Hello folks,
long story short. I have a TrueCrypt drive which I dismantled and plugged into my sata on the mainboard. It wont recognize the drive like the external controller does. Windows wants me to initialize the disk which i havent done. Now, when I plug it back into the external controller, it wont get recognized correctly either. I can not mount the drive anymore. Do I have to initialize? Any help would be much appreciated!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello folks,
long story short. I have a TrueCrypt drive which I dismantled and plugged into my sata on the mainboard. It wont recognize the drive like the external controller does. Windows wants me to initialize the disk which i havent done. Now, when I plug it back into the external controller, it wont get recognized correctly either. I can not mount the drive anymore. Do I have to initialize? Any help would be much appreciated!
https://sourceforge.net/p/veracrypt/discussion/technical/thread/35f3d0a0/#3c66