From: Xiaofan C. <xia...@gm...> - 2009-07-31 14:49:50
|
On Fri, Jul 31, 2009 at 7:56 PM, Xiaofan Chen<xia...@gm...> wrote: > On Fri, Jul 31, 2009 at 7:41 PM, Xiaofan Chen<xia...@gm...> wrote: >> On Thu, Jul 30, 2009 at 10:23 PM, Xiaofan Chen<xia...@gm...> wrote: >> I am also having problem with J-Link with the EK-LM3S1968. It >> is not able to flash the flash. I've tried V3 and V6 IAR OEM version of >> J-Link. Take note the on-board ftdi interface works fine with the same >> svn version 2570. >> > > Not really. It seems that some Ubuntu 9.04 updates yesterday messed up with > OpenOCD now. Actually it crashed now with ftdi interface. > So I went back to V0.2.0 release version and it works. mcuee@ubuntu904:~/Desktop/build/openocd/lm3s1968$ openocd -f interface/luminary.cfg -f lm3s1968.cfg Open On-Chip Debugger 0.2.0 (2009-07-31-20:09) Release $URL: http://svn.berlios.de/svnroot/repos/openocd/tags/openocd-0.2.0/src/openocd.c $ For bug reports, read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS 3000 kHz jtag_nsrst_delay: 100 jtag_ntrst_delay: 100 Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG Tap/device matched Info : accepting 'telnet' connection from 0 Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG Tap/device matched target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x00000470 auto erase enabled Info : Algorithm flash write 1710 words to 0x0, 1710 remaining wrote 6840 byte from file ./StellarisWare/boards/ek-lm3s1968/graphics/gcc/graphics.bin in 1.160855s (5.754110 kb/s) Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG Tap/device matched mcuee@ubuntu904:~/Desktop/build/openocd/lm3s1968$ telnet localhost 4444 Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Open On-Chip Debugger > init > reset halt JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) JTAG Tap/device matched target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x01000000 pc: 0x00000470 > flash write_image erase ./StellarisWare/boards/ek-lm3s1968/graphics/gcc/graphics.bin auto erase enabled Algorithm flash write 1710 words to 0x0, 1710 remaining wrote 6840 byte from file ./StellarisWare/boards/ek-lm3s1968/graphics/gcc/graphics.bin in 1.160855s (5.754110 kb/s) > reset run JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) JTAG Tap/device matched -- Xiaofan http://mcuee.blogspot.com |