,2@0,0  <class IOPCCard16Device>
    | |         |   "IOName" =3D "pccard156,2"
    | |           |   "IONameMatch" =3D
("pccardb,7300","pccardb,7100","pccardb,7$
    | |           |   "IONameMatched" =3D "pccard156,2"

### network info

lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000
gif0: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=3D0<> mtu 1280
en0: flags=3D8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::230:65ff:fe71:3e1c%en0 prefixlen 64 scopeid 0x5
        ether 00:30:65:71:3e:1c
        media: autoselect (none) status: inactive
        supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX
<half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=3D8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::202:2dff:fe2e:9882%en1 prefixlen 64 scopeid 0x6
        inet 192.168.2.80 netmask 0xffffff00 broadcast 192.168.2.255
        ether 00:02:2d:2e:98:82
        media: autoselect status: active
        supported media: autoselect

### wd command line tool status

/Users/bertterrinca/Desktop/Troubleshooting Info.command:
/usr/local/bin/WirelessConfig: No such file or directory
logout
[Process completed]

[Wirelessdriver-support] Mac OS 10.3

[Matthew G. <atw...@gm...>]

Hi ,  is there a driver for OSX 10.3 Panther ? for some reason i can not 
do anything in the wireless config panel in my prefrences .

[Wirelessdriver-support] Orinoco card on OS X 10.3

[James T. <te...@mn...>]

I have been trying, rather unsuccessfully, to install a wireless card  
on an Apple Powerbook G4 500MHz running OS X 10.3.  While all the  
documentation tells me that both of the cards I have tried should  
work, neither have so far.  At the moment, I have a Orinoco Silver in  
the slot.  All fields in the driver utility provided are greyed out,  
and no new devices appear in the network pane (in fact, en1 or any  
other device is nowhere to be found).

I ran the troubleshooting script provided in the faq.  Somebody,  
PLEASE HELP!!!!

Sincerely,
Jim






Last login: Tue Aug 29 14:41:09 on ttyp1
-bash-2.05b$ /Users/kristenewing/Desktop/Troubleshooting\  
Info.command; exit

### kext versions

/Users/kristenewing/Desktop/Troubleshooting Info.command: line 5: / 
usr/sbin/kextstat: No such file or directory
/Users/kristenewing/Desktop/Troubleshooting Info.command: line 6: / 
usr/sbin/kextstat: No such file or directory

### system info

ProductName:    Mac OS X
ProductVersion: 10.3
BuildVersion:   7B85
Darwin Kristen-Ewings-Computer.local 7.0.0 Darwin Kernel Version  
7.0.0: Wed Sep 24 15:48:39 PDT 2003; root:xnu/xnu-517.obj~1/ 
RELEASE_PPC  Power Macintosh powerpc
ppc7400
/usr/bin:/bin:/usr/sbin:/sbin:/Users/kristenewing

### wireless driver files installed

drwxr-xr-x   3 kristene  wheel    102 29 Aug 14:34 SigMeter.app
drwxr-xr-x    3 root  wheel   102 29 Aug 14:34 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 24 Sep  2003 IOPCCardFamily.kext
drwxr-xr-x    3 root  wheel   102 24 Sep  2003 AppleAirPort.kext
drwxr-xr-x    3 root  wheel   102 24 Sep  2003 AppleAirPort2.kext
drwxr-xr-x    3 root  wheel   102 24 Sep  2003 AppleAirPortFW.kext
ls: /Library/PreferencePanes: No such file or directory
drwxr-xr-x   3 kristene  wheel   102 29 Aug 14:34 WirelessDriver  
PPane.prefPane
ls: /usr/local/bin: No such file or directory
/Users/kristenewing/Desktop/Troubleshooting Info.command: line 24: / 
usr/bin/defaults: No such file or directory
/Users/kristenewing/Desktop/Troubleshooting Info.command: line 25: / 
usr/bin/defaults: No such file or directory

### wirelesscard info


### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         ether 00:03:93:55:70:32
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex>  
10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback>  
100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full- 
duplex,hw-loopback>
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 2030
         tunnel inet  -->
         lladdr 00:03:93:ff:fe:55:70:32
         media: autoselect <full-duplex> status: inactive
         supported media: autoselect <full-duplex>

### wd command line tool status

/Users/kristenewing/Desktop/Troubleshooting Info.command: line 38: / 
usr/local/bin/WirelessConfig: No such file or directory
logout
[Process completed]

[Wirelessdriver-support] PROBLEM WITH CISCO AIRONET 350

[GINA D. <gi...@ma...>]

I AM TRYING TO USE YOUR DOWNLOAD WITH A CISCO AIRONET 350 ON A 
POWERBOOK G3 (BRONZE KEYBOARD) - WHEN I OPEN THE CONFIGURATION WINDOW 
IT WON'T LET ME TYPE IN A NETWORK NAME.  I DID RESTART AND EVERYTHING. 
HERE IS THE TROUBLESHOOTING SCRIPT:

Last login: Mon Aug 14 14:34:58 on console
/Users/ginadet/Desktop/Troubleshooting\ Info.command; exit
[GINA-DETWILERs-Computer:~] ginadet% 
/Users/ginadet/Desktop/Troubleshooting\ Info.command; exit

### kext versions

/Users/ginadet/Desktop/Troubleshooting Info.command: 
/usr/sbin/kextstat: No such file or directory
/Users/ginadet/Desktop/Troubleshooting Info.command: 
/usr/sbin/kextstat: No such file or directory

### system info

ProductName:    Mac OS X
ProductVersion: 10.2.7
BuildVersion:   6R52
Darwin GINA-DETWILERs-Computer.local. 6.7 Darwin Kernel Version 6.7: 
Wed Aug 13 20:21:32 PDT 2003; root:xnu/xnu-344.47.obj~1/RELEASE_PPC  
Power Macintosh powerpc
ppc750
/bin:/sbin:/usr/bin:/usr/sbin

### wireless driver files installed

/Users/ginadet/Desktop/Troubleshooting Info.command: grep: command not 
found
/Users/ginadet/Desktop/Troubleshooting Info.command: grep: command not 
found
/Users/ginadet/Desktop/Troubleshooting Info.command: grep: command not 
found
/Users/ginadet/Desktop/Troubleshooting Info.command: grep: command not 
found
/Users/ginadet/Desktop/Troubleshooting Info.command: grep: command not 
found
/bin/ls: /Library/PreferencePanes: No such file or directory
/Users/ginadet/Desktop/Troubleshooting Info.command: grep: command not 
found
/Users/ginadet/Desktop/Troubleshooting Info.command: grep: command not 
found
/bin/ls: /usr/local/bin: No such file or directory
/Users/ginadet/Desktop/Troubleshooting Info.command: /usr/bin/defaults: 
No such file or directory
/Users/ginadet/Desktop/Troubleshooting Info.command: grep: command not 
found
/Users/ginadet/Desktop/Troubleshooting Info.command: /usr/bin/defaults: 
No such file or directory
/Users/ginadet/Desktop/Troubleshooting Info.command: grep: command not 
found

### wirelesscard info

/Users/ginadet/Desktop/Troubleshooting Info.command: grep: command not 
found
/Users/ginadet/Desktop/Troubleshooting Info.command: grep: command not 
found

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         inet6 fe80::250:e4ff:fe45:436c%en0 prefixlen 64 scopeid 0x4
         ether 00:50:e4:45:43:6c
         media: autoselect (none) status: inactive
         supported media: none autoselect 10baseT/UTP <half-duplex> 
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX 
<full-duplex>

### wd command line tool status

/Users/ginadet/Desktop/Troubleshooting Info.command: 
/usr/local/bin/WirelessConfig: No such file or directory
logout
[Process completed]

[Wirelessdriver-support] I did it once, but not again :(

[Fabio C. <xy...@ho...>]

hi!

i have a big problem, i Reinstalled my macosX. I installed 10.2 ( with no u=
pdates )

now, on the old system i had your old driver running, and it wirked great. =
but now, i searched and found the new one for 10.2... i installed multiple =
times ;) with no effect, i uninstalled, installed etc...

now, maybe the driver is installed, but is it normal when after instlal i s=
tart sys panel and go on wireles config there is NO signal strenth shown, n=
o way to type something in and in the networking tab there is only the inte=
grated ethernet shown.=20

help :) plz

here your troubleshooting scripts output:


[Marcello-Chiaramontes-Computer:~] marcellochiaramonte% /Users/marcellochia=
ramonte/Desktop/Troubleshooting\ Info.command; exit

### kext versions

Index Refs Address    Size       Wired      Name (Version) <Linked Against>
   60    0 0x1475c000 0x20000    0x1f000    com.apple.iokit.IOPCCardFamily =
(1.2)
Index Refs Address    Size       Wired      Name (Version) <Linked Against>

### system info

ProductName:    Mac OS X
ProductVersion: 10.2
BuildVersion:   6C115
Darwin Marcello-Chiaramontes-Computer.local. 6.0 Darwin Kernel Version 6.0:=
 Sat Jul 27 13:18:52 PDT 2002; root:xnu/xnu-344.obj~1/RELEASE_PPC  Power Ma=
cintosh powerpc
ppc7400
/bin:/sbin:/usr/bin:/usr/sbin

### wireless driver files installed

drwxr-xr-x   3 root      admin    102 Apr  1 11:26 SigMeter.app
drwxr-xr-x    3 root      wheel   102 Jul 27  2002 IOPCCardFamily.kext
drwxr-xr-x    3 root      wheel   102 Jul 27  2002 AppleAirPort.kext
drwxr-xr-x    3 root      wheel   102 Jul 27  2002 AppleAirPortFW.kext
drwxr-xr-x   3 root  wheel   102 Apr  1 11:26 WirelessDriver PPane.prefPane
1976-04-01 11:46:50.939 defaults[425]=20
The domain/default pair of (loginwindow, AutoLaunchedApplicationDictionary)=
 does not exist
1976-04-01 11:46:51.004 defaults[427]=20
The domain/default pair of (loginwindow, AutoLaunchedApplicationDictionary)=
 does not exist

### wirelesscard info

    | |             "VersionOneInfo" =3D ("The Linksys Group, Inc.","Instan=
t Wire$
    | |       +-o pccard274,1613@0,0  <class IOPCCard16Device>
    | |             "IOName" =3D "pccard274,1613"

### network info

lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128=20
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1=20
        inet 127.0.0.1 netmask 0xff000000=20
gif0: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=3D0<> mtu 1280
en0: flags=3D8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::203:93ff:fe10:a4e2%en0 prefixlen 64 scopeid 0x4=20
        inet 192.168.1.106 netmask 0xffffff00 broadcast 192.168.1.255
        ether 00:03:93:10:a4:e2=20
        media: autoselect (100baseTX <full-duplex>) status: active
        supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/=
UTP <half-duplex,hw-loopback> 10baseT/UTP <full-duplex> 10baseT/UTP <full-d=
uplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <half-duplex,hw-loopba=
ck> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>

### wd command line tool status

/Users/marcellochiaramonte/Desktop/Troubleshooting Info.command: /usr/local=
/bin/WirelessConfig: No such file or directory
logout
[Process completed]







i hope you can help me out!
thnks fabio
_________________________________________________________________
Testen Sie Live.com - die schnelle, personalisierte Homepage, =FCber die Si=
e auf alle f=FCr Sie relevanten Inhalte zentral zugreifen k=F6nnen.
http://www.live.com/getstarted=

[Wirelessdriver-support] Still there?

[<ws...@bo...>]

Hi - I'm running X.4.7 on a G3 Lombard PowerBook and tried using this
driver for a Farallon Skyline 11 pn473. Not having much luck, and all the
posts seem to be pre-Panther, much less Tiger.

I was wondering if anyone was still updating this, using it, or had
experience with it and Tiger...

Thanks very much!
Bill

anc...@sp...

Re: [Wirelessdriver-support] Wirelessdriver-support Digest, Vol 1, Issue 637

[Chris M. <mu...@ho...>]

If you are having problems with the Wireless Driver, you may find my support 
Wiki helpful:

http://seattlewireless.net/WirelessDriver

[Wirelessdriver-support] Airport no longer works... neither does PCMCIA card!

[Barney W. <ba...@ba...>]

I had been using an older version of your wireless driver to run my  
Avaya PCMCIA card when using KisMac.
I wanted to update the driver to the newer vesion... so i ran your  
'uninstaller' and then installed WirelessDriver beta 5.1

Now when I startup I get the message:

/System/Library/Extensions/AppleAirPort2.kext did not install  
properly and cannot be used. Please try reinstalling it or contact  
your vendor.

Yeah right, I can just imagine what apple would say!

Consequently neither my Airport card OR the Avaya PCMCIA card work (I  
don't have the option of choosing En0 or En1 or anything..)

Can anyone help? I tried copying another version of  
AppleAirPort2.kext into the extensions folder in case it had got  
corrupted, but no difference.

Regards,

Barney.

Below is output of troubleshooting script:

### kext versions

Index Refs Address    Size       Wired      Name (Version) <Linked  
Against>
    27    0 0x2136e000 0x20000    0x1f000     
com.apple.iokit.IOPCCardFamily (1.6.1)
Index Refs Address    Size       Wired      Name (Version) <Linked  
Against>

### system info

ProductName:    Mac OS X
ProductVersion: 10.4.7
BuildVersion:   8J135
Darwin laptop.local 8.7.0 Darwin Kernel Version 8.7.0: Fri May 26  
15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC Power  
Macintosh powerpc
ppc7450
/bin:/sbin:/usr/bin:/usr/sbin

### wireless driver files installed

drwxr-xr-x    3 barneywa  wheel     102 Jul  6 15:33 SigMeter.app
drwxr-xr-x     3 root      wheel   102 Sep 24  2003 IOPCCardFamily.kext
drwxr-xr-x     3 root      wheel   102 Aug  9  2005 AppleAirPort.kext
drwxr-xr-x     3 barneywa  admin   102 Aug  9  2005 AppleAirPort2.kext
drwxr-xr-x    3 barneywa  wheel   102 Aug 25  2002 WirelessDriver  
PPane.prefPane

### wirelesscard info

     | |   |         "VersionOneInfo" = ("Avaya Communication","Avaya  
Wireless P$
     | |   |   +-o pccard156,2@0,0  <class IOPCCard16Device,  
registered, matched$
     | |   |         "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
         inet 127.0.0.1 netmask 0xff000000
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
         ether 00:0a:95:b9:6d:10
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 4078
         lladdr 00:0a:95:ff:fe:b9:6d:10
         media: autoselect <full-duplex> status: inactive
         supported media: autoselect <full-duplex>

### wd command line tool status

./Troubleshooting Info.command: line 38: /usr/local/bin/ 
WirelessConfig: No such file or directory

[Wirelessdriver-support] Latest version?

[Jeff Y. <jef...@co...>]

Is the latest version of this the 1.0.9.0 version? of 6/20/2005?

Is there a later version?

[Wirelessdriver-support] Problem

[Ally H. <ali...@ya...>]

Hi,

I have some problem connecting to the internet through the driver, my powerbook can detect Avaya silver card but the interface seems inactive (can't make change or setting), here is the script:

Last login: Thu Jun  8 21:10:48 on ttyp1
/Users/ally/Desktop/Troubleshooting\ Info.command; exit
Welcome to Darwin!
ally-huangs-powerbook-g4:~ ally$ /Users/ally/Desktop/Troubleshooting\ Info.command; exit

### kext versions

Index Refs Address    Size       Wired      Name (Version) <Linked Against>
   28    1 0x736000   0x20000    0x1f000    com.apple.iokit.IOPCCardFamily (1.6.1)
Index Refs Address    Size       Wired      Name (Version) <Linked Against>

### system info

ProductName:    Mac OS X
ProductVersion: 10.4.6
BuildVersion:   8I127
Darwin ally-huangs-powerbook-g4.local 8.6.0 Darwin Kernel Version 8.6.0: Tue Mar  7 16:58:48 PST 2006; root:xnu-792.6.70.obj~1/RELEASE_PPC Power Macintosh powerpc
ppc7400
/bin:/sbin:/usr/bin:/usr/sbin

### wireless driver files installed

drwxr-xr-x    3 ally  wheel    102 Jun  8 21:04 SigMeter.app
drwxr-xr-x     3 root  wheel   102 Jun 24  2005 IOPCCardFamily.kext
drwxr-xr-x     3 root  wheel   102 Jun 24  2005 AppleAirPort.kext
drwxr-xr-x     3 root  wheel   102 Jul  9  2005 AppleAirPort2.kext
ls: /Library/PreferencePanes: No such file or directory
drwxr-xr-x    3 root  wheel   102 Aug 15  2003 Wireless Adaptor.prefPane
drwxr-xr-x    3 ally  wheel   102 Aug 25  2002 WirelessDriver PPane.prefPane
ls: /usr/local/bin: No such file or directory

### wirelesscard info

    | |             "VersionOneInfo" = ("Avaya Communication","Avaya Wireless P$
    | |       +-o pccard156,2@0,0  <class IOPCCard16Device, registered, matched$
    | |             "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        inet 127.0.0.1 netmask 0xff000000 
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ether 00:03:93:0c:b3:da 
        media: autoselect (none) status: inactive
        supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
        lladdr 00:03:93:ff:fe:0c:b3:da 
        media: autoselect <full-duplex> status: inactive
        supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::20d:88ff:fee6:c6ec%en1 prefixlen 64 scopeid 0x6 
        inet 192.168.1.107 netmask 0xffffff00 broadcast 192.168.1.255
        ether 00:0d:88:e6:c6:ec 
        media: autoselect (<unknown type>) status: active
        supported media: autoselect DS1 <half-duplex> DS2 <full-duplex> DS5 <half-duplex> DS11 <full-duplex>

### wd command line tool status

/Users/ally/Desktop/Troubleshooting Info.command: line 38: /usr/local/bin/WirelessConfig: No such file or directory
logout
[Process completed]

Thanks a lot!!
Ally

 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Wirelessdriver-support] version6

[Fred S. <fst...@ea...>]

I am presently using Beta 5.x under 10.3.9 with a WaveLAN SILVER car, 
on a Bronze PB G3...

The release notes included with Beta5 state that AppleTalk print 
services are not supported. (I've been using this for some time and 
this appears to be true.) Having reconfigured my network, I really need 
the printing from this PB.

Does version 6 support AppleTalk printing?

Is version 6 suitable for my older hardware and system level?  I.E. 
should I try it?

Thanks,
Fred Starkey

[Wirelessdriver-support] Uninstall other driver?

[bill f <bil...@ya...>]

Wireless Experts,

I've just installed OS X - Tiger on my new/used
Wallstreet (256K RAM) It works, and now I'm trying to
get my Lucent Silver Wireless card set up correctly. 

I first discovered the IOXperts driver, downloaded and
installed the driver/demo version and got it to work.
The card is currently installed and working, with 30
minute demo driver. However, it costs $20, for the
full version. 

I then discovered this free WirelessDriver. I have
downloaded and installed it. That went OK, but I can't
get it to work. In Preferences, Network, it shows
Wireless (en1), but only once, I assume it's using the
IOXperts driver and I can't find anyway to turn it off
or remove it, unintall it. 

My guess is that I need to remove the older IOXperts
driver before I can install/use the free
WirelessDriver. 

If someone is willing to help;
Do I need to remove the IOXperts driver?
How do I do that?

I ran the Wireless Config and Troubleshooting Script.
That info is pasted below, if that's helpful. 

Thank you,
Bill

-------------------------------------
WIRELESS CONFIG

Last login: Thu May  4 14:50:49 on ttyp1
/Volumes/WirelessDriver\ beta\
5.1/Utilities/WirelessConfig; exit
Welcome to Darwin!
bills-powerbook1998:~ Bill$ /Volumes/WirelessDriver\
beta\ 5.1/Utilities/WirelessConfig; exit
2006-05-04 14:51:29.067 WirelessConfig[234]
Iterations: 0
WirelessDriver: Couldn't find a WirelessDriver service
in registry - is the card loaded?
logout
[Process completed]

--------------

TROUBLESHOOTING SCRIPT

Last login: Thu May  4 14:31:07 on console
/Volumes/WirelessDriver\ beta\
5.1/Utilities/Troubleshooting\ Info.command; exit
Welcome to Darwin!
bills-powerbook1998:~ Bill$ /Volumes/WirelessDriver\
beta\ 5.1/Utilities/Troubleshooting\ Info.command;
exit

### system info

ProductName:    Mac OS X
ProductVersion: 10.4.6
BuildVersion:   8I127
Darwin bills-powerbook1998.local 8.6.0 Darwin Kernel
Version 8.6.0: Tue Mar  7 16:58:48 PST 2006;
root:xnu-792.6.70.obj~1/RELEASE_PPC Power Macintosh
powerpc
ppc750

### wireless driver files installed

drwxr-xr-x     3 root  wheel   102 Mar 26  2005
IOPCCardFamily.kext

### wirelesscard info

    |     | |   |   "VersionOneInfo" = ("Lucent
Technologies","WaveLAN/IEEE","V$
    |     +-o pccard@13  <class IOPCIDevice,
registered, matched, active, busy $
    |     | |   "name" = <"pccard">
    |     | |   "device_type" = <"pccard">
    |     | | +-o pccard156,2@0,0  <class
IOPCCard16Device, registered, matched$
    |     | |   |   "IOName" = "pccard156,2"
    |     | |     |   "IONameMatched" = "pccard156,2"
    |     | |     |   "IONameMatch" =
("pccardb,7300","pccardb,7100","pccardb,7$
    |     +-o pccard@13,1  <class IOPCIDevice,
registered, matched, active, bus$
    |       |   "name" = <"pccard">
    |       |   "device_type" = <"pccard">

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0:
flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
        ether 00:05:02:47:1c:9c
        media: autoselect (none) status: inactive
        supported media: none autoselect 10baseT/UTP
<half-duplex> 10baseT/UTP <full-duplex> 100baseTX
<half-duplex> 100baseTX <full-duplex>
en1:
flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
        inet6 fe80::202:2dff:fe2b:4355%en1 prefixlen
64 scopeid 0x5
        inet 192.168.1.201 netmask 0xffffff00
broadcast 192.168.1.255
        ether 00:02:2d:2b:43:55
        media: autoselect status: active
        supported media: autoselect

### wd command line tool status

/Volumes/WirelessDriver beta
5.1/Utilities/Troubleshooting Info.command: line 33:
WirelessConfig: command not found
logout
[Process completed]

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Wirelessdriver-support] DWL-G122 Rev A USB Wirless Card

[Jeffrey B. <jef...@gm...>]

Do these drivers work with this wireless card.  I installed them and plugge=
d
it in and nothing happens.  I'm beginning to wonder if maybe the dongle is
bad.  I might try it on a friend's pc and see if i can get it to work, but
before I do that does this driver work with this dongle?  I am runing Tiger=
.

[Wirelessdriver-support] Card compatibility.

[Justin W. <wn...@da...>]

I'm looking for a PCMCIA card to put into a Powerbook to use with the 
wireless driver.  The difficult part, however, is that the list of supported 
cards has some actual cards, and some chipsets, and websites and tech sheets 
for actual products almost /never/ actually tell you what hardware they 
used.

So my question is, does anyone on this list know of a (recent) card I can 
pick up at a local Future Shop or Best Buy or Computer store (I'm in Canada) 
that will work with the wireless driver with 40 bit WEP?

Thanks,
Justin

[Wirelessdriver-support] Demarctech Reliawave driver?

[Alex M. <ar1...@ya...>]

i was just wondering if there was ever going to be a
wireless driver that supported the demarctech
reliawave 200mW prism2.5 wireless card for macintosh.

-Al

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Wirelessdriver-support] Success with D-Link Air DWL-660

[Chris D. <biz...@ya...>]

Plug and play! On a G3 333 Lombard Powerbook with OS X
10.3.9 and a D-Link Air DWL-660. The extortionware
Orange drivers wouldn't recognise it but Wireless
driver worked straight out of the box.
Very nice work guys, I am now wireless and chuffed
silly thanks to open source software.
Cheers
El Bizarro 


		
______________________________________________ 
LLama Gratis a cualquier PC del Mundo. 
Llamadas a fijos y móviles desde 1 céntimo por minuto. 
http://es.voice.yahoo.com

[Wirelessdriver-support] Powerbook G3 + Lucent Silver problems...

[kevin <km...@pa...>]

I've read the FAQs and I'm just not making progress.  I was wondering if
someone who's been down this road before can help.

This is the output of the troubleshooting script:

------<CUT HERE>--------------------------------------------------
Last login: Mon Apr 17 11:01:16 on console
/Volumes/KSM_USB_128M/Troubleshooting\ Info.commanWelcome to Darwin!
d; exit
PBG3:~ kevin$ /Volumes/KSM_USB_128M/Troubleshooting\ Info.command; exit

### kext versions

Index Refs Address    Size       Wired      Name (Version) <Linked Against>
   27    0 0x1ae5d000 0x21000    0x20000
com.apple.iokit.IOPCCardFamily (1.5.0)
Index Refs Address    Size       Wired      Name (Version) <Linked Against>

### system info

ProductName:    Mac OS X
ProductVersion: 10.3
BuildVersion:   7B85
Darwin PBG3.local 7.0.0 Darwin Kernel Version 7.0.0: Wed Sep 24 15:48:39
PDT 2003; root:xnu/xnu-517.obj~1/RELEASE_PPC  Power Macintosh powerpc
ppc750
/bin:/sbin:/usr/bin:/usr/sbin

### wireless driver files installed

drwxr-xr-x   3 root  admin    102 17 Apr 10:59 SigMeter.app
drwxr-xr-x    3 root  wheel   102 17 Apr 10:59 WirelessDriver.kext
drwxr-xr-x    3 root  wheel   102 24 Sep  2003 IOPCCardFamily.kext
drwxr-xr-x    3 root  wheel   102 16 Apr 23:01 AppleAirPort.kext
drwxr-xr-x    3 root  wheel   102 24 Sep  2003 AppleAirPort2.kext
drwxr-xr-x    3 root  wheel   102 24 Sep  2003 AppleAirPortFW.kext
drwxr-xr-x   3 root  admin   102 17 Apr 10:59 WirelessDriver PPane.prefPane
-rwxr-xr-x  1 root  wheel  250844 17 Apr 10:59 WirelessConfig
2006-04-17 11:03:26.185 defaults[402]
The domain/default pair of (loginwindow,
AutoLaunchedApplicationDictionary) does not exist
2006-04-17 11:03:26.269 defaults[404]
The domain/default pair of (loginwindow,
AutoLaunchedApplicationDictionary) does not exist

### wirelesscard info

    |               "VersionOneInfo" = ("Lucent
Technologies","WaveLAN/IEEE","V$
    |         +-o pccard156,2@0,0  <class IOPCCard16Device, registered,
matched$
    |               "IOName" = "pccard156,2"

### network info

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::250:e4ff:fe85:4340 prefixlen 64 scopeid 0x4
        inet 169.254.191.22 netmask 0xffff0000 broadcast 169.254.255.255
        ether 00:50:e4:85:43:40
        media: autoselect (100baseTX <full-duplex>) status: active
        supported media: none autoselect 10baseT/UTP <half-duplex>
10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex>

### wd command line tool status

2006-04-17 11:03:35.559 WirelessConfig[411] Iterations: 0
WirelessDriver: Couldn't find a WirelessDriver service in registry - is
the card loaded?
Usage - /usr/local/bin/WirelessConfig [-showstatus] or
/usr/local/bin/WirelessConfig [-showstatus] <-netname <network>>
[-wepkey <key>] [-keyslot <slot>]
 -netname <name>     Sets the network name - enclose in double quotes
                      if your network contains a space.

 -wepkey <hex key>   Sets your network key, if ommited the network is
                      assumed to not have wep.

 -keyslot <[1-4]>    Sets which keyslot to have your key in. If
                      ommited keyslot 1 is assumed.

 -status             Prints out the network information, includes
                      signal strength.

 -writeprefs         Writes out the options to the preference file in
                   ~/Library/Preferences/org.noncontinuous.wirelessdriver

With no options set or just the status, /usr/local/bin/WirelessConfig
will look for the preferences made by the preference pane in
~/Library/Preferences/org.noncontinuous.WirelessDriver.
logout
[Process completed]

[Wirelessdriver-support] Problem with Tiger?

[Robert P. <bo...@pe...>]

When I upgraded to Tiger I suddenly could use AirPort for my wireless  
connection.    However, yesterday, I tried my NetGear card and it  
didn't work.  Did Tiger break the wireless driver in some way?  Is  
there a patch?

[Wirelessdriver-support] G3

[Tim G. <tg...@mi...>]

I have a powerbook G3 Bronze running on 10.2.8      I am trying to use a
wireless card     I have two    a NETGEAR 511T which when I slide in locks
the system up to the gray screen--and does the same on the reboot, but the
green activity light does come on. Then I also have a Dell TruMobile 1150
card that when I plug in the card shows up in the upper right tool bar-but
no TX light activity. I have your software downloaded but it doesn't seem to
recognize at least the Dell card. Any help or suggestions??
Thanks
Tim Gilvin