Search Results for "g code"
Sort By:
Showing 160 open source projects for "g code"
View related business solutions-
Boost application security and continuity with SKUDONET ADC, our Open Source Load Balancer, that maximizes IT infrastructure flexibility. Additionally, save up to $470 K per incident with AI and SKUDONET solutions, further enhancing your organization’s risk management and cost-efficiency strategies.
-
Chat with your business data with Looker. More than just a modern business intelligence platform, you can turn to Looker for self-service or governed BI, build your own custom applications with trusted metrics, or even bring Looker modeling to your existing BI environment.
-
1
Universal G-Code Sender
A cross-platform G-Code sender for GRBL, Smoothieware, etc.
A full-featured gcode platform used for interfacing with advanced CNC controllers like GRBL , TinyG, g2core and Smoothieware. Universal Gcode Sender is a self-contained Java application that includes all external dependencies and can be used on most computers running Windows, MacOSX or Linux. With older versions of GRBL UGS is pretty reliable when it comes to jogging, but there are limitations. With GRBL 1.1 this is no longer the case when using the new JOG MODE syntax. This first-class jog... -
2
G-Code Transformation Utility
Transformation utility to rotate coordinates in G-Code files
... reference point, travel CNC with a laser module and fine tune X/Y coordinates to target at the center of a drilled point (laser light will dim out). Write each of the measured point's coordinate with corresponding ideal (original) point coordinate into the reference point (text) file. Then use this utility with source G-Code file & measured reference file to perform transformation into a destination G-Code file. Each X/Y coordinate in "G0", "G00", "G01" commands will be rotated by a calculated angle. -
3
Marlin
Optimized firmware for RepRap 3D printers based on Arduino platform
Marlin is a popular open source firmware for the RepRap family of 3D printers. It is straightforward, reliable, extensible and adaptable, which is why it is used by many respected commercial 3D printer vendors as well as hobbyists. It runs on inexpensive 8-bit Atmel AVR micro-controllers, with added support for 32-bit and ARM-based boards. Marlin builds can be small enough for use on a headless printer with only modest hardware, and features can be enabled as-needed. -
4
Openwifi
open-source IEEE 802.11 WiFi baseband FPGA (chip) design
Linux mac80211 compatible full-stack IEEE802.11/Wi-Fi design based on SDR (Software Defined Radio). -
We design our technology to make workforce management easier. APS offers core HR, payroll, benefits administration, attendance, recruiting, employee onboarding, and more.
-
5
Fantomas
FSharp source code formatter
F# source code formatter, inspired by scalariform for Scala, ocp-indent for OCaml and PythonTidy for Python. This project aims at formatting F# source files based on a given configuration. Fantomas will ensure correct indentation and consistent spacing between elements in the source files. We assume that the source files are parsable by F# compiler before feeding into the tool. Fantomas follows two F# style guides: the F# code formatting guidelines from Microsoft by default and the G-Research F... -
6
RuboCop Rails
A RuboCop extension focused on enforcing Rails best practices
A RuboCop extension focused on enforcing Rails best practices and coding conventions. It’s based on the community-driven Rails style guide. You need to tell RuboCop to load the Rails extension. Now you can run rubocop and it will automatically load the RuboCop Rails cops together with the standard cops. If you are using Rails 6.1 or newer, add the following config.generators.after_generate setting to your config/application.rb to apply RuboCop autocorrection to code generated by bin/rails g... -
7
CPT
CPT: A Pre-Trained Unbalanced Transformer
A Pre-Trained Unbalanced Transformer for Both Chinese Language Understanding and Generation. We replace the old BERT vocabulary with a larger one of size 51271 built from the training data, in which we 1) add missing 6800+ Chinese characters (most of them are traditional Chinese characters); 2) remove redundant tokens (e.g. Chinese character tokens with ## prefix); 3) add some English tokens to reduce OOV. Position Embeddings We extend the max_position_embeddings from 512 to 1024. We... -
8
eslint-plugin-jsx-a11y
Static AST checker for a11y rules on JSX elements
Static AST checker for accessibility rules on JSX elements. This plugin does a static evaluation of the JSX to spot accessibility issues in React apps. Because it only catches errors in static code, use it in combination with axe-core/react to test the accessibility of the rendered DOM. Consider these tools just as one step of a larger a11y testing process and always test your apps with assistive technology. If you installed ESLint globally (using the -g flag in npm, or the global prefix... -
9
asap
A modern cmake starter project for C++ with a complete build lifecycle
A modern cmake starter project for C++ with a complete build lifecycle, testing, dependency management, etc. Portable across Linux, OS X and Windows. Have you ever found yourself spending countless hours trying to figure out how to start a professional C++ project with unit tests, a robust dev workflow, change logs, code coverage, linting, formatting...? The C++ ecosystem is getting better but is still very far away from other ecosystems such as JavaScript, or even Rust. It's certainly easy... -
Our robust pre-built connectors and our no-code, drag-and-drop interface makes it easy and fast to automatically sync vendors, invoices, and invoice payment data between Tipalti and your ERP or accounting software.
-
10
SFSafe Symbols
Safely access Apple's SF Symbols using static typing
At WWDC 2019, Apple announced a new library of icons that came included with that year's new operating system versions. To browse them, there's a dedicated Mac app called SF Symbols. You can be sure your symbol code won't crash due to typos or symbol availability issues. This is because all symbols are tested via a CI (on the latest iOS & tvOS versions and also some earlier OS versions). Lookups in the SF Symbols app (e. g. about available layersets, available localizations & the look... -
11
Jittor
Jittor is a high-performance deep learning framework
Jittor is a high-performance deep learning framework based on JIT compiling and meta-operators. The whole framework and meta-operators are compiled just in time. A powerful op compiler and tuner are integrated into Jittor. It allowed us to generate high-performance code specialized for your model. Jittor also contains a wealth of high-performance model libraries, including image recognition, detection, segmentation, generation, differentiable rendering, geometric learning, reinforcement... -
12
Wretch
A tiny wrapper built around fetch with an intuitive syntax
A tiny (~ 3Kb g-zipped) wrapper built around fetch with an intuitive syntax. Wretch is compatible with modern browsers out of the box. For older environments without fetch support, you should get a polyfill. Converts a javascript object to query parameters, then appends this query string to the current url. String values are used as the query string verbatim. Only compatible with browsers that support AbortControllers. Otherwise, you could use a (partial) polyfill. Associates a custom... -
13
webpack-dashboard
A CLI dashboard for webpack dev server
A CLI dashboard for your webpack dev server. You can alternatively globally install the dashboard (e.g. npm install -g webpack-dashboard) for use with any project and everything should work the same. When choosing a custom port, you need to find one that is not already in use. You should not choose one that is being used by webpack-dev-server / devServer or any other process. Instead, pick one that is only for webpack-dashboard and pair that up in the plugin configuration and CLI port flag... -
14
Refined GitHub
Browser extension that simplifies GitHub interface and adds features
... shortcut to star/unstar the current repo: g s. Adds a link to the default branch on directory listings and files. Adds a link to swap branches in the branch compare view. Adds a shortcut to your forks next to the Fork button on the current repo. Displays the age of the repository in the sidebar. In your forked repos, shows number of your open PRs to the original repo. Adds a link to access the past runs of a GitHub Action workflow when seeing the workflow configuration file. And much more. -
15
G-CPS
Lite CPS Tester
G-CPS (Golden CPS) It is a Very Lite program to measure your CPS G-CPS is a very lightweight program, it contains multiple color themes, and several options to adjust the test time (1, 3, 5, 10, 15, 30 and 60) s. It also saves the CPS record that you have achieved, each time mode has a different record. Source Code: GitHub: https://github.com/PETEROLO291/G-CPS You can try it out with: https://sourceforge.net/projects/flame-auto-clicker/ Info: Installer: 9.3MB Program: 27.5MB Version... -
16
Entity-To-Code
Mathematical Functions in an NPM library made with JS and C++
NPM URL: https://www.npmjs.com/package/entitytocode Source Forge: https://entity-to-code.sourceforge.io WIKI Git: https://github.com/BSW-G-D-iph6/Entity-To-Code/wiki -
17
Candle
GRBL controller application with G-Code visualizer written in Qt
GRBL controller application with G-Code visualizer written in Qt. -
18
G-Code Syntaxhighlighter for NetBeans
NetBeans Module for Syntaxhighlighting of G-Code (CNC).
NetBeans Module for Syntaxhighlighting of G-Code (CNC). -
19
dxf2gcode
DXF2GCODE: converting 2D dxf drawings to CNC machine compatible G-Code
DXF2GCODE is a tool for converting 2D (dxf, pdf, ps) drawings to CNC machine compatible GCode. Windows, Linux, and Mac support by using python scripting language. -
20
Denise
C64/Amiga emulator with PAL shader and runAhead
Denise is a cycle accurate and platform independant C64 / Amiga emulator. My motivation for this project is understanding how it works and write clean and easy readable code. Denise now emulates an Amiga 500 and Amiga 1000. Features already known from the C64 emulation, such as runAhead, savestates, drive sounds, PAL encoding, dynamic rate control, G-Sync/FreeSync, Warp, just in time polling are also available for the Amiga. Denise supports REU, GeoRam, EasyFlash, EasyFlash³, Gmod2, Retro... -
21
Chess Engines for Android
Chess engines that support the UCI or XBoard protocol.
... information (e. g. link to the source code). Chess engines are located in the libs directory and are available for arm64-v8.2a-dotprod, arm64-v8a, armeabi-v7a, x86 and x86_64 based devices. If a chess engine supports NNUE (Neural Network Updated Efficiently) technology and the network is not embedded in the binary, you will find the missing network file in the networks directory. Requires a chess app that has full access to the internal memory (e.g. Chess for Android 6.2.1 or DroidFish). -
22
Burny1250 terminal
Program for transferring G-code to Burny 1250 or Burny 1250+
The program is designed to transfer the G-code to the controller of the Burny1250 plasma cutting machines. If there is a postprocessor for a modern cam program, then it is necessary to resolve the issue only with the transfer data to the controller Burny1250. The program may be needed for machines: B & W SYSTEMS CNC Plasma Cutter (BWPC01) LOCKFORMER Vulcan NT 2000 Aviator XLT Innerlogic Proline 2200 Precision Plasma Cutter Innerlogic SR-45i CNC plasma C&G Aviator XL CNC plasma cutter FLAMETEK... -
23
Chess Tools for Android
Scripts and tools for Android.
Open source scripts and tools for Android. Every zip archive contains a readme file with further information (e. g. link to the source code). Chess tools are located in the libs directory and are available for arm64-v8a, armeabi-v7a, x86 and x86_64 based devices. CECSA (Chess Engine Compiler Script for Android) and CETSA (Chess Engine Tournament Script for Android) are scripts for Termux. They need to be extracted in the home directory of Termux. There is also an installation script for CECSA... -
24
DocSync
It is a tool that accepts Google Docs Links and checks any changes
Given sender e-mail and password (used to help access the Google Doc), recipient email and password (helps send the e-mail), and docs link, this product will allow you to receive updates based on changes done on the document. Source code is posted in the GitHub! Note that the program is only for Windows platforms. More platforms coming soon! GitHub: https://github.com/joalen/DocSync/ -
25
TRURL
A suite of RPN calculators and a class library for Object Pascal
... Engine • TRURL G: Desktop RPN calculator inspired by the UI of the DSKY unit of the Apollo Guidance Computer (AGC)