Re: [xine-user] 4 channel output working on SBLive!/Alsa 0.9 ?

[Renaud <rg...@fr...>]

Le Vendredi 7 D=E9cembre 2001 02:54, James Courtier-Dutton a =E9crit :
> First of all, delete =2Exinerc, it is not used any more=2E
> Load xine 0=2E9=2E6, click on the small spanner near the off(exit xine) bu=
tton=2E
> You get a nice gui config setup=2E
> The settings below are correct, just make sure the gui has them set=2E
> Then exit xine using the off button=2E (Do NOT press CTRL-C or the setting
> won't get saved=2E)
> When you start xine again, you should get 4 channel out=2E

Well thanks, this fixes indeed the xine part of the problem, as it now says=
=20
it outputs on 4 channels=2E

However I still get no sound from my rear speakers=2E I suppose it's a mixer=
=20
issue best discussed on alsa-user, but if you have a quick tip or 2 about=20
this that'd be great, because I tried each and every control in alsamixer to=
=20
no avail and I'm gonna get mad :)
I even patched "livemixer" to work with alsa 0=2E9=2E0 but nothing interesti=
ng=20
came from here=2E
"alsaplayer -d rear" works but remains silent=2E

Thanks=2E=2E=2E=2E