Search Results for "tcp echo server"
Sort By:
Showing 27 open source projects for "tcp echo server"
View related business solutions-
Stop Cyber Threats with VM-Series Next-Gen Firewall on AzureGain integrated visibility across all traffic in a single pass. Deploy Palo Alto Networks VM-Series to determine application identity and content while automating security policy updates via rich APIs.
-
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
1
IEC104 Device RTU Server Simulator TCP
Simulate Complete IEC 104 RTU Server Monitor Command File transfer
v21.06.018 Complete Simulation of IEC 104 Server RTU as per Protocol Standard including File transfer (Both Monitoring and control direction). Add up to 50 server node in the simulator. Every server node will work independently. Tested with all leading commercial test tools. Support all type of Typeid ASDU, APCI, APDU, Command activation and termination commands. support all Cause of transmission (COT), Parameter in control... -
2
GPS Track Server
Simple GPS tracking server
A small server-side application is dedicated to provide TCP-packets response and basic logging functionality from operating low cost commercially available GPS Vehicle Trackers such as Concox GT06N and perhaps others (GT06E and GT06F). The application is using POSIX API and intended to run on Unix, Linux and even Windows systems (cygwin environment). -
3
myFP2ESP8266 Focus Controller
This is a port of the myFP2ESP32 Wifi Focus Controller to the ESP8266
A ESP8266 WiFi focuser. DRV8825, ULN2003, L298N, L293DMINI , L9110S, Support for Webserver, ALPACA, and TCP/IP. (c) Robert Brown 2014-2025, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to author(s). -
4
myESP32S3-N16R8 WiFi Focuser
ESP32S3_DEVKITC_1 N16R8 Wifi focuser
An ESP32S3 WiFi Focuser (ALPACA-ASCOM-LINUX-INDI-TCPIP-WINDOWS) (c) Robert Brown 2014-2026, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without credit given to authors. Read Part1 pdf to determine the board you will need, then download those board files. Downloading all files will cause confusion and hinder your project progress. Both PCB and DIY are supported. After creating the board, go to UserGuide Part2 (Files/Documents) and follow... -
Compliant and Reliable File Transfers Backed by Top Security CertificationsStop relying on non-certified, legacy file transfer tools that creak under the weight of modern security demands. Get full audit trails, advanced access controls and more supported by an award-winning team of experts. Start your free 25-day trial today.
-
5
QTester104
IEC 60870-5-104 protocol tester.
This software implements the IEC60870-5-104 protocol (client side) for substation data acquisition and control via tcp/ip network using the QT UI Framework. It can be compiled on Linux and Windows platforms. It's possible to poll and view data from the remote system (RTU) and also send commands. >>> Have a look also at my new SCADA project here: https://github.com/riclolsen/json-scada -
6
myFP2ESP32-Dev WiFi ASCOM Focuser
ASCOM-INDI ESP32-Dev Wifi focuser
An ESP32-Dev WiFi focuser. DIY or PCB designs. (c) Robert Brown 2014-2025, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to authors. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download Spreadsheets to calculate... -
7
mySQM+ DIY SQM WEATHER STATION
ESP32 mySQM+ Sky-Meter/Weather Station with loads of features
mySQM+ Sky Quality Meter/Weather Station (c) R Brown, 2020-2025, All rights reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author(s). EXPANSION BOARDS - You can expand this project using the two types of project expansion boards at https://sourceforge.net/projects/myesp-boards/ -
8
SCADA-LTS
A comprehensive Supervisory Control, Data Acquisition, and Execution
SCADA-LTS is an advanced FOSS, web-based, multi-platform environment designed to build your own Supervisory Control, Data Acquisition, and Management Execution Software - SCADA/MES. Its architecture provides a robust foundation for complex industrial automation and monitoring. Optimized for Smart Infrastructure, it is highly capable of managing industrial PV/BESS, Smart buildings, municipal Water networks or Wastewater treatment, ANPR telemetry, City-wide lighting, and other diverse data... -
9
DNP3 Protocol Linux Arm POSIX code
DNP3 Protocol Source code Library for Linux x86 x64 ARM PowerPC
v21.06.018 DNP3 Protocol Linux SDK Supports Embedded Linux (ARM, Coldfire, Power PC), Ubuntu Linux(X86, X86-64), Fedora, CentOS, Red Hat and POSIX Complaint OS The source code will allow you to quickly compile your own examples with the features of your existing development environment to work with our DNP3 library. DNP3 Linux SDK contains Shared Library(.a) (precompiled library), Static link lib, Demo Server & Client programs, CodeBlock Demo console project files, Doxygen .... -
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
10
DNP3 Protocol Win Linux test tool code
DNP3 Outstation and client simulator, Source code Library, win, Linux
DNP3 Protocol - v21.06.018 Complete implementation of DNP3 protocol standard including File transfer. Binary Input, Double-bit Binary Input, Binary Output, Counter Input, Analog Input, Analog output, Octect String, virtual terminal String. support CROB, analog output command with "select-before-operate" or "direct-execute" command execution modes Industry proven, tested with all leading test tools. DNP3 Protocol RTU Outstation Server Simulator, Client Master Simulator,... -
11
DNP3 Protocol Code Win Linux download
DNP3 Protocol Source code Library Outstation and client Win Linux
v21.06.018 Complete implementation of DNP3 protocol standard including File transfer. Binary Input, Double-bit Binary Input, Binary Output, Counter Input, Analog Input, Analog output, Octect String, virtual terminal String. support CROB, analog output command with "select-before-operate" or "direct-execute" command execution modes Industry proven, tested with all leading test tools Get a free DNP3 (IEEE 1815) Development Bundle In the Development Bundle, We included DNP3... -
12
EasyModbusTCP/UDP/RTU .NET
Modbus TCP, UDP and Modbus RTU client/server library
Modbus TCP, Modbus UDP and Modbus RTU client/server library for .NET Supports Function Codes: - Read Coils (FC1) - Read Discrete Inputs (FC2) - Read Holding Registers (FC3) - Read Input Registers (FC4) - Write Single Coil (FC5) - Write Single Register (FC6) - Write Multiple Coils (FC15) - Write Multiple Registers (FC16) V5.6: Upload lates version - This will probably the last version for .NET Framework 4.0 - The next Version will be based on new .NET5 and redesigned V5.5: Bugfixes and MQTT Bridge removed V5.0: Major Bugfixes and Event Handlers changed V4.4 HF1: Bugfix excessive CPU-Load Modbus TCP Server V4.4: Bugfix Modbus RTU and MQTT V4.3: Bugfixes Modbus RTU Webview for Modbus Server Simulator and MQTT functionality for Server -
13
JDataCom
Stream manager
Create ports : TCP/UDP/Terminal/File/RS232(txrx)/DB/System/Bluetooth/JNA/ETH(jpcap)/Sound. Simply configure with GUI/SFC XML file/CLI. Display, modify, replay, store (tcpdump), decode flow of bytes or objects. Implement : loop/echo/paddings/... and delai/DB2XML/Stacks/Matrix/... management. Stream conversations with a dynamic packet analyse. -
14
EasyModbusTCP/UDP/RTU .java
Modbus TCP, Modbus UDP and Modbus RTU client/server Java library
...V2.4: Improved Exception Handling V2.3 HF2: Bugfixes Modbus TCP Server -
15
EasyModbusTCP Server Simulator .NET/JAVA
Modbus TCP/UDP Server Simulator and Modbus RTU Slave Simulator
Modbus TCP Server simulator and library for .NET and Java implementation. See Library and source code: www.easymodbustcp.net For Connection to Modbus-TCP, Modbus-UDP clients, and Modbus RTU Master. Server listens at port 502 (can be changed). Shows also Protocol informations. Allows Multiple connections Digital Inputs; Coils; Input Registers and Holding Registers can be viewed and changed in a table-view Version V2.5: - Upgrade Library with new functions Version V1.1: - Asynchronous Reading and Writing to Speed up Server Version V1.0: - Bugfixes Version V0.96: - Bugfix - Server Simulator available as Java-Version Version V0.95: - Modbus UDP supported Version V0.94: - Some Bugfixes Version V0.93: - Added Function code 16 (Write Multiple Registers) - Some measures to speed up Modbus-Server - DLL-Library for .NET implementations added Version V0.92: - Added Function code 15 (Write Multiple Coils) -
16
ipcvis
Visualize Inter Process Communication
Small python script that can visualize Inter Process Communication on Linux. It can create a graph of TCP and Unix sockets, pipes and also process hierarchy. Short (59 sec) demo visualizing ssh client connecting to ssh server on the same Ubuntu host: http://youtu.be/8XFKwzkexQY Longer (2 min 13 sec) demo visualizing ZoneMinder surveillance solution operation (stopping, starting, enabling and viewing camera): http://youtu.be/kM7klE61Ibk Tested on Ubuntu 14.10 and Debian 7. ... -
17
Aquila
Software Architecture for Cognitive Robotics
Aquila 2.0, an open-source cross-platform software architecture for cognitive robotics that makes use of independent heterogeneous CPU-GPU modules with loosely coupled dynamically generated graphical user interfaces. -
18
Provides user level applications and supporting library for getting GPS assistance data (such as satellite ephemeris and almanac) from SUPL server using SUPL/RRLP protocol over TCP/IP.
-
19
lobots is a robot simulator featuring 3D graphics using OpenGL and GLUT libraries. It provides a client/server model, supporting multiples robot clients remotely connected on a TCP/IP network.
-
20
Seagull is a multi-protocol traffic generator. Especially targeted towards IMS, Seagull supports Diameter (RFC3588 and all applications) over TCP/SCTP and IPv4/IPv6 , TCAP (over SS7 or Sigtran), XCAP over HTTP and Radius.
-
21
network packet generator
a simple packet generator for TCP,UDP and ICMP network packages
You can create different kinds of network packages e.g. ICMP echo request, echo replies, TCP packages with different settings, ... . You can start the programm by typing 'sudo ./start_pg2.sh interfacename'. The script is necessary to suppress the rst-packets from the linux kernel. I created this program to improve my C skills and to gain some experience in network programming. It is a early version and everyone is welcome to improve it ;). -
22
Complete manufacturing automation platform for factory and process equipment. It includes multi-protocol communications (including Modbus/TCP), PLC soft logic, HMI, and tools for troubleshooting and installation in 4 comprehensive packages.
-
23
Have you ever tried to control a self developed vehicle with your PC? This Project provides a GUi Controll, the schematics for the on board electroninc (including the xbee host) and the atmega 32 / 644 / 2550 software to get things work together.
-
24
SimpleDomino is a Server for a Programming Competition from Schoolinux and Linux-dubai.com for School Students. It uses TCP/IP for Communications. (It's base on Linux but can port to Windows) You can start your own Competition or Help us to develop this P
-
25
The program implements a demo application which demonstrates using C++ stream-compatible sockets developed by Maciej Sobczak http://www.msobczak.com/
