Re: [OpenOCD-user] LPC43XX - need help w lpcspifi.c failure, on 2nd and later ...

[Jones, J. <jam...@te...>]

Regarding my request for help-  never-mind, it was PILOT ERROR -- the problem was caused by me, when I moved the boot-pin jumper from USB-boot _after_ the first successful operation of "flash write_image",  to SPIFI-boot selection.

Apparently OpenOCD cannot program SPIFI devices while the factory ROM at 0x1040 0000 is actively mapping that region down to 0x0000.

DOH !!  That is why subsequent attempts to run "flash write_image" failed.

I moved the jumper back to map USB to the boot-region, and I am up and running, although with less hair.

Thanks  to all for an amazing tool.

Jim