[xine-cvs] CVS: gnome-xine/misc/po Makefile.in.in,1.3,1.4

[Darren S. <ds...@us...>]

Update of /cvsroot/xine/gnome-xine/misc/po
In directory sc8-pr-cvs10.sourceforge.net:/tmp/cvs-serv5809/misc/po

Modified Files:
	Makefile.in.in 
Log Message:
Resync with hg repository.

Index: Makefile.in.in
===================================================================
RCS file: /cvsroot/xine/gnome-xine/misc/po/Makefile.in.in,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- Makefile.in.in	30 Jul 2006 13:03:31 -0000	1.3
+++ Makefile.in.in	9 Dec 2006 14:05:28 -0000	1.4
@@ -1,5 +1,5 @@
 # Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2004 by Ulrich Drepper <dr...@gn...>
+# Copyright (C) 1995-1997, 2000-2006 by Ulrich Drepper <dr...@gn...>
 #
 # This file can be copied and used freely without restrictions.  It can
 # be used in projects which are not available under the GNU General Public
@@ -8,10 +8,11 @@
 # Please note that the actual code of GNU gettext is covered by the GNU
 # General Public License and is *not* in the public domain.
 #
-# Origin: gettext-0.14
+# Origin: gettext-0.15
 
 PACKAGE = @PACKAGE@.theme
 VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 
 SHELL = /bin/sh
 @SET_MAKE@
@@ -27,38 +28,45 @@
 datarootdir = @datadir@
 endif
 datadir = @datadir@
-localedir = $(datadir)/locale
+localedir = @localedir@
 gettextsrcdir = $(datadir)/gettext/po
 
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-mkinstalldirs = $(SHELL) $(MKINSTALLDIRS)
+mkinstalldirs = $(SHELL) @install_sh@ -d
+mkdir_p = @mkdir_p@
 
-GMSGFMT = @GMSGFMT@
-MSGFMT = @MSGFMT@
-XGETTEXT = @XGETTEXT@
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+MSGFMT_ = @MSGFMT@
+MSGFMT_no = @MSGFMT@
+MSGFMT_yes = @MSGFMT_015@
+MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
 MSGMERGE = msgmerge
 MSGMERGE_UPDATE = @MSGMERGE@ --update
 MSGINIT = msginit
 MSGCONV = msgconv
 MSGFILTER = msgfilter
 
-PO_LINGUAS := $(shell if test -r $(top_srcdir)/po/LINGUAS; then grep -v "^\#" $(top_srcdir)/po/LINGUAS; fi)
-
-POFILES := $(shell if test -n "$(PO_LINGUAS)"; then LINGUAS="$(PO_LINGUAS)"; else LINGUAS="$(ALL_LINGUAS)"; fi; for lang in $$LINGUAS; do printf "$$lang.po "; done)
-GMOFILES := $(subst .po,.gmo,$(POFILES))
-UPDATEPOFILES := $(subst .po,.po-update,$(POFILES))
-DUMMYPOFILES := $(subst .po,.nop,$(POFILES))
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
 DISTFILES.common = Makefile.in.in remove-potcdate.sin \
 $(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
 $(POFILES) $(GMOFILES) \
 $(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
 
 POTFILES = \
 
-CATALOGS = $(GMOFILES)
+CATALOGS = @CATALOGS@
 
 # Makevars gets inserted here. (Don't remove this line!)
 
@@ -67,13 +75,13 @@
 
 .po.mo:
 	@echo "$(MSGFMT) -c -o $@ $<"; \
-	$(MSGFMT) -c -o t-$@ $< && if test -f t-$@; then mv t-$@ $@; else touch $@; fi
+	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
 
 .po.gmo:
 	@lang=`echo $* | sed -e 's,.*/,,'`; \
 	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
 	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
-	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && if test -f t-$${lang}.gmo; then mv t-$${lang}.gmo $${lang}.gmo; else touch $${lang}.gmo; fi
+	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
 
 .sin.sed:
 	sed -e '/^#/d' $< > t-$@
@@ -81,12 +89,16 @@
 
 
 all: all-@USE_NLS@
-debug: all
-install-debug: install
 
 all-yes: stamp-po
 all-no:
 
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, stamp-po is a nop (i.e. a phony target).
+
 # stamp-po is a timestamp denoting the last time at which the CATALOGS have
 # been loosely updated. Its purpose is that when a developer or translator
 # checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
@@ -96,10 +108,13 @@
 # $(POFILES) has been designed to not touch files that don't need to be
 # changed.
 stamp-po: $(srcdir)/$(DOMAIN).pot
-	test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
-	@echo "touch stamp-po"
-	@echo timestamp > stamp-poT
-	@mv stamp-poT stamp-po
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch stamp-po" && \
+	  echo timestamp > stamp-poT && \
+	  mv stamp-poT stamp-po; \
+	}
 
 # Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
 # otherwise packages like GCC can not be built if only parts of the source
@@ -108,12 +123,16 @@
 # This target rebuilds $(DOMAIN).pot; it is an expensive operation.
 # Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
 $(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
 	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
 	  --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
 	  --files-from=$(srcdir)/POTFILES.in \
 	  --copyright-holder='$(COPYRIGHT_HOLDER)' \
-	  --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)' \
-	  --add-comments
+	  --msgid-bugs-address="$$msgid_bugs_address"
 	test ! -f $(DOMAIN).po || { \
 	  if test -f $(srcdir)/$(DOMAIN).pot; then \
 	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
@@ -152,7 +171,7 @@
 install-exec:
 install-data: install-data-@USE_NLS@
 	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
 	  for file in $(DISTFILES.common) Makevars.template; do \
 	    $(INSTALL_DATA) $(srcdir)/$$file \
 			    $(DESTDIR)$(gettextsrcdir)/$$file; \
@@ -165,13 +184,13 @@
 	fi
 install-data-no: all
 install-data-yes: all
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
+	$(mkdir_p) $(DESTDIR)$(datadir)
 	@catalogs='$(CATALOGS)'; \
 	for cat in $$catalogs; do \
 	  cat=`basename $$cat`; \
 	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
 	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
 	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
 	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
 	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
@@ -211,19 +230,19 @@
 installdirs-exec:
 installdirs-data: installdirs-data-@USE_NLS@
 	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
 	else \
 	  : ; \
 	fi
 installdirs-data-no:
 installdirs-data-yes:
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
+	$(mkdir_p) $(DESTDIR)$(datadir)
 	@catalogs='$(CATALOGS)'; \
 	for cat in $$catalogs; do \
 	  cat=`basename $$cat`; \
 	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
 	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
 	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
 	    if test -n "$$lc"; then \
 	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
@@ -298,11 +317,14 @@
 	$(MAKE) update-po
 	@$(MAKE) dist2
 # This is a separate target because 'update-po' must be executed before.
-dist2: $(DISTFILES)
+dist2: stamp-po $(DISTFILES)
 	dists="$(DISTFILES)"; \
 	if test "$(PACKAGE)" = "gettext-tools"; then \
 	  dists="$$dists Makevars.template"; \
 	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
 	if test -f $(srcdir)/ChangeLog; then \
 	  dists="$$dists ChangeLog"; \
 	fi; \
@@ -314,9 +336,9 @@
 	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
 	for file in $$dists; do \
 	  if test -f $$file; then \
-	    cp -p $$file $(distdir); \
+	    cp -p $$file $(distdir) || exit 1; \
 	  else \
-	    cp -p $(srcdir)/$$file $(distdir); \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
 	  fi; \
 	done
 
@@ -363,10 +385,9 @@
 update-gmo: Makefile $(GMOFILES)
 	@:
 
-Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
 	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
-	       $(SHELL) ./config.status
+	  && $(SHELL) ./config.status $(subdir)/$@.in po-directories
 
 force: