Search Results for "pid controller"

Marlin is a popular open source firmware for the RepRap family of 3D printers. It is straightforward, reliable, extensible and adaptable, which is why it is used by many respected commercial 3D printer vendors as well as hobbyists. It runs on inexpensive 8-bit Atmel AVR micro-controllers, with added support for 32-bit and ARM-based boards. Marlin builds can be small enough for use on a headless printer with only modest hardware, and features can be enabled as-needed.

ScriptCommunicator is a scriptable cross-platform data terminal that supports serial port (RS232, USB to serial), UDP, TCP client/server, SPI, I2C, and CAN. All sent and received data can be shown in a console and can be logged in an html and a text log. In addition to the simple sending and receiving of data, ScriptCommunicator has a JavaScript interface. This script interface has the following features: - Scripts can send and receive data with the main interface. - In addition to...

This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. ...

The code in this repository is old and I don't like the sourceforge interface. You can get the code that was running in the video here: https://github.com/arduinoNube/digital-pid-classroom-demo This was a class demonstration I developed for a mechatronics class. Feel free to contact me about getting design files, code, a little help, etc. It demonstrates proportional, integral, and derivative controllers and their features as well as anti-windup and control loop update rate. It uses...

MashBerry is a Raspberry PI based beer-brewing controller. It is designed to automate the mashing-process for the homebrewer. MashBerry can be operated via a Web-interface or via a Display and an IR-remote. The temperature is controlled using a PID-controller, the temperature-measurement is done with a PT1000 or a Dallas 18B20. For power-control an external Solid-State-Relay is used.

This low cost project is a RC servo like position control of one or two geared motor(s) with a pot as angle feedback. You can send the arduino microcontroller a value from 0 to 1023 and the arduino will control the motor speed and direction to reach your target value. The PID algorithm will insure that the motor will not get into hold vibrations if the pot has some influences. This article will describe where you have to take attentions and what you have to setup to get the best results. The project will help you to connect any arduino motor shield or other H-Bridges to the controller because it is open source and the output pins can therefor be changed as you like. ...