Open Source Assembly Hardware Platforms

The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets.

myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 315,606+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2026. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - https://sourceforge.net/projects/myfp2esp8266-focus-controller/ myFP2N - Nextion touch screen display - https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2N%20NEXTION%20TFT%20DISPLAY/ myFP2M - Ready made Controllers https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2M/ Please look in the Files-Documents folder for more information. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/

An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms

The Xbox Linux Project aims to privide a version of GNU/Linux for the Xbox, so that it can be used as an ordinary computer. Linux should make use of all Xbox hardware and allow to install and run software from standard i386 Linux distributions.

A free replacement firmware for the T/S 2000 derived from the T/S 1000 ROM.

A port of the Linux operating system kernel and assorted GNU userspace to the GameCube and Wii gaming consoles from Nintendo. Please, see http://www.gc-linux.org for additional information.

myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download

Please NOTE: The repository at SourceForge is retired! For the latest source, releases, bug tracking, use https://github.com/OpenCBM/OpenCBM instead! Win NT/2K/XP/7/8/10/11, Linux/i386/AMD64/ARM, FreeBSD and MacOS X kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4linux. Also supports the XU1541 and the XUM1541 USB devices (a.k.a. "ZoomFloppy").

JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.

QuickMAN is a Mandelbrot fractal generator with multicore support. ASM-optimized code can reach over 100 billion iterations per second. Features an easy-to-use GUI, realtime pan/zoom, multiple palettes, image logging, and saving in PNG format.

Sulin is rolling donkey Gitlab: https://gitlab.com/sulinos Github: https://github.com/sulinos Telegram: https://t.me/sulinos powered by donkey team

This is HimemX - the open-source XMS memory manager of FreeDOS. Uses unreal mode when possible and has a very low conventional memory footprint. Got any patches? Noticed any bugs? Please report your findings on the FreeDOS mailing list: freedos-user@lists.sourceforge.net

CuteMouse is a DOS based mouse driver, fully written in assembly language. It's optimized for size (and speed) to allocate as small as possible amount of your precious 640KB RAM. It currently supports serial and PS/2 mice and, if BIOS support present an

XMK is a preemptive multitasking kernel for microcontrollers. Its goal is to provide a RTOS small enough (RAM+ROM) to run on 8bit microcontrollers. XMK provides additional/optional features when scaling up to 16bit and 32bit platforms.

TTF-GDOS is a GDOS replacement that uses true type fonts as well as gem fonts. It is small, fast & efficient and can easily be used without a hard drive. It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big benefits: - you can choose from a vast range of true type fonts - true type fonts are scalable so you can have almost any size font you want - true type fonts need much less disk storage than typical gem printer fonts, so even on a low spec machine you can use lots of fonts. Gem fonts and true type fonts complement each other perfectly - gem fonts are small and fast, while true type fonts are device and resolution independent so are scalable to any point size at any resolution.

Parallel Events and Asynchronous tasKing Library. Originally combining multi-threading with an efficient I/O event model, it's now more a lightweight object-oriented framework for event-based applications.

This is a DOS driver to access CD/DVD in Optical Disk Drive used on Intel Desktop boards during bootup to MS-DOS.

Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. A fast disk copier included.

The first true nanokernel for x86 that gives a unix prompt on a real bourne shell in respect of all security rules!

GXSM -- Gnome X Scanning Microscopy: A multi-channel image and vector-probe data acquisition and visualization system designed for SPM techniques (STM,AFM..), but also SPA-LEED/LEED/LEEM data analysis. A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports a commercially available DSP hardware and provided also Open Source Code for all the low level signal processing tasks and instrument controls in a most flexible and adaptable manner. All latest software is available via github.com/pyzahl/Gxsm4 (source code) or as binary for Ubuntu on https://launchpad.net/~totto/+archive/ubuntu/gxsm

Operating system project from scratch to design and implement all components from boot strapping,hardware interrupts , memory manger ,file system , etc .

The aim of this project is to develop a modular operating system for the i386 architecture, where each device driver, file system, etc, will be a module that can be loaded and unloaded at run-time from the system.

Software for a van eck phreaking device. Please use to test security only. <a href="http://searchsecurity.techtarget.com/sDefinition/0,,sid14_gci550525,00.html">Here</a>'s an explanation if you don't know what van eck phreaking is.

The openwince project collects free (open source) software tools, modules, applications, drivers, and so on for Windows CE platform developers. Some of the modules are usable outside Windows CE development environment and are platform independent.

Clicker is a project for a Multitasking Open-source operating system written from scratch. based on a modular micro kernel. We want to explore new way of designing and using OSes :) [newz: PCI, NE2K and VBE]