Open Source Embedded Operating Systems Hardware Platforms

hdparm - get/set ATA/SATA drive parameters under Linux

Library to enable user space application programs to communicate with USB devices

i-Blue 747 / i-Blue 757 / Qstarz BT-Q1000 / i.Trek Z1 / Konet BGL-32 / Holux M-241 / ... control SW (for Java Phones, PalmOS, WinCe (PPC), Java platforms, Windows, Linux, and MacOS). Compatible with most MTK GPS Chipset based loggers.

A Linux port of the OpenBSD/FreeBSD Cryptographic Framework (OCF). This port aims to bring full asynchronous HW/SW crypto acceleration to the Linux kernel, OpenSwan, OpenSSL and applications using DES, 3DES, AES, MD5, SHA, PublicKey, RNGs and more.

libusbx is OBSOLETE and has been superseded by http://libusb.info

mochad is a Linux TCP gateway daemon for the X10 CM15A RF (radio frequency) and PL (power line) controller and the CM19A RF controller.

The openwince project collects free (open source) software tools, modules, applications, drivers, and so on for Windows CE platform developers. Some of the modules are usable outside Windows CE development environment and are platform independent.

CanFestival focuses on providing an ANSI-C platform independent CANOpen stack that can be implemented as master or slave nodes on PCs, Real-time IPCs, and Microcontrollers. A WxPython based CanOpen Object Dictionary editor GUI is also provided.

C version of PimucHA for OpenWRT PimucHA : Python integrated multi controllers Home Automation For CM11A, CM15A(CM15Pro), RFXcomRX, RFXtrx433, TellStick Duo, ATI Remote X10 receiver. Next version at https://github.com/domovilam/pimuchad

For Freescale HAL development before it is accepted into the eCos CVS. Mainly Kinetis and iMX6 SMP work.

IXP4xx (IXP425, 422, 421, 420) BSP for Windows CE (wince/Windows Embedded Compact) 4.2/5.0/6.0/7.0

Hardware acceleration support for the ATI IMAGEON 100 graphic card.

This is the Linux kernel driver for the stmpe2401 and stmpe2402 GPIO expanders from ST Microelectronics. These i2c chips support up to 24 extra GPIO lines, have 3 programmable PWM outputs, an integrated keypad input, and rotator input controllers.

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

A QNX-based library and tools for controlling Märklin Digital model railroads over a serial interface. The Project includes a shell for interactive control and also bootable floppy disk image to easily turn any pc into a dedicated railroad controller.

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

The software package repository for <a href=http://sourceforge.net/projects/fsos>FsOS</a>, including EP80579 drivers, SempSec drivers, linux kernel patches and a lot of porting applications for FsOS

the goal of this project is to build a stack for Lonworks Protocol and device working on this protocol

Small battery meter and memory/storage card status display for Windows Mobile 2003 and WM 2003 Second Edition PocketPC devices. Supports VGA resolution. Shows battery meter in the top taskbar, configurable, can replace clock by clock+battery meter.

This project is to produce drivers to run Linux on the Pocket LOOX 600 of Fujitsu-Siemens Computer and to collect software and documentation to use the PDA on Linux.

A replacement firmware distribution for the 3com 3CRADSL72 a.k.a 3com wireless 11g (distributed by Ya.com) and its identical twin, the SMC7804WBRA, with an ucLinux kernel based system and associated system tools.

MyVGA is a program to switch video-modes of Toshiba e800 Pocket PC (QVGA, VGA, portrait, landscape) and automatically save/restore settings of other applications, related to applied video-mode, such as fontsizes, etc..

Replacement firmware for the Humax iCord HD, a BCM7403 based dual tuner HDTV settop box with harddisk pvr, already based on linux 2.6.

This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating unnecessary bottlenecks. The tools described in this project enable the hardware engineer to develop DPR-FPGA systems more effectively for rapid control system development. For more information, related papers and user guide, please refer to: - https://sourceforge.net/p/prhardware/wiki/Home/ - http://www2.ensc.sfu.ca/research/iDEA/personel/victor_lesau.htm

Project Fish is a start kit for those who want to have study with ARM/PCB/DDK/.Net. PF will start from a Digital thermometer, with the implement of Hard ware design, firmware, Windows driver and app, the participator will got understading in that fields.