Search Results for "i2c"

Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C

A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older...

...The .7z download is a much smaller file size. https://sourceforge.net/p/sevenzip/ uEZ v2.15.000 updates: Crossworks v5.1, IAR v9.60.3, MbedTLS/CorePKCS11 v3.6.2 with TSL 1.3, full FTP Server, FreeRTOS v11.0.1, auto-expanding heap, time.h include workaround uEZ v2.16.000 updates: Crossworks v5.3, IAR v9.70.2, emWin v6.50, MbedTLS v3.6.5, FreeRTOS v11.2.0, RTT/SystemView Multi-Core support uEZ v2.16.001 updates: Apply this patch over uEZ v2.16.000 to get new SPI flash and I2C external RTC drivers

Basic Octave implementation of the matlab raspi extension, allowing communication to a Raspberry Pi board to control its hardware.

This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features.

...It takes power from C++ language. It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library.

Tutorial de como utilizar SDCC con el PIC18F4550. Incluir ejemplos de funciones particulares: adc, spi, i2c, usart, usb, atención a interrupciones etc.

The project's main goal is to create a component, capable of being added to Freesacle's Codewarrior environment with XBee stack, in order for adding a complete implementation of the ADS1115 functionalities to Digi's XBee radios

Vanilla Kernel support only embedded flash and DM9000 Ethernet controller. This project extend support perepherial on Toradex, Orchild and other evaluation board, and may be, some embedded applications.

Ddr-Z8E is a device driver library for the Zilog Z8 Encore!(r) microcontroller. The library supports I/O, IRQ, RS-232, I2C, SPI, A/D, WDT, ticker and built in flash memory as well as utility modules, e.g. for debugging and binary number representation.