Search Results for "i2c"
Sort By:
Showing 72 open source projects for "i2c"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
PRTG Catches Network Issues Before They Cause DowntimeReactive troubleshooting usually means hearing about a problem from frustrated users, not your monitoring tool. PRTG sets threshold-based alerts across devices, servers and applications, notifying your team by email, SMS or push the moment a metric crosses a set limit. That means catching a failing disk or overloaded server before it becomes an outage and getting time back from firefighting. Start a free trial and set your first alerts today.
-
1
ESP32 Bit Pirate
A Hardware Hacking Tool with Web-Based CLI That Speaks Every Protocol
ESP32 Bit Pirate is open-source firmware that turns supported ESP32 devices into portable hardware development and analysis tools. Inspired by the Bus Pirate, it communicates with digital buses such as I2C, SPI, UART, 1-Wire, CAN, and direct GPIO. It also supports wireless and radio technologies including Wi-Fi, Bluetooth, Sub-GHz, RFID, infrared, and RF24. Users can interact through a USB serial terminal, a Wi-Fi web command line, or a standalone screen and keyboard on compatible hardware. The firmware can sniff traffic, send data, read memory devices, scan interfaces, manipulate pins, and automate operations with scripts. ... -
2
Soft I2c Master Uni I2C Library 8051/AVR
Soft I2C Universal Arduino AVR or 8051 Device for Arduino(R) IDE
Soft I2C Universal Arduino AVR or 8051 Device ============================================= V.0.0.2 Universal Arduino library for I2C emulating port. Arduino achitectures : AVR, 8051, STC89C51, STC89C52... See too : https://sourceforge.net/projects/stc89/ Very easy using. See examples. #Donate for development support https://bacciel.com/donate/donate.html Many thanks * DISLCAIMER OF ALL WARRANTIES * -
3
Soft SSD1306 Uni Library 8051/AVR
Soft SSD1306 by I2C AVR or 8051 Universal Arduino(R) IDE
Soft SSD1306 by I2C Universal Arduino AVR or 8051 Device ======================================================== V.0.0.1 Universal Arduino library for SSD1306 Display by I2C Arduino achitectures : AVR, 8051, STC89C51, STC89C52... See too : https://sourceforge.net/projects/stc89/ Very easy using. See examples. #Donate for development support https://bacciel.com/donate/donate.html Many thanks * DISLAIMER OF ALL WARRANTIES * -
4
ScriptCommunicator / serial terminal
Scriptable data terminal which supports several interfaces.
ScriptCommunicator is a scriptable cross-platform data terminal that supports serial port (RS232, USB to serial), UDP, TCP client/server, SPI, I2C, and CAN. All sent and received data can be shown in a console and can be logged in an html and a text log. In addition to the simple sending and receiving of data, ScriptCommunicator has a JavaScript interface. This script interface has the following features: - Scripts can send and receive data with the main interface. - In addition to the main interface scripts can create and use their own interfaces (serial port (RS232, USB to serial), UDP, TCP client, TCP server, PCAN, and SPI/I2C) -
Veeam Data Platform v13.1 - Get Your Free TrialTry Veeam Data Platform today. Experience the unified platform that's secure by design, portable by default, and proven to recover clean, fast, and anywhere.
-
5
GeigerLog
Python program for Geiger counters and Environmental Sensors
...Continues to support Geiger counters like GQ Electronic's GMC-300/500/600 , RadMon, RadPro, Gamma-Scout, audio-click and other low-cost Geiger counters, IoT devices, I2C based sensors, GQ EMF devices. GeigerLog reads data from devices, saves them to databases, prints to screen and plots as auto-updated, customizable graphs. Quality control using Statistics, Scatter, Poisson, FFT & Autocorrelation, and more. Gamma Spectra - can be displayed, calibrated, and evaluated in GeigerLog! The Raspberry Pi 4, 5 qualify as GeigerLog hosts. -
6
CH347 Multi-Function Interface Demo Sof
CH347 Multi-Function Interface Demo Software
The CH347 multi-functional interface demonstration software is an open-source debugging tool that integrates six core functions: SPI, I2C, JTAG, SWD, UART, and GPIO. It comprehensively covers the core communication protocols and peripheral control scenarios of the CH347 chip. Each chapter of the software demonstrates the functions of each interface. The I2C interface implements temperature and humidity sensor data acquisition, the JTAG and SWD interfaces complete program download and debugging for FPGA and MCU, the UART interface meets basic serial communication requirements, the GPIO interface adapts to peripheral control pins, and the SPI interface drives the ST7798 LCD screen and implements image polling display. ... -
7
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
8
myESP32-DB Daughter Board
ESP32 Controller designed to integrate with iOT devices.
myESP32DB - a remote ESP32 daughter board with I2C, Relays and Digital Pins. Fully configurable. Supports web server, management interface for configuration, espnow, json, mqtt and xhtml. ASCOM Switch and Safety Monitor Drivers included, https://sourceforge.net/projects/myesp-boards/files/myESP32DB/ myESP01-Relay - has moved https://sourceforge.net/projects/myesp-boards/files/myESP01-Relay/ (c) Copyright R Brown, 2021-2025. -
9
Arduino Nano Dew Controller Pro (DIY)
Dew Controller Feature Rich
A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older... -
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
10
uEZ
Open Source middleware platform with FreeRTOS, processor abstraction
...The .7z download is a much smaller file size. https://sourceforge.net/p/sevenzip/ uEZ v2.15.000 updates: Crossworks v5.1, IAR v9.60.3, MbedTLS/CorePKCS11 v3.6.2 with TSL 1.3, full FTP Server, FreeRTOS v11.0.1, auto-expanding heap, time.h include workaround uEZ v2.16.000 updates: Crossworks v5.3, IAR v9.70.2, emWin v6.50, MbedTLS v3.6.5, FreeRTOS v11.2.0, RTT/SystemView Multi-Core support uEZ v2.16.001 updates: Apply this patch over uEZ v2.16.000 to get new SPI flash and I2C external RTC drivers -
11
Monsputer project
Documentation for the Z80 monsputer
The Monsputer is a Z80 computer developped with old chips (and some new) collected over the years. It has about 2M memory, clocks at 4.0MHz, has serial ports, 1 parallel port, 1 CAN bus, 2 SPI, 1 I2C, a RTC and other features. It supports interrupts mode 2 but not DMA. -
12
Arduino ASCOM Focuser Pro DIY
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download -
13
octave-raspberrypi
GNU Octave toolkit for controlling a Raspberry Pi
Basic Octave implementation of the matlab raspi extension, allowing communication to a Raspberry Pi board to control its hardware. -
14
QistasLinks-Serial-Communication-Library
The perfect solution for projects that depend on serial communications
QistasLinks: C# library, make serial interface(RS232) communication easy and efficient for any project utilizing a serial connection. With its user-friendly methods and robust features, QistasLinks simplifies the process of establishing communication with microcontrollers and facilitates seamless data exchange, By integrating QistasLinks into your application, you can benefit from enhanced performance and extended capabilities, making it the ideal choice for any project relying on serial... -
15
ESP8266 Arduino Core
ESP8266 core for Arduino
...It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS servers; and it can perform OTA updates. ESP8266 Arduino core works with SD cards, servos, SPI and I2C peripherals. -
16
xBridge - I2C/SMBus GUI
USB Bridge for SMBus/I2C, GPIO, & Clock
[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple testing and develop user-specific graphical interface products. ... -
17
jfModbusServer
Modbus server designed for Raspberry PI to control GPIO/I2C devices.
jfModbusServer is a Modbus Server for the Raspberry PI 2/3. Remotely access GPIO pins and read/write I2C devices. Requires Java. -
18
ESP32 Dew Controller
ESP32 4-channel dew controller.
This is an enhanced 4-Channel automated Dew Controller based on an ESP32 WiFi chip on a PCB and enclosed in a project hobby box. (c) Copyright Robert Brown 2020-2024. All Rights Reserved.Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. EXPANSION BOARDS - You can expand this project using the two types of project expansion boards at https://sourceforge.net/projects/myesp-boards/ -
19
eCScope
Oscilloscope like software for measure data with INA260 chips
Freeware software for Raspberry PI 4B+ using GPIO and I2C connections with a hardware board with a 30 cm I2C cable (seed or qwicc) or 2m (proprietary eComet). Hardware will be available soon at http://electromaker.io. main features: max 150s measurement time, load measurement data to CSV file, measurement calibration, parallel measurement of 4 values, scale zoom in out, and move at X and Y axes For news and updates see twitter page. -
20
FabGL
ESP32 Display Controller (VGA, PAL/NTSC Color Composite, SSD1306, ST77
FabGL is mainly a Graphics Library for ESP32. It implements several display drivers (VGA output, PAL/NTSC Color Composite, I2C and SPI displays). FabGL can also get input from a PS/2 Keyboard and a Mouse. FabGL implements also: an Audio Engine (DAC and Sigma-Delta), a Graphical User Interface (GUI), a Game Engine and an ANSI/VT Terminal. VGA output requires an external digital-to-analog converter (DAC): it can be done by three 270 Ohm resistors to have 8 colors, or by 6 resistors to have 64 colors. ... -
21
PJON
Experimental, arduino-compatible, multi-master, multi-media network
...PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP, TCP, MQTT and ESPNOW. PJON is an experimental network protocol stack crafted in 10 years of research and experimentation. It was originally developed as an open-source alternative to i2c and 1-Wire but during development, its scope and features have been extended to cover use cases where IP is generally applied. PJON has been engineered to have a variable footprint (4.2-8.2 kB program memory) and overhead (5-35 bytes per packet) depending on its configuration. -
22
raspberry-gpio-python
A Python module to control the GPIO on a Raspberry Pi
...If you are after true real-time performance and predictability, buy yourself an Arduino! (see http://www.arduino.cc ) Note that the current release does not support SPI, I2C, 1-wire or serial functionality on the RPi yet. This is planned for the near future - watch this space! -
23
xSMBus - Java I2C/SMBus API
USB Bridge for SMBus(I2C), GPIO, and Clock, Java API
...The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus all devices Interactive - enter interactive mode File - You can use the executable script to attach files Reset - restart xBridge-M01 You may refer to xBridge that is based on this API https://xbridge-m01.doidx.com You can buy the product from: - China, https://shop255163877.taobao.com - Taiwan, you can buy on https://www.ruten.com.tw/user/index00.php?... -
24
The libbuspirate is a C library to talk with the bus pirate hardware (http://dangerousprototypes.com/docs/Bus_Pirate) in raw, binary scripting mode. The libbuspirate allows to quickly write a short C program to test interfacing with your favorite hardware. The library has mainly be used to interface through SPI with RF transceivers such as CC2500, MRF24J40, Ethernet controller such as ENC28J60, EEPROMs such as 24C02, 24FC1025, LCD display (PCD8544 / Nokia5110), LED display (HT1632), ......
-
25
I2C-sniffer
This code catches I2C communication by running on an ESP32 board that are connected to I2C BUS lines as a passive listener.
