first I would like to explain my settings and stuff..
I use earbuds and I have no amp or anything just earbuds,hesuvi,peace and equalizer apo when I use the earbuds normally by selecting it as default in the sounds panel it is loud and when I change the default to Vb cable input it suddenly is low even tho the windows volume is high and yes yes earbuds themselves are also on high I am using currently the cmss game hrir could u guys maybe help?
I know preamp is a thing but when I use the preamp,some frequencies are boosted but some aren't,another thing is in peace there's this volume showing thing where it shows u the peak volume when the volume goes all the way to the end the volume is supposed to clip which it sometimes does when the preamp is really high I saw that when I had the preamp set to 8db it showed me that the bar is full but it was the same the volume did not boost at all and then when I set set db to 4 it does not max that volume clipping thing and I can tell it's boosted but it's not enough
maybe someone can help I know alot of u won't understand but if u can help I will appreciate it,thanks!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
So pre amplifying isn't an option as it's already maxed out at 4 dB. Further cranking it up leads to the (expected) distortion as you have noticed. Usually there's a volume setting which is somehow set low. In this case, isn't there a volume which you get to? There must be a reason why the volume is low, usually some (hidden) volume setting set too low. If you select the VB cable as the device in Peace the volume slider below the peak value meter can be used to increase the volume.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Yeah the earbuds is showing also issue to me. As I am using earbuds when making leads campaign to covert customers for our business. But one day I tested earphones instead of earbuds which are working fine. Don't know the reason of the issue but trying to fix it. If I fixed it will definitely share the solution here.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
first I would like to explain my settings and stuff..
I use earbuds and I have no amp or anything just earbuds,hesuvi,peace and equalizer apo when I use the earbuds normally by selecting it as default in the sounds panel it is loud and when I change the default to Vb cable input it suddenly is low even tho the windows volume is high and yes yes earbuds themselves are also on high I am using currently the cmss game hrir could u guys maybe help?
I know preamp is a thing but when I use the preamp,some frequencies are boosted but some aren't,another thing is in peace there's this volume showing thing where it shows u the peak volume when the volume goes all the way to the end the volume is supposed to clip which it sometimes does when the preamp is really high I saw that when I had the preamp set to 8db it showed me that the bar is full but it was the same the volume did not boost at all and then when I set set db to 4 it does not max that volume clipping thing and I can tell it's boosted but it's not enough
maybe someone can help I know alot of u won't understand but if u can help I will appreciate it,thanks!
So pre amplifying isn't an option as it's already maxed out at 4 dB. Further cranking it up leads to the (expected) distortion as you have noticed. Usually there's a volume setting which is somehow set low. In this case, isn't there a volume which you get to? There must be a reason why the volume is low, usually some (hidden) volume setting set too low. If you select the VB cable as the device in Peace the volume slider below the peak value meter can be used to increase the volume.
Yeah the earbuds is showing also issue to me. As I am using earbuds when making leads campaign to covert customers for our business. But one day I tested earphones instead of earbuds which are working fine. Don't know the reason of the issue but trying to fix it. If I fixed it will definitely share the solution here.
Which device (driver) you're using on VB output?
What type of earbuds in question (wireless, USB, analog)?