Open Source C Molecular Science Software

The SourceForge OpenRasMol project is an adjunct to the RasMol and OpenrasMol project at http://rasmol.org. It is hoped that the SourceForge OpenRasMol project will provide a convenient focal point for active collaborative contributions.

Gabedit is a Graphical User Interface for FireFly (PC-Gamess), Gamess-US, Gaussian, Molcas, Molpro, MPQC, NWChem, OpenMopac, Orca, PSI4 and Q-Chem computational chemistry packages.

The Subread software package is a tool kit for processing next-gen sequencing data. It includes Subread aligner, Subjunc exon-exon junction detector and featureCounts read summarization program. Subread aligner can be used to align both gDNA-seq and RNA-seq reads. Subjunc aligner was specified designed for the detection of exon-exon junction. For the mapping of RNA-seq reads, Subread performs local alignments and Subjunc performs global alignments. Subread and Subjunc were published in the following paper: Yang Liao, Gordon K Smyth and Wei Shi. "The Subread aligner: fast, accurate and scalable read mapping by seed-and-vote", Nucleic Acids Research, 2013, 41(10):e108

The Sashimi project hosts the Trans-Proteomic Pipeline (TPP), a mature suite of tools for mass-spec (MS, MS/MS) based proteomics: statistical validation, quantitation, visualization, and converters from raw MS data to the open mzML/mzXML formats.

BioXTAS RAW is a program for analysis of Small-Angle X-ray Scattering (SAXS) data. The software enables: creation of 1D scattering profiles from 2D detector images, standard data operations such as averaging and subtraction, analysis of radius of gyration (Rg) and molecular weight, and advanced analysis using GNOM and DAMMIF as well as electron density reconstructions using DENSS. It also allows easy processing of inline SEC-SAXS data and data deconvolution using the evolving factor analysis (EFA) or the regularized alternating least squares (REGALS) methods. Active source code is now maintained on github: https://github.com/jbhopkins/bioxtasraw To install: Check the instructions available at: http://bioxtas-raw.readthedocs.io/en/latest/install.html and in the Files tab. User guides: RAW guides are available at: http://bioxtas-raw.readthedocs.io/ and in the Files tab. To contact us, see: https://bioxtas-raw.readthedocs.io/en/latest/help.html

EMC: Enhanced Monte Carlo; A multi-purpose modular and easy extendable solution to molecular and mesoscale simulations

This is a collection of software modifications created to integrate NanoEngineer-1, PACKMOL and MSI2LMP for the purpose of easily creating molecular dynamics cells. NanoEngineer-1 is a molecular CAD software written by Nanorex and provides the user an easy way to create molecules, while the software modifications allow the user to type atoms using multiple force fields. PACKMOL can generate a random collection of molecules using the molecule templates from NanoEngineer-1 thus providing the initial MD cell. Modifications to PACKMOL allow the atom type data to be passed through to the MSI2LMP software. MSI2LMP creates a LAMMPS input file based on class I or class II force fields. MSI2LMP was modified to use numerically coded force field data generated by NanoEngineer-1. The MMP file format was extended and integrated into all three software applications. http://www.nanoengineer-1.net http://www.ime.unicamp.br/~martinez/packmol/ http://lammps.sandia.gov/

RasTop is a molecular graphics program intended for the visualisation of proteins, nucleic acids and small molecules based on the popular Rasmol software. The program is aimed at the rapid visualization and analysis of molecules.

Open3DQSAR is a free, open-source tool written in C aimed at pharmacophore exploration by high-throughput chemometric analysis of molecular interaction fields (MIFs).

This space is not maintained anymore. If you want to get the latest updates on fpocket refer to https://github.com/Discngine/fpocket. Fpocket is a very fast open source protein pocket detection algorithm based on Voronoi tessellation. The platform is suited for the scientific community willing to develop new scoring functions and extract pocket descriptors on a large scale level.

Luscus is the program for graphical display and editing of molecular systems. The program allows fast and easy building and/or editing different molecular structures, up to several thousands of atoms large. Luscus can also visualize dipole moments, normal modes, molecular orbitals, electron densities and electrostatic potentials. In addition, simple geometrical objects can be rendered in order to point out a geometrical feature or a physical quantity. The program is developed as a graphical interface for MOLCAS program package, however it's adaptive nature makes possible using luscus with other computational program packages and chemical formats. If you use this program, please cite: G. Kovačević, V. Veryazov, J. Cheminformatics, 7 (2015) 1-10; DOI: 10.1186/s13321-015-0060-z

MELTING is a software to compute, for a nucleic acid duplex, the enthalpy and the entropy of the helix coil transition and then the melting temperature. Four types of hybridization are possible : DNA/DNA, RNA/RNA, RNA/DNA and mRNA/RNA.

The software package 'relax' is designed for the study of molecular dynamics through the analysis of experimental NMR data. Organic molecules, proteins, RNA, DNA, sugars, and other biomolecules are all supported. It supports exponential curve fitting for the calculation of the R1 and R2 relaxation rates, calculation of the NOE, reduced spectral density mapping, the Lipari and Szabo model-free analysis, study of domain motions via the N-state model and frame order dynamics theories using anisotropic NMR parameters such as RDCs and PCSs, the investigation of stereochemistry in dynamic ensembles, and the analysis of relaxation dispersion data.

NanoCap is a generic application for the construction of low energy fullerene and capped nanotube structures. It provides an ideal tool to accompany the study of finite carbon molecules using computer simulation. The implementation involves a standalone application which includes a GUI and allows for dynamic visual inspection through 3D rendering. In addition, the NanoCap core libraries can be used in custom Python scripts that enabled the user to produce structures in bulk or to include the structure generation routines into pre-existing code.

Although many potential applications exist in chemistry and material science, software to allow the general application of de novo structure-based design methods in supramolecular chemistry was non-existent. To address this limitation we created HostDesigner, a code that builds and evaluates millions of molecules in minutes. This command line executable builds 3D molecular structures by covalently connecting user-defined input fragments with pre-computed hydrocarbon fragments from a library. The results are ranked with respect to desired geometric constraints defined by the user. See the User's Manual for further details including a list of literature citations for example applications. Download includes User's Manual, HostDesigner 4.3 source code (in Fortran), data files, example input, HDViewer executables for MacOS, Linux, and Windows, and mengine source code (in C). HostDesigner was developed and posted by author Dr. Benjamin P Hay

Simulator for transmission electron microscope images and tilt series of biological samples.

Software and codes created in "Laboratorio de Química Computacional" of "Facultad de Ciencias y Tecnología" of "Universidad de Carabobo"

NOC is a open source development toolkit and a powerful molecular explorer for protein structure visualizing,analysis,crystallographic mapping, modeling, and refinement, Gromacs/Amber MD trajectories displaying,movie making...

SeaBreeze is a device driver library that provides an interface to select Ocean Optics spectrometers. It is written in C/C++ and builds and runs on Windows (XP/7/8), MacOSX, and Linux (x86/x64/ARM).

PSI is an open-source program for computing molecular properties using high-accuracy, ab initio, quantum mechanical models.

An open-source software aimed at unsupervised molecular alignment

PUPIL (Program for User Package Interface and Linking), is a software environment that allows developers to link quickly and efficiently together multiple pieces of software in a fully automated multi-scale simulation. More specifically, it supports QM/MM MD simulations where the user might choose among any of the different MD engines and QM engines, which are connected to PUPIL as external programs through a tiny specific interface. One of the main advantages here is that the user can use most of the functionalities that may have those external programs interfaced without the necessity to be reimplemented again on independent interfaces. In fact, this simulation interface concentrates all the common code involved in the coupling terms of the QM/MM approach.

Sample code demonstrating how to use OmniDriver to drive Ocean Optics full range of spectrometers from C, C++, C#, Java, LabVIEW, Delphi, MATLAB and more.

QMGA is a Qt-based molecular graphics application for visualizing large ensembles of ellipsoids, spherocylinders or spheres. It is conceived for coarse-grained mesoscopic molecular simulation, but can be used for any kind of convex body systems.

Tahoe is a research-oriented platform for the development of numerical methods and models for the simulation of complex material behavior.