Copy left to right channel from mic input does nothing

[Pedro Waksman]

So, I'm trying to use this to copy the left channel to the right channel from my mic.
It is outputing only left channel.

wen it starts, it says that it is not installed on selected device, eventhough it is installed and already selected.

https://postimg.cc/1gZTkMPg

any tips?

that is what it have in the config file:

Device: Mic in at rear panel (Pink) Realtek(R) Audio {f2b79313-a846-4113-8ea9-7f4b79727db7}
Copy: R=L

[Juha]

Have you tried by using Stage: ?

IIRC, if you use input device command you'll have to name playback device as well (I have not used EqualizerAPO in years so memory might not serve me well in this ...).

[Peter Verbeek]

If you have installed Equalizer APO onto the mic at the Capture devices tab of the Configurator then perhaps it gets uninstalled by either the software that came with the mic or by an antimalware/firewall app that's trying to "restore" the Windows registry thereby undoing what the Configurator did after you have checked the Mic in at rear panel checkbox. Usually this happens at the restart of a computer.