Open Source Hardware Platforms - Page 3
Sort By:
Hardware Platforms
View 172 business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
Full-stack observability with actually useful AI | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
1
midisport-macos
M-Audio MIDISPORT USB 64-bit MIDI device driver for MacOS v10.14+
This project provides an open source MacOS v10.14+ (Mojave and above) compatible CoreMIDI Universal 64 bit device driver for M-Audio's MIDISPORT range of USB MIDI interfaces. This driver supports the following devices: MIDISPORT 1x1 MIDISPORT 2x2 MIDISPORT 4x4 MIDISPORT 8x8/S Oxygen 8 Keyboard Other devices which are compatible may also work, although presently, these are the only ones which have been tested. -
2
The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.
-
3
USB Gadget Tool
Convert your Android phone to any USB device you like
Convert your Android phone to any USB device you like. USB Gadget Tool allows you to create and activate USB device roles, like a mouse or a keyboard. Connected USB hosts (e.g. a normal computer) will then identify your Android device only under that role. It can also be used to deactivate the standard USB Gadget (including mtp, adb, etc.), e.g. for security reasons. -
4
SpeedFan
SpeedFan is an advanced system monitoring tool
SpeedFan lets you take a deeper view at the status of your computer. Almost every computer includes support for hardware monitoring. Accessing digital temperature sensors is really useful. If you are trying to figure out why your PC hangs when under heavy load or after some hours of usage, SpeedFan might help you find the real cause. Very often it is a poor power supply, or an improperly installed heatsink that lead to behaviours that we tend to associate (incorrectly) with errors from the operating system. SpeedFan automatically searches your computer for informative chips: the hardware monitor chips. SpeedFan can display voltages, fan speeds and temperatures. On rare occasions, the BIOS doesn't activate such features. SpeedFan tries to enable them as long as this is a safe thing to do. Not only the motherboard is searched, but also some video cards and almost every currently sold hard disk. SpeedFan can access status info from EIDE, SATA and even SCSI drives -
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
5
WLan Driver 802.11n Rel. 4.80.28.7.zip is a compressed file containing drivers for a wireless network adapter that supports the 802.11n Wi-Fi standard. These drivers enable your computer to communicate with and control the Wi-Fi hardware, allowing it to connect to wireless networks. To install it, you would unzip the file and run the installer or manually update the driver through your system’s device manager. The WLan Driver 802.11n Rel. 4.80.28.7.zip is typically for wireless network adapters that support the 802.11n Wi-Fi standard. These adapters could be internal (like those built into laptops or desktop motherboards) or external (such as USB Wi-Fi dongles). Specifically, the driver is commonly associated with devices that use certain chipsets, like those made by companies such as Realtek, Atheros, Ralink, or Broadcom.
-
6
roccat
Roccat hardware support for Linux
This project will provide information and software to get hardware from the manufacturer Roccat to work under linux. -
7
ATTENTION: This project is not maintained anymore. Current Macs properly manage temperature and fans. Speed fan controller and temp monitoring for MacBook Pro Unibody (Nvidia) for Windows under BootCamp. It allows to control MacBook fans speeds depending on the CPU and GPU temperature. ATTENTION: This program is designed and tested only on MacBook Pro with NVIDIA GPU. On newer MacBooks with ATI GPU the GPU temperature is not checked. On iMacs some sensors and fans are not used. In any case USE AT YOUR OWN RISK, I'm not responsible for overheating or hardware damage.
-
8
Kanata
Improve keyboard comfort and usability with advanced customization
This is a cross-platform software keyboard remapper for Linux, macOS, and Windows. Improve your keyboard comfort. What Kanata allows you to do is take this alternate layer concept that Shift keys have and apply it to any key. You can then customize what those layers do to suit your exact needs and workflows. Running Kanata currently does not start it in a background process. You will need to keep the window that starts Kanata running to keep Kanata active. -
9
-
Go From AI Idea to AI App FastAccess Gemini 3 and 200+ models. Build chatbots, agents, or custom models with built-in monitoring and scaling.
-
10
SnapKey
SnapKey: Open Source Alternative to Snap Tap & SOCD
SnapKey is a lightweight, open-source tool that operates from the system tray and is designed to track inputs from the WASD keys, without interfering with any game files. SnapKey's main role is to recognize when these keys are pressed and automatically release any previously engaged commands for them. This guarantees responsive and precise input handling. SnapKey handles the WASD keys by default and lets you rebind them to your liking via the config file. SnapKey: Open Source Alternative to Snap Tap & SOCD Visit SnapKey on GitHub for more information: https://github.com/cafali/SnapKey -
11
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in the data directory but UI has its own repository ESP3D-WEBUI. Use GPIO2 to the ground to reset all settings in a hard way, 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW. Currently, boot takes 10 sec - giving 8 seconds to connect GPIO2 to GND and do a hard recovery for settings. Complete configuration by web browser (Station or Access point) or by Serial/telnet commands. -
12
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
-
13
BRL-CAD
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools. -
14
Mos
A lightweight tool used to smooth scrolling and set scroll direction
A lightweight tool used to smooth scrolling and set scroll direction independently for your mouse on MacOS. Mos separates the touchpad and mouse scrolls independently, then, you can set the direction of the touchpad and mouse wheel separately. Also, Mos provides smooth scrolling for your mouse, whether you are a Windows user or a MacOS, you can move freely. Mos's special interpolation algorithm can make every mouse roll as smooth and silky as possible. Mos can independently manage the scrolling behavior of each application. For some annoying programs, we help you. -
15
VirtScreen
Make your iPad/tablet/computer into a secondary monitor on Linux
Make your iPad/tablet/computer a secondary monitor on Linux. VirtScreen is an easy-to-use Linux GUI app that creates a virtual secondary screen and shares it through VNC. VirtScreen is based on PyQt5 and asyncio on the Python side and uses x11vnc and XRandR. -
16
LIRC
Linux Infrared Remote Control
LIRC is a package that supports receiving and sending IR signals of IR remote controls, adding functionality and flexibility to the basic support in the Linux kernel. Support for LIRC is ubiquitous in Linux HTPC applications; it's also packaged in all major Linux distributions. Despite it's name, LIRC also works on OSX. -
17
TComPort by Dejan Crnila. Delphi/C++ Builder serial communications components. It is generally easy to use for basic Serial Communications purposes. Alternative to the TurboPower ASYNCPro at http://sourceforge.net/projects/tpapro/
-
18
Linux GPIB Support
Linux GPIB Driver package (source)
The Linux GPIB Package is a support package for GPIB (IEEE 488.2) hardware. The package contains a development environment consisting of a GPIB library written in C, kernel driver modules, and bindings for several other languages. -
19
GLDirect is the utility package for Windows 95/98/Me/2000/XP that enables OpenGL based games and applications to access 3D hardware acceleration through the Direct3D drivers provided by your graphics hardware manufacturer.
-
20
USB Rubber Ducky
A human interface device programmable
The USB Rubber Ducky is a Human Interface Device programmable with a simple scripting language allowing penetration testers to quickly and easily craft and deploy security auditing payloads that mimic human keyboard input. The source is written in C and requires the AVR Studio 5 IDE from atmel.com/avrstudio. Hardware is commercially available. Imagine plugging in a seemingly innocent USB drive into a computer and installing backdoors, exfiltrating documents, or capturing credentials. With a few well crafted keystrokes anything is possible. If only you had a few minutes, photographic memory and perfect typing accuracy. The USB Rubber Ducky injects keystrokes at superhuman speeds, violating the inherent trust computers have in humans by posing as a keyboard. Inventing keystroke injection in 2010, the USB Rubber Ducky became the must-have pentest tool. With a covert design and simple "Ducky Script" language, this bad USB infiltrates systems and imaginations the world over. -
21
WinLIRC, the Windows port of the Linux Infrared Remote Control package. Control your computer via remote!
-
22
Open Programmer
An USB programmer for PIC, dsPIC, AVR, serial memories
An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms -
23
Synergy Core
The keyboard and mouse sharing tool
This is the open source core component of Synergy, a keyboard and mouse sharing tool. Control your computers with one mouse and keyboard. Control multiple computers using only one keyboard and mouse. Focus on developing software, designing, gaming and remove time switching between operating systems. Throw away the extra keyboards and spend time where it really matters. Simplify your workspace by combining multiple computers into one. Easily copy and paste between computers with no effort at all. Keep your passwords and sensitive data secure with TLS encryption. Key, mouse and data all sent fast and securely, directly over your local network. Advanced customization settings give you complete control of your setup. The next version is being built from the ground up by combining the latest technologies, Node.js and React, with the rock-solid stability of C++. -
24
The Open IPMI project aims to develop an open code base to allow access to platform information using Intelligent Platform Management Interface (IPMI).
-
25
Arduino core support for STM32
STM32 core support for Arduino
This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information about "Boards Managers" is available on Arduino.cc official website.
