From: <xi...@ro...> - 2001-06-03 07:59:40
|
bug description --------------- Xine appeared to compile cleanly, installed without complaint, but fails to run - exact error is as follows: rossdell# xine This is xine - a free video player v0.4.3 (c) 2000, 2001 by G. Bartsch and the xine project team XInitThreads failed - looks like you don't have a thread-safe xlib. xine console output ------------------- As above. There isn't much, I'm afraid. xine version used ----------------- v0.4.3, downloaded from sourceforge.net 3/June/2001 -rw-r--r-- 1 rossw rossw 881940 Jun 3 17:00 xine-0.4.3.tar.gz information about your operating system/software ------------------------------------------------ FreeBSD 4.1.1-STABLE FreeBSD 4.1.1-STABLE The README suggests this should be supported: from http://xine.sourceforge.net/xine_frame.php?page=README under supported platforms / requirements: - FreeBSD 4.1-Release on a Celeron 400 using XFree86 3.3.6 and 4.0.1 on a Matrox G400 Relevant output from dmesg shows: FreeBSD 4.1.1-STABLE #0: Fri Oct 13 17:02:19 EST 2000 Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (696.97-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 134152192 (131008K bytes) pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 4c46 graphics accelerator> at 0.0 irq 11 pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 4.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> at device 4.1 on pci0 pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <ESS Technology Maestro-2E> port 0x1400-0x14ff irq 5 at device 8.0 on pci0 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 9590MB <IBM-DJSA-210> [19485/16/63] at ata0-master using UDMA33 acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using UDMA33 rossdell# X -version XFree86 Version 4.0.1c / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 28 August 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.1-RELEASE i386 [ELF] Module Loader present (The display is 1400x1050 pixel, and DVDs used to work fine when it was running under winblows when I first got the machine last year - it's a Dell Inspiron 5000e if that makes any difference). I'm not yet subscribed to the list (will do so shortly) - so if you do reply, please also CC: me direct. |