Showing 27 open source projects for "hardware"

View related business solutions
  • Earn up to 16% annual interest with Nexo. Icon
    Earn up to 16% annual interest with Nexo.

    Access competitive interest rates on your digital assets.

    Generate interest, borrow against your crypto, and trade a range of cryptocurrencies — all in one platform. Geographic restrictions, eligibility, and terms apply.
    Get started with Nexo.
  • Cut Data Warehouse Costs by 54% Icon
    Cut Data Warehouse Costs by 54%

    Easily migrate from Snowflake, Redshift, or Databricks with free tools.

    BigQuery delivers 54% lower TCO with exabyte scale and flexible pricing. Free migration tools handle the SQL translation automatically.
    Start Free
  • 1
    ExpressLRS Configurator

    ExpressLRS Configurator

    Cross platform configuration & build tool for the ExpressLRS radio

    ExpressLRS Configurator is a free, open-source, cross-platform application for configuring and building firmware for the ExpressLRS radio control system. It provides a graphical interface that simplifies preparing firmware for compatible radio transmitters and receivers. Users can select their hardware targets, choose firmware versions, and customize configuration settings before building firmware. The application supports device-specific options, including regulatory domains, binding phrases, and network settings. It helps streamline firmware installation and updates across supported ExpressLRS hardware. By organizing configuration and build processes into a single interface, it reduces the need for manual development tools and complex commands. ...
    Downloads: 11 This Week
    Last Update:
    See Project
  • 2
    ArduPilot

    ArduPilot

    ArduPlane, ArduCopter, ArduRover, ArduSub source

    ...MAVLink telemetry connects vehicles with ground stations and companion computers for configuration, monitoring, and mission control. Extensive logging, sensor integration, camera control, scripting, and hardware support make it suitable for hobby, research, and commercial robotics.
    Downloads: 34 This Week
    Last Update:
    See Project
  • 3
    ESP-Drone

    ESP-Drone

    Mini Drone/Quadcopter Firmware for ESP32 and ESP32-S Series SoCs

    ESP-Drone is an open-source quadcopter platform built around Espressif ESP32, ESP32-S2, and ESP32-S3 microcontrollers. It combines lightweight hardware with firmware derived in part from the Crazyflie project. Pilots can control the drone through a mobile application or compatible gamepad over wireless connections. Stabilize mode provides basic assisted flight, while additional hardware enables height-hold and position-hold modes. The project supports the Crazyflie client ecosystem and ESP-BOX3 joystick control through ESP-NOW. ...
    Downloads: 12 This Week
    Last Update:
    See Project
  • 4
    QGroundControl

    QGroundControl

    Cross-platform ground control station for drones

    QGroundControl is a cross-platform ground control station for MAVLink-enabled drones and autonomous vehicles. It provides full setup, configuration, flight control, and mission planning for platforms including PX4 and ArduPilot. Mission tools can create waypoint, survey, and structure-scan routes. The live flight view combines maps, instruments, vehicle position, telemetry, and optional video streams. Guided setup tools cover sensors, radios, flight modes, power systems, and vehicle...
    Downloads: 46 This Week
    Last Update:
    See Project
  • Paessler: Easy to Use With Enterprise Power. Free Trial Icon
    Paessler: Easy to Use With Enterprise Power. Free Trial

    A low-code dashboard makes monitoring intuitive for any admin, while scripting and custom sensors give experts full control.

    You shouldn't have to choose between a monitoring tool that's easy to use and one that's powerful enough for a complex environment. PRTG's low-code interface lets any admin build dashboards, set alerts and monitor devices without scripting, while custom sensors and full API access are there when your team needs deeper control. One platform, no compromise. Download a free 30-day trial now.
    Get Free Download
  • 5
    Betaflight App

    Betaflight App

    Cross platform configuration and management application

    Betaflight App is a free, open-source configuration and management application for flight controllers running Betaflight firmware. It provides a graphical environment for configuring drones and other supported aircraft without manually editing firmware settings. Users can adjust flight characteristics, receiver inputs, motor configurations, and onboard system parameters. The application includes tools for tuning PID controllers, configuring flight modes, and adjusting filtering settings. It...
    Downloads: 35 This Week
    Last Update:
    See Project
  • 6
    ExpressLRS

    ExpressLRS

    High Performance Open Source Radio Control Link

    ExpressLRS is an open-source radio-control link system designed for low latency, long range, and high update rates. It supports 2.4 GHz, 900 MHz, and dual-band radio hardware from many manufacturers. Packet rates can reach up to 1000 Hz on supported configurations. Receivers can expose protocols including CRSF, SBUS, SUMD, HoTT telemetry, MAVLink, and PWM. Firmware updates can be delivered over Wi-Fi, while Bluetooth or Wi-Fi modes can emulate a simulator joystick. Bind phrases simplify pairing without requiring physical bind-button procedures. ...
    Downloads: 11 This Week
    Last Update:
    See Project
  • 7
    Flix

    Flix

    Making an ESP32-based quadcopter from scratch

    ...A wireless command-line interface supports configuration and analysis without a wired connection. The project also includes a Gazebo simulator that runs the original flight code and a Python library for scripted or automatic flights. Hardware files, assembly instructions, troubleshooting guides, and flight-control documentation make it suitable for hands-on learning.
    Downloads: 5 This Week
    Last Update:
    See Project
  • 8
    Mission Planner

    Mission Planner

    Mission Planner Ground Control Station for ArduPilot

    Mission Planner is a ground control station for configuring, monitoring, and operating vehicles powered by the ArduPilot autopilot system. It supports multirotor aircraft, fixed-wing planes, and autonomous ground vehicles. Users can install firmware, calibrate sensors, adjust parameters, and configure flight modes through a graphical interface. Its mission editor creates autonomous routes using map-based waypoints, geofences, and rally points. Survey planning tools generate flight paths for...
    Downloads: 12 This Week
    Last Update:
    See Project
  • 9
    ODM

    ODM

    A command line toolkit to generate maps, point clouds, 3D models

    OpenDroneMap ODM is a command-line photogrammetry toolkit for converting aerial imagery into geospatial and 3D products. It can process photographs captured by drones, balloons, kites, and other aerial platforms. Outputs include classified point clouds, textured 3D models, georeferenced orthophotos, and digital elevation models. The processing pipeline integrates specialized open-source projects for reconstruction, meshing, geospatial conversion, and point-cloud processing. ODM runs on...
    Downloads: 5 This Week
    Last Update:
    See Project
  • Our Free Plans just got better! | Auth0 Icon
    Our Free Plans just got better! | Auth0

    With up to 25k MAUs and unlimited Okta connections, our Free Plan lets you focus on what you do best—building great apps.

    You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
    Try free now
  • 10
    dRehmFlight

    dRehmFlight

    Teensy/Arduino flight controller & stabilization for small-scale VTOL

    ...It emphasizes readable, centralized code instead of a large framework spread across many files and classes. The project is designed to teach aircraft stabilization and flight-control concepts while remaining easy to modify. Its primary hardware platform uses a Teensy 4.0 microcontroller and an MPU6050 six-axis IMU. Features include receiver input handling, IMU calibration, ESC calibration, motor arming, and customizable control logic. Because the code is easy to edit in the Arduino ecosystem, experimental aircraft behaviors can be added quickly. The project is intended mainly for education and rapid prototyping rather than commercial flight-control deployment.
    Downloads: 1 This Week
    Last Update:
    See Project
  • 11
    PilottAI

    PilottAI

    Python framework for building scalable multi-agent systems

    pilottai is an AI-based autonomous drone navigation system utilizing reinforcement learning for real-time decision-making. It is designed for simulating and training drones to fly safely through dynamic environments using AI-based controllers.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 12
    DroneBridge for ESP32

    DroneBridge for ESP32

    Secure & transparent telemetry link with support for WiFi and ESP-NOW

    DroneBridge for ESP32 is lightweight firmware that turns inexpensive ESP32 boards into wireless telemetry links for drones and other vehicles. It bridges serial data to standard Wi-Fi, Wi-Fi Long Range, ESP-NOW, or Bluetooth Low Energy. MAVLink, MSP, LTM, and arbitrary serial payloads can be transported through the system. Standard Wi-Fi can reach roughly 150 meters, while compatible ESP-NOW or long-range Wi-Fi setups can extend much farther. Traffic can be encrypted with AES-256-GCM,...
    Downloads: 3 This Week
    Last Update:
    See Project
  • 13
    dRonin

    dRonin

    The dRonin flight controller software

    dRonin is an open-source autopilot and flight-controller firmware for hardware derived from the OpenPilot and Tau Labs ecosystems. It is designed for acrobatic flying, racing, autonomous flight, and vehicle research. The project supports a broad range of flight-control boards, including OpenPilot Revolution, BrainFPV, Sparky, Quanton, and several racing-oriented controllers. Its architecture combines embedded flight firmware with supporting ground-control and configuration software. ...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 14
    CarlaAir

    CarlaAir

    Fly Drones Inside a CARLA World

    CarlaAir is an open-source robotics simulator that combines CARLA urban driving with multirotor drone flight inside one Unreal Engine environment. It is designed for research involving coordinated aerial and ground autonomous systems. Vehicles, pedestrians, drones, weather, and sensor streams can coexist within the same simulated world. Users can access both CARLA and AirSim-style Python APIs to control different agents and environments. The platform supports synchronized cameras, lidar,...
    Downloads: 1 This Week
    Last Update:
    See Project
  • 15
    OPEN DRONELOG

    OPEN DRONELOG

    High-performance universal dashboard application for organizing

    OPEN DRONELOG is a local-first application for importing, organizing, and analyzing drone flight logs. It supports DJI flight logs, Litchi CSV files, Airdata exports, and optional custom parser plugins. DuckDB powers large-scale telemetry analysis with automatic downsampling for responsive charts. Interactive maps provide 3D flight paths, terrain views, replay controls, joystick visualization, and synchronized telemetry. The application tracks batteries, maintenance, tags, media captures,...
    Downloads: 1 This Week
    Last Update:
    See Project
  • 16
    FASTER

    FASTER

    3D Trajectory Planner in Unknown Environments

    FASTER is a research-grade 3D trajectory planner for autonomous navigation in unknown environments. It was developed for both aerial robots and ground vehicles that must move safely while new obstacles are discovered. The planner continuously builds safe and unknown-space trajectory segments rather than assuming the environment is fully mapped. Optimization is used to generate dynamically feasible paths while maintaining safety constraints. The project integrates with ROS, Gazebo, MAVROS,...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 17
    OpenReco

    OpenReco

    Open-source photogrammetry for 3D reconstruction.

    OpenReco is an open-source photogrammetry and reality-capture platform designed to turn photographs into accurate 3D models, dense point clouds, textured meshes, DEMs, and orthomosaics. Built for researchers, drone operators, surveyors, developers, hobbyists, and digital artists, OpenReco aims to provide a transparent and extensible alternative to proprietary photogrammetry software. The project focuses on ease of use, performance, and reproducible workflows while embracing the...
    Downloads: 2 This Week
    Last Update:
    See Project
  • 18
    OpenMVG

    OpenMVG

    open Multiple View Geometry library. Basis for 3D computer vision

    openMVG is an open-source C++ library for multiple-view geometry, photogrammetry, and Structure from Motion. It provides an end-to-end framework for reconstructing 3D scenes from collections of ordinary images. Its libraries cover image handling, feature description, feature matching, feature tracking, camera models, triangulation, robust estimation, and geometric solvers. Command-line binaries handle individual reconstruction stages that can be combined into complete pipelines....
    Downloads: 1 This Week
    Last Update:
    See Project
  • 19
    Flask RESTful Example

    Flask RESTful Example

    Flask backend development interface example, using Flask

    Flask RESTful Example is a practical Python backend reference showing how to build production-style APIs with Flask. It covers application configuration, standardized responses, logging, database access, authentication, background tasks, and deployment. MySQL and Redis examples demonstrate relational storage and caching workflows. Authentication examples include JWT, mobile verification codes, and WeChat-based login scenarios. Reporting modules generate Excel, Word, PDF, and hierarchical...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 20
    DroneSploit

    DroneSploit

    Drone pentesting framework console

    DroneSploit is a Python command-line framework for authorized security testing of drones and related wireless systems. Its interface is modeled after Metasploit to provide a familiar module-oriented workflow for security researchers. The framework gathers drone-specific assessment techniques and security modules in one console. Individual modules activate only when their required external tools and dependencies are available. Its architecture is built on the SploitKit framework and can be...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 21
    gym-pybullet-drones

    gym-pybullet-drones

    PyBullet Gymnasium environments for multi-agent reinforcement

    Gym-PyBullet-Drones is an open-source Gym-compatible environment for training and evaluating reinforcement learning agents on drone control and swarm robotics tasks. It leverages the PyBullet physics engine to simulate quadrotors and provides a platform for studying control, navigation, and coordination of single and multiple drones in 3D space.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 22
    GAAS

    GAAS

    GAAS is an open-source program designed for fully autonomous VTOL

    GAAS, or Generalized Autonomy Aviation System, is an open-source autonomy framework for drones, VTOL aircraft, and experimental flying-car research. It focuses on robust autonomous navigation using lidar rather than relying primarily on vision. The system includes mapping, HD-map localization, path planning, obstacle handling, and aircraft-control modules. Localization components include NDT and ICP approaches, with GPU acceleration available for selected algorithms. Simulation support...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 23
    Advanced Drone system

    Advanced Drone system

    Advanced Drone System

    This project intends to modelize a framework for remote controlled airplanes. This framework includes PPM/PCM drivers and data telemetry (location, speed, altitude) based on the SensorsAPI, to provide a reliable augmented reality for FPV flights
    4.0 out of 5 stars 1 Review
    Downloads: 0 This Week
    Last Update:
    See Project
  • 24
    ZuppaGCS V 1.5.4 Alpha

    ZuppaGCS V 1.5.4 Alpha

    Fully Functional GCS(Ground Control System) for Zuppa Autopilot

    This is Fully Functional Ground Control Station Designed for the Zuppa Autopilot , Zuppa FLAME (Farm and Large Area Mapping Solution) and the Zuppa DUSTER (Pesticide Spraying Drone). It has data analyzer tools as well as playback and post flight analysis features. It is compatible for a typical Window Laptop or Windows tab (8" and above) . It has Both offline and online map operation modes , additionally you can also download maps using the ZUPPA GCS software. Very Ergonomically...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 25
    ar-drone

    ar-drone

    A node.js client for controlling Parrot AR Drone 2.0 quad-copters

    ar-drone is a Node.js client library for controlling Parrot AR.Drone quadcopters over their network protocol. It provides a high-level API for common flight operations such as takeoff, landing, altitude changes, rotation, directional movement, and hovering. Programs can receive navigation telemetry including flight state, altitude, and other sensor data. Camera output can be accessed as raw video streams or converted into PNG frames through FFmpeg. The library also exposes predefined flight...
    Downloads: 2 This Week
    Last Update:
    See Project
  • Previous
  • You're on page 1
  • 2
  • Next