Activity for Todd
-
Todd created ticket #11
autostart: Cannot read file
-
I have no purchased the card yet. If it doe not work with Clonezilla, I will have to take a different approach.
-
Will this raid card work with clonezilla. I know most will not. https://www.highpoint-tech.com/product-page/ssd6202a Their web site states: HighPoint Industrial and Virtualization solutions feature integrated host, hardware-level RAID 0, 1 and JBOD capability. RAID arrays hosted by SSD6200 series controllers are fully transparent and will be automatically recognized by all current VM and OS platforms as available single-drives. No drivers, special procedures or software application is required.
-
Before dump/restore fixed the ftruncate and core dump errors, I checked out borg as a suitable replacement. Since I have to backup up a bunch of qemu-kvm virtual drive, which are sparse files, I picked out three to backup with borg. Originals: $ dd count=0 bs=1M seek=100 of=sparseFile $ du --bytes KVM-W10.raw KVM-W11.raw sparseFile 64_424_509_440 KVM-W10.raw 133_143_986_176 KVM-W11.raw 104_857_600 sparseFile $ du --block-size=1 KVM-W10.raw KVM-W11.raw sparseFile 48_891_629_568 KVM-W10.raw 51_850_604_544...
-
Before dump/restore fixed the ftruncate and core dump errors, I checked out borg as a suitable replacement. Since I have to backup up a bunch of qemu-kvm virtual drive, which are sparse files, I picked out three to backup with borg. Originals: $ dd count=0 bs=1M seek=100 of=sparseFile $ du --bytes KVM-W10.raw KVM-W11.raw sparseFile 64_424_509_440 KVM-W10.raw 133_143_986_176 KVM-W11.raw 104_857_600 sparseFile $ du --block-size=1 KVM-W10.raw KVM-W11.raw sparseFile 48_891_629_568 KVM-W10.raw 51_850_604_544...
-
It doesn't seem to be overwritten by dnf upgrade I just verified it myself. I also verified you have to remove to old one to upgrade to the one you posted.
-
Thank you!!! Will you be uploading the good ones to the Fedora repo's? Dnf update will overwrite the good ones otherwise
-
will you be uploading the good ones to the Fedora repo's? Dnf update will overwrite the good ones otherwise
-
I am confused. How do I get my hands on the good code?
-
The new rpm core dumps. See https://sourceforge.net/p/dump/bugs/185/ Bummer.
-
core dump
-
downstream just announced that he will be posting b52 in the repos shortly
-
downstream just announced that he will be posting b52 in the repos shortly
-
Is this warning just noise or is there something wrong?
-
Not having any luck building my own. I do believe the hold up is the spec file. To create an rpm from scratch using the b52 tar ball, what would your spec file look like?
-
RPM?
-
I am still seeing this on Fedora 41 and dump-0.4-0.57.b47.fc41.x86_64. Would you please re-open this bug report.
-
I am still seeing this on Fedora 41 and dump-0.4-0.57.b47.fc41.x86_64
-
wrong eMail client and double sided printing
-
Hi All, Had a Fedroa 30 (yes, that old) server go down. The drives are RAID1 : /dev/md126: Container : /dev/md/imsm0, member 0 Raid Level : raid1 I presume that is RSTe raid, but I am not sure. I want to clone one of the drives over to a single NVMe drive. I know that Clonezilla does not like raid drives. Is there a way to clone one of the drives anyway? Many thanks, -T
-
RFE: BEtterbird
-
Oh yes. It works perfectly. Love clonezilla, especially the rescue mode. You just do no have any idea what the progress is after the status line corrupts. (The progress bar works but is sticks and halts on bad sectors, so it loses it usefulness too,) In the my attachment above, clonezilla rescued a failing Intel SSD drive. Awesome stuff!
-
Hi Steven, This happens on all my customer's machines, without exception. An occasional full refresh on the elapsed time status line would correct this problem. -T
-
clonezilla-live-3.0.3.22-amd64.iso Would one of our intrepid heroes please fix the elapsed time status line. The attachment show what happens after a bit of time. At one point the line had "warning" written across it.
-
What gparted sees
-
dump restores a qcows (sparse) drive as a blank drive
-
Thank you!
-
On further investigation, it looks like it is a "Windows recovery environment" partition and I can just leave it where it is. # sfdisk /dev/sda -l Disk /dev/sda: 60 GiB, 64424509440 bytes, 125829120 sectors Disk model: QEMU HARDDISK Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: AA20003C-A3D4-40FD-AE52-C7BE154FCBBE Device Start End Sectors Size Type /dev/sda1 2048 206847...
-
Hi All, I am going to clone a Windows gpt mechanical drive to a smaller SSD drive. I am going into gparted and resizing the large partition (sda3, C:) so it will fit on the new ssd drive. Question: there is a tiny sda4 hanging out there, which is presume is the gpt partition tables. Do I also need to move sda4 to the end of sda3 or is it okay to just leave it at the end of the disk? Many thanks, -T
-
Hi All, I am going to clone a Windows gpt mechanical drive to a smaller SSD drive. I am going into gparted and resizing the large partition (sda3, C:) so it will fit on the new ssd drive. Question: there is a tiny sda4 hanging out there, which is presume is the gpt partition tables. Do I also need to move sda4 to the end of sda3 or is it okay to just leave it at the end of the disk? Many thanks, -T
-
Hi All, I am going to clone a Windows gpt mechanical drive to a smaller SSD drive. I am going into gparted and resizing the large partition (sda3) so it will fit on the new ssd drive. Question: there is a tiny sda4 hanging out there, which is presume is the gpt partition tables. Do I also need to move sda4 to the end of sda3 or is it okay to just leave it at the end of the disk? Many thanks, -T
-
Rats! Thank you for your patience.
-
Is the answer top secret?
-
I am cleaver as can be when it comes to repairing operating systems. What I need to get over is the DLLs and the registry. I can repair the rest. Often times customers DO NOT have their keys or their source code for software and a lot of times their software is mission critical and abandoned. So I really would like my question answered for future reference.
-
From my original post, did you see that I know how to use gparted? That is following the FAQ. The source drive was too (mechanically) corrupted for even Windows chkdsk to repair. Windows would not even boot without choking on bad sectors. (The guy should have called me a the first sign of trouble, but did not.) I tried gparted anyway and it choked on the drive and told me to run "chkdsk/ r" in Windows on the corrupted drive. I had to install fresh on the new drive. Customer was happy because I managed...
-
If I clone to a partition on a third hard drive first, the restore the partition to the new smaller drive, will that limitation be removed?
-
Where are the hardware requirements? Does it run Fedora?
-
1) does this take credit cards? 2) If yes A) is it PCI certified (letter on file)? B) does it work with chip readers terminals? 2) does this support digital signature pads? 3) Does this have lot tracing (aerospace parts, etc.)? 4) does this have electronic billing? Many thanks, -T
-
Will Clonezilla allow me to clone a 2TB NTFS (not encrypted) drive with 100 GB used to a smaller 1TB SSD drive? Or do I have to re-size the partitions first (gparted)?
-
Will Clonezilla allow me to clone a 1TB NTFS (not encrypted) drive with 100 GB used to a smaller SSD drive? Or do I have to re-size the partitions first (gparted)?
-
Hi All, Fedora 36 clonezilla-live-3.0.1.8-amd64.iso Can I clone to a HighPoint SSD7202 hardware RAID controller configured for RAID 1 from an NVMe RAID 1 volume? https://www.highpoint-tech.com/gen3-nvme-m2-bootable Many thanks, -T
-
Can a clone a RSTe RAID1 drive to another RSTe RAID 1 drive? How about cloning a RSTe RAID1 drive to single drive?
-
Clipboard not working with Windows 11
-
dump takes over 8 hours after a NTFS Flash drive removed from an running qemu-kvm w7 vm
-
Works perfectly with naps2-6.1.0-setup.exe
-
Hi Matteo, This error also occures with Windows 10-1803 Pro x64 and HP Office Jet Pro 9025 scanner. The cause is a little more obvious (paper jams, etc.). Both computers work perfectly with naps2-6.1.0-setup.exe Please fix this! As it stands, I can no longer install iCopy on my customer's computers. Rats!
-
1.6.5 extremely slow to start with network scanners
-
Odd. It will ADF one page just fine, but not three. I will experiment with properties to see if I can figure out which one is doing it. Since this is very important to my customer and the Espon scanner interface is a nightmare, if I can not get iCopy working, do you have a favorite alternative?
-
Awesome. Thank you!
-
Rev on web page wrong
-
Problem reprodued on both iCopy 1.6.3 and 1.6.5
-
iCopy Settings
-
iCopy Log
-
Exception from HRESULT: 0x80210001
-
Hi Arthur, Sorry for the late response. I was never emailed when you rsponded. The link you send me was for a "M2 SATA ". I need NVMe. Whole difference animal. Thank you anyway. -T
-
Can not access Lenovo TAB 2 A10-70
-
I just updated to 1117 as you requested. Where are my contacts! Not so much an emergency,...
-
Contacts missing in 1117
-
RFE: add columns in the Contracts tab
-
anything to test?
-
Hi Henrik, I am using a Kangugu Flash Blu III 8 GB stick. https://kanguru.com/storage-accessories/flash-blu30.shtml...
-
Need a Windows 10 boot
-
Hi Max, "make disk" works in 1112, but... rpmbuild -bb osmo.spec gcc -DHAVE_CONFIG_H...
-
Hi Max, I went to compile the lastest SVN (02/23/2017, revision 1111). I got the...
-
Anything new to test?
-
Apparently, under Scientific Linxu 7.2 (RHEL 7.2 clone), the error log is called...
-
I have an /var/log/Xorg.0.log, if you would like it
-
$ ls -l ./.xsession-errors -rwxr-xr-x. 1 todd users 0 Aug 23 2015 ./.xsession-errors...
-
This is what appears in a command window. It says "NOT SANDBOXED" until I right click...
-
Hi Max, I still have to exit and restart Osmo to get "done" to take. :-( -T
-
Hi Max, I just compiled it up and created an RPM. Now we wait and see! Thank you...
-
Any movement on this?
-
Cobian Backup can not file drive
-
Intel sent me the following: http://www.intel.com/content/www/us/en/support/boar...
-
I see a #98 in the FAQ with this title, but it does not apply. I see the raid pair...
-
I see a #98 in the FAQ wth this title, but it does not apply. I see the raid pair...
-
Hi All, I have a customer with Windows 8 Pro, and C236 motherboard (Supermicro X11SAE-M),...
-
Recompiled it. Now I am noticing that if I hit remind me later too many times, I...
-
Thank you. Just got a chance to recompile it. Now we wait and see!
-
Hi Maxim, Even with last weeks SVN, "done" still isn't "done". I have to exit and...
-
Today's svn works perfectly. Thank you! Any idea when the next release will be?
-
I closed it myself. Gve me a fe days to rerun my svn and I will get back.
-
Hi Max, I have always had that checked. Double checking, it stil is. When I start...
-
RFE: remember tab
-
Anyone know where I can donload the srouce code?
-
Did you ever come up with a solution for this?
-
One of your green down arrows for adding an extra line on the address line would...
-
Will we be seeing this soon? I have a lot of customer with both physical addresses...
-
Hi Max, I haven't had a chance yet. Is there directions out there some where on how...
-
Hi All, Osmo 0.2.14 xfce4-4.10.0-12.el7.x86_64 Scientific Linux 7.1, x64 https://sourceforge.net/p/osmo-pim/bugs/90/...
-
got some clues that might help: Today is Tuesday. On boot up this morning I got three...
-
Got promptyed to take the trash out on Wednesday (the right day), Thursday, Friday,...
-
Hi Maxim, 0.2.14. Done still is not done. I have check done on my Heath Instarance...
-
RFE: display if one one found
-
The plot thicklens: $ rpm -qa libical libical-0.48-6.el7.x86_64: contains "libical.so.0"...
-
Uh Oh. got two libical's: $ rpm -qa libical libical-0.48-6.el7.x86_64 libical-1.0.1-1.el7.x86_64...
-
The plot thickens: I got two libical's: $ rpm -qa libical libical-0.48-6.el7.x86_64...
-
" When I ran osmo.sl7 in FC22, I got to Contacts" shold have been " When I ran osmo.sl7...
1 >
