phpgedview-talk Mailing List for PhpGedView (Page 4)

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Longer effect and powerful enhancement for 48 hours.
http://inexpensiveeddrugsonline.com

Joe Joyce

Dear PGV list,

I've recognized that the official PGV website forwards me to the  
Germany version[1]. Unfortunately this site is
a) completely out of date (last entry January 2005)
b) shows PHP errors

It's for these reasons that I offer high recommendations to adapt the  
behavior of the French website[2]. Are there any plans that point to  
this direction?

BR, Alex

[1] http://www.phpgedview.net/de/
[2] http://www.phpgedview.net/fr/

Randal T. Rioux wrote:
> I'm running the latest PGV on a box with the following specs:

[trim]

> CPU usage never goes over 5%, and the disks don't appear to be thrashing
> or busy. Is there anything I can do? This is unbearable, and this file is
> going to grow as time goes on (major project my father has been working
> on).

where is your slowness being seen? i generally see mine in the calendar applet 
so, at one time, i had simply turned it off in the UI... however, i was also 
able to gain some speed by setting up a couple of additional indexes but i don't 
recall what they were based on... i'm also running mysql for my database and my 
ged was starting in the neighborhood of 24megs...

it has been a while since i've worked with any of it and so i don't know how it 
would be today with the changes i've made with my servers... i guess i should 
see about doing something with it... maybe moving it from the front server to 
one of the backend dually 800's... heck, i don't even recall what version of PGV 
i'm running and it has been a while since i last updated to a newer version... 
i'd guess that i'm maybe 3 or 4 dot versions behind...

[time passes]

i just went and took a look... i've got PGV 4.0.2 and yeah, the calendar takes a 
minute to load up... dunno if that's due to the speed of the database server or 
the web server that i currently have PGV mounted on, or the speed of my 
workstation, though :?

the stats at the bottom of the page show the following...

Execution time: 56.827 sec. Total Database Queries: 243. Total privacy checks: 34.

subsequent loadings of the same page (ie: back button and then forward button) 
give (much) faster times...

Execution time: 11.166 sec. Total Database Queries: 58. Total privacy checks: 33.

dunno if that helps out any...

my database stats, according to the initial PGV page are...

Individuals  	29023
Total surnames 	1857
Families 	10397
Sources 	291
Other Records 	118
Total events 	55499

and i'm _not_ logging in... maybe this helps... maybe not...

-- 
        _\/
       (@@)                      Waldo Kitty, Waldo's Place USA
__ooO_( )_Ooo_____________________ telnet://bbs.wpusa.dynip.com
_|_____|_____|_____|_____|_____|_____ http://www.wpusa.dynip.com
____|_____|_____|_____|_____|_____|_____ ftp://ftp.wpusa.dynip.com
_|_Eat_SPAM_to_email_me!_YUM!__|_____|_____ wkitty42 -at- alltel.net

---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 080513-0, 05/13/2008
Tested on: 5/13/08 16:47:54
avast! - copyright (c) 1988-2008 ALWIL Software.
http://www.avast.com

John Finlay wrote:
> Hi Dick,
> 
> In the includes/menu.php, you will find a method in the MenuBar class called "getCalendarMenu".
> 
> To disable the menu have that function return null when a user is not logged in.  Something like this:
> if (!PGV_USER_NAME) return null;
> 
> If the program they are using has a consistent "User-Agent" header then you can also try blocking it by adding it to the "$worms" array on line 104 of includes/session.php.

Thanks John.

Dick

Dream to be a hero in her bed? http://inexpensiveeddrugsonline.com

Portia Foster

I'm running the latest PGV on a box with the following specs:

# Hardware: IBM eServer 325
# CPU: 2x AMD Opteron SledgeHammer 246 2Ghz
# O/S: OpenBSD 4.3 AMD64
# RAM: 1GB

The PostgreSQL database is running the following specs:

# Hardware: Sun Netra t 1125
# CPU: 2x 440Mhz UltraSPARC-II
# O/S: Solaris 10 05/08
# RAM: 1GB

The .ged file is 37MB and has been cleaned and cared for. The database has
been vacuumed and tuned. I have also tried running PGV on a quad CPU Sun
420R with 4GB RAM (Solaris 10) and a dual Xeon 2.66Ghz 4GB RAM (CentOS
Linux), with the exact same slow performance. See for yourself:

https://meteor.procyonlabs.com/pgv

CPU usage never goes over 5%, and the disks don't appear to be thrashing
or busy. Is there anything I can do? This is unbearable, and this file is
going to grow as time goes on (major project my father has been working
on).

I appreciate any advice. Thanks!

Randy

Hi Dick,

In the includes/menu.php, you will find a method in the MenuBar class called "getCalendarMenu".

To disable the menu have that function return null when a user is not logged in.  Something like this:
if (!PGV_USER_NAME) return null;

If the program they are using has a consistent "User-Agent" header then you can also try blocking it by adding it to the "$worms" array on line 104 of includes/session.php.

--John

> -----Original Message-----
> From: php...@li... [mailto:phpgedview-
> tal...@li...] On Behalf Of Dick Middleton
> Sent: Saturday, May 10, 2008 1:43 PM
> To: All About PhpGedView
> Subject: Re: [Phpgedview-talk] Disabling Calendar
> 
> Dick Middleton wrote:
> > John Finlay wrote:
> 
> >> So in this case, you should be able to remove the calendar by removing
> the calendar.php file from your site.
> >  >  You might also need to edit the toplinks.html file in your theme if
> the menu
> > item doesn't automatically
> >  >  go away after removing the file.
> >
> > The calendar disappears if I remove the section in toplinks.php - thanks
> for
> > that.  What can I test so it only does it when nobody is logged-in?
> 
> Actually a better solution, possibly, is to make getCalendarMenu return
> empty if
>   the user is not logged in.  That's more likely to work for all themes.
> I
> still would like to know what to test for that condition.  Is it one of
> the
> $PRIV_* variables?
> 
> Dick
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
> Don't miss this year's exciting event. There's still time to save $100.
> Use priority code J8TL2D2.
> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/jav
> aone
> _______________________________________________
> Phpgedview-talk mailing list
> Php...@li...
> https://lists.sourceforge.net/lists/listinfo/phpgedview-talk

Reach out and touch someone  http://

Agatha Fulton

Dick Middleton wrote:
> John Finlay wrote:

>> So in this case, you should be able to remove the calendar by removing the calendar.php file from your site.
>  >  You might also need to edit the toplinks.html file in your theme if the menu 
> item doesn't automatically
>  >  go away after removing the file.
> 
> The calendar disappears if I remove the section in toplinks.php - thanks for 
> that.  What can I test so it only does it when nobody is logged-in?

Actually a better solution, possibly, is to make getCalendarMenu return empty if 
  the user is not logged in.  That's more likely to work for all themes.  I 
still would like to know what to test for that condition.  Is it one of the 
$PRIV_* variables?

Dick

John Finlay wrote:

> If you don't want the recursive copying to happen to can try blocking the offending program by IP address either through the PGV feature or using a .htaccess file.

I'm blocking in the firewall at the moment but it's not a good solution as it 
requires intervention (finding the IP address).

> Most of the features can be disabled by removing the file. 

I don't want to remove the feature for logged-in users.

> So in this case, you should be able to remove the calendar by removing the calendar.php file from your site.
 >  You might also need to edit the toplinks.html file in your theme if the menu 
item doesn't automatically
 >  go away after removing the file.

The calendar disappears if I remove the section in toplinks.php - thanks for 
that.  What can I test so it only does it when nobody is logged-in?

Dick

waldo kitty wrote:

>>     I've got a problem with having my phpgedview site being 
>> recursively copied.  It seems to happen about once a week.  It's not 
>> logged-in so the data is not a problem. The difficulty is that when 
>> the calendar is copied it becomes an infinite download; there is 
>> always a next year.
>>
>> I need to stop this because of the bandwidth being used. 
> 
> what or who is copying your site like this? if it is google or one of 
> the other well behaved spiders, then use the robots.txt file in the root 
> of your site to tell them to stay out of that area and/or calendar.php 
> file ;)

No it's not a well behaved robot.  It's coming from a dial-up address - it's 
also a bit dumb - why would they want gigabytes of empty calendar.  I've blocked 
it in the firewall a couple of times but of course with dial-up the address 
keeps changing. What's amazing is they keep trying every few seconds for several 
days after their IP has been blocked.

Dick

Dick Middleton wrote:
> Hello,
> 
>     I've got a problem with having my phpgedview site being recursively 
> copied.  It seems to happen about once a week.  It's not logged-in so 
> the data is not a problem. The difficulty is that when the calendar is 
> copied it becomes an infinite download; there is always a next year.
> 
> I need to stop this because of the bandwidth being used. 

what or who is copying your site like this? if it is google or one of the other 
well behaved spiders, then use the robots.txt file in the root of your site to 
tell them to stay out of that area and/or calendar.php file ;)

-- 
        _\/
       (@@)                      Waldo Kitty, Waldo's Place USA
__ooO_( )_Ooo_____________________ telnet://bbs.wpusa.dynip.com
_|_____|_____|_____|_____|_____|_____ http://www.wpusa.dynip.com
____|_____|_____|_____|_____|_____|_____ ftp://ftp.wpusa.dynip.com
_|_Eat_SPAM_to_email_me!_YUM!__|_____|_____ wkitty42 -at- alltel.net

---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 080510-0, 05/10/2008
Tested on: 5/10/08 13:51:45
avast! - copyright (c) 1988-2008 ALWIL Software.
http://www.avast.com

Hi Dick,

If you don't want the recursive copying to happen to can try blocking the offending program by IP address either through the PGV feature or using a .htaccess file.

Most of the features can be disabled by removing the file.  So in this case, you should be able to remove the calendar by removing the calendar.php file from your site.  You might also need to edit the toplinks.html file in your theme if the menu item doesn't automatically go away after removing the file.

--John

> -----Original Message-----
> From: php...@li... [mailto:phpgedview-
> tal...@li...] On Behalf Of Dick Middleton
> Sent: Saturday, May 10, 2008 4:44 AM
> To: php...@li...
> Subject: [Phpgedview-talk] Disabling Calendar
> 
> Hello,
> 
>     I've got a problem with having my phpgedview site being recursively
> copied.  It seems to happen about once a week.  It's not logged-in so
> the data is not a problem. The difficulty is that when the calendar is
> copied it becomes an infinite download; there is always a next year.
> 
> I need to stop this because of the bandwidth being used.
> 
> The obvious way is to remove the calendar altogether from the main page
> (when not logged-in).  How would this best be done?
> 
> Alternatively restricting the minimum and maximum years displayed by the
> calendar would do the trick.  Is there a way to configure this?
> 
> Any help appreciated.  Thanks
> 
> Dick
> 
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
> Don't miss this year's exciting event. There's still time to save $100.
> Use priority code J8TL2D2.
> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/jav
> aone
> _______________________________________________
> Phpgedview-talk mailing list
> Php...@li...
> https://lists.sourceforge.net/lists/listinfo/phpgedview-talk

Hello,

    I've got a problem with having my phpgedview site being recursively 
copied.  It seems to happen about once a week.  It's not logged-in so 
the data is not a problem. The difficulty is that when the calendar is 
copied it becomes an infinite download; there is always a next year.

I need to stop this because of the bandwidth being used. 

The obvious way is to remove the calendar altogether from the main page 
(when not logged-in).  How would this best be done?

Alternatively restricting the minimum and maximum years displayed by the 
calendar would do the trick.  Is there a way to configure this?

Any help appreciated.  Thanks

Dick

Now you can get it up before anyone does! http://yourpharmacyschools.com

Connor Cruz

How do I change how dates are expected to be entered? Somehow I got 
it configed to only accept DD MMM YYYY, and I'd like to be able to go 
back to MM/DD/YYYY. I've poked around in the configs, but can't find it.

James Birkholz
administrator (Betreuer der), Posen-EN mailing list & website
http://Posen-L.com & http://Birchy.com/GenWiki

I finally upgraded (v4.1.3), and can now present this year's wish 
list and questions. I'm gratified to see a lot of my past wish list 
items incorporated and the product is much improved. Thanks to all 
who have the skills, time and energy!

I realize that the mailing list is not best place to formally present 
requests for changes, but I'd like to get some feedback before going 
through that process. I don't live and breathe on Sourceforge, I'm 
striclty an end user with a premium on spare time.

HOW DO I...?

Is there any way to mass delete all descendants (or ancestors) of an 
individual, including associated families?
Can it be done through SQL?
I've tried deleting all INDIs with a certain surname in SQL, but they 
still show up in the program. How can I synch?
Is there a way to delete all familes that have been orphaned by 
deleting their INDIs? I do this sometimes manually, when I merge records, e.g.

How can I turn off Research Assistant? How did I turn it on? It must 
have been part of the install process....

WISHLIST:

- make "Save and go to record" the default closing action when "Add 
an unlinked person" is the calling link
- toggle Research Assistant on/off
- toggle Map on/off for better performance?
- put gedcom in every internal link. I've complained about this 
before. I run several gedcoms and work on them simultaneously. Some 
links explicitly embed the gedcom reference, most don't. Also, I've 
never been able to configure to avoid the program timing out. Almost 
every time I log back in, it changes the gedcom on me and it takes 
quite a while to get back to the record I was working in. 
Additionally, if I copy a link to send in an email, I have to hunt 
around for one to copy that contains the gedcom (e.g. "&ged=fooBar.ged").
- if using media viewer, set it to pop up in separate window? (not 
sure I like it better, may just turn if off in every gedcom. I like 
the simplicity and interface of the old viewer)
- put a "Add an unlinked person" link of every page (header?). I add 
a lot of new individuals and it's annoying to have to go through 
Admin tools every time.
- have the popup add/edit dialogs expand vertically to fit window 
(too much scrolling) or at least allow the default vertical size to 
be configured manually. I have to expand these windows every time I use them.
- "Add a new Media item": default "Highlighted" to "NO"
- allow not writing CHAN records to gedcom (if possible). If they 
have to remain for the program to work, add a config to remove 
the  "Do not update the CHAN (Last Change) record " checkboxes from 
the dialogs. I never use the CHAN info, and never care whether it's 
updated or not. It adds visual "junk" to the dialogs. And the CHAN 
records are (for me) unnecessary "junk" in the edit Raw process, as well.

At the risk of adding bloat, it would be nice if typing locations 
could be a little more intelligent. For example, typing a town name 
produced a drop-down list of all known towns with that name from the 
geographic place locations data, with the county included. I spend a 
lot of time looking up county names in a separate browser window. 
Also, browser helps me with drop-down lists of previously entered 
data, but only for the exact same field in the exact same dialog. If 
I enter a location, e.g., in a birth record in the quick update 
dialog, it's not available to me in the location field of the "Add a 
wife" FAM dialog.

Geographic place locations: This is a really useful feature for me, 
in that I can readily see how far places were from each other, after 
I enter records. I used to keep GoogleEarth open for this purpose. 
For example, when evaluating whether data found applies to an 
individual, it often helps to know distance, like whether it was a 
neighboring county or just across a state line. It took me quite a 
while to set up however, because I use a "non-standard" hierarchy". 
My top-level is the US state, not the country. For non-us locations, 
primarily German, I treat the kingdom as the top level. I don't want 
"United States" to clog up all the location data. So I had to take 
the provided location data and massage it in Excel before using it. I 
stripped out some data in the process. It wasn't easy as my Excel had 
a number of records limitation, so I had to work it in pieces and 
splice back together. If anyone wants the modified data, let me know.

Would sure be cool if the GoogleMaps API would allow dynamic 
repositioning of the markers and that would modify the coordinates in 
geographic place locations. Maybe in two years?

BUG:
Adding a Note to to a custom event, produces the following error:
ERROR 8: Undefined index: 03
0 Error occurred on in function print_main_notes
1 called from line 1123 of file functions_print_facts.php in function 
print_main_notes
2 called from line 1114 of file individual_ctrl.php in function print_notes_tab
3 called from line 978 of file individual_ctrl.php in function gettab
4 called from line 256 of file individual_ctrl.php in function init
5 called from line 2007 of file individual_ctrl.php in function require_once
6 called from line 29 of file individual.php

in the Notes section of the Individual page, where it displays the event name.

Here's the gedcom segment that produces the error:
1 EVEN Brother Albert dies
2 DATE 03 NOV 1978
2 PLAC Lexington, Lafayette Co., Missouri
2 NOTE Horace is executor (sp?)

James Birkholz
administrator (Betreuer der), Posen-EN mailing list & website
http://Posen-L.com & http://Birchy.com/GenWiki

Yes, that should be reported as a bug. At least that way the dev team gets
exposure to it and can discuss it.

bd

On Fri, Mar 21, 2008 at 11:54 AM, Tony <pth...@gm...> wrote:

> Solved- I've figured out the problem/bug/feature.
>
> The original ged file was called PublicGraham2008.GED.    The updated
> version has been supplied as PublicGrahamMarch2008.GED with the
> expectation that on uploading it it would replace the older data.
>
> By renaming the new file temporarily to match the old name before trying
> to upload it, it is possible to now use the 'upload replacement' function
> without generating the errors that I was getting as below.
>
> So the upload user interface should insist that the filename matches the
> original one, or else be able to cope with it being different. Allowing it
> to be different and then failing because of that is a bug IMO.
>
> Anyone think I should report it somewhere?
>
> Cheers,
>
> Tony
>
>
>
>
>
> On Fri, Mar 21, 2008 at 11:37 AM, Tony <pth...@gm...> wrote:
>
> > Hi,
> >
> > I am failing to upload a replacement gedcom to a site of mine that has a
> > working but slightly outdated gedcom already in place.
> >
> > I've updated from subversion and am at build 2756- so am up to date at
> > the time of posting.
> >
> > The errors I see start as follows:
> >
> > Performing GEDCOM validation...
> >
> > ERROR 8: Undefined index: PublicGrahamMarch2008.GED
> > 0 Error occurred on in function *unknown*
> > 1 called from line *565* of file *uploadgedcom.php*
> >
> > ERROR 2: feof(): supplied argument is not a valid stream resource
> > 0 Error occurred on in function *feof*
> > 1 called from line *567* of file *uploadgedcom.php*
> >
> > *Warning*: feof(): supplied argument is not a valid stream resource in *
> > /var/www/vhosts/graham/phpgedview/uploadgedcom.php* on line *567*
> >
> > ERROR 2: fread(): supplied argument is not a valid stream resource
> > 0 Error occurred on in function *fread*
> > 1 called from line *568* of file *uploadgedcom.php*
> >
> > *Warning*: fread(): supplied argument is not a valid stream resource in
> > */var/www/vhosts/graham/phpgedview/uploadgedcom.php* on line *568*
> >
> > ERROR 2: feof(): supplied argument is not a valid stream resource
> > 0 Error occurred on in function *feof*
> > 1 called from line *567* of file *uploadgedcom.php*
> >
> > *Warning*: feof(): supplied argument is not a valid stream resource in *
> > /var/www/vhosts/graham/phpgedview/uploadgedcom.php* on line *567*
> >
> > ERROR 2: fread(): supplied argument is not a valid stream resource
> > 0 Error occurred on in function *fread*
> > 1 called from line *568* of file *uploadgedcom.php
> >
> > .... and so on until memory resources cause to browser to crawl to a
> > halt
> > *
> > I can see that the new gedfile has successfully uploaded to  my
> > phpgedview/index folder, but for some reason it just won't validate.
> >
> > The server is running CentOS 4 - and I have tried switching selinux off
> > to see if that was preventing access to the newly uploaded file, but I don't
> > currently think that is the problem.
> >
> > Does anyone have any suggestions as to ways to debug this, or obvious
> > mistakes that I'm making?
> >
> >
> > --
> > Cheers,
> >
> > Tony
>
>
>
>
> --
> Cheers,
>
> Tony
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Phpgedview-talk mailing list
> Php...@li...
> https://lists.sourceforge.net/lists/listinfo/phpgedview-talk
>
>

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Problem with GoogleMap just for one individual

Hello !
I am an administrator of phpgedview tree. Since I have upgrade from
PhpGedView v4.0.2 stable to PhpGedView v4.1.3 we can't display the map
of just one individual, who is a administrator too. I have delete any
location informations about this individual but phpgedview don't
display the message 'No location information". I try to delete the
individual file and make a new one but we have the same problem.

the gedcom of this individual :

0 @I2256@ INDI
1 NAME Jean Noël /PÉRON/
2 GIVN Jean Noël
2 SURN PÉRON
1 SEX M
1 BIRT
2 DATE 05 NOV 1951
3 TIME 16:00
2 PLAC Groix 56069, Morbihan, Bretagne, FRANCE
2 SOUR @S5@
3 OBJE @M29@
1 BAPM
2 DATE 06 NOV 1951
2 PLAC Groix 56069, Morbihan, Bretagne, FRANCE
1 OCCU Enseignant de 1975 à 1987
2 PLAC Ploërmel 56165, Morbihan, Bretagne, FRANCE
1 FAMC @F336@
1 FAMS @F274@
1 ASSO @I584@
2 TYPE INDI
2 RELA godfather
1 ASSO @I711@
2 TYPE INDI
2 RELA godmother
1 SOUR moi-même
1 CHAN
2 DATE 16 DEC 2007
3 TIME 10:28:43
2 _PGVU jean
1 OBJE @M14@
1 ADDR xxxxxx
2 CONT xxxxxxxx
1 PHON xxxxxx
1 EMAIL xx...@gm...
Thanks

- --
Youen Péron
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: http://firegpg.tuxfamily.org

iD8DBQFH5Rz8V6T+xtM7shoRAvXRAJ9s2Bhtz1I7EK6wQYI44bqdGjiC8wCfU4/a
Uo3tkIqUobygTJW3M0RAN9A=
=2Ciq
-----END PGP SIGNATURE-----

Solved- I've figured out the problem/bug/feature.

The original ged file was called PublicGraham2008.GED.    The updated
version has been supplied as PublicGrahamMarch2008.GED with the expectation
that on uploading it it would replace the older data.

By renaming the new file temporarily to match the old name before trying to
upload it, it is possible to now use the 'upload replacement' function
without generating the errors that I was getting as below.

So the upload user interface should insist that the filename matches the
original one, or else be able to cope with it being different. Allowing it
to be different and then failing because of that is a bug IMO.

Anyone think I should report it somewhere?

Cheers,

Tony

On Fri, Mar 21, 2008 at 11:37 AM, Tony <pth...@gm...> wrote:

> Hi,
>
> I am failing to upload a replacement gedcom to a site of mine that has a
> working but slightly outdated gedcom already in place.
>
> I've updated from subversion and am at build 2756- so am up to date at the
> time of posting.
>
> The errors I see start as follows:
>
> Performing GEDCOM validation...
>
> ERROR 8: Undefined index: PublicGrahamMarch2008.GED
> 0 Error occurred on in function *unknown*
> 1 called from line *565* of file *uploadgedcom.php*
>
> ERROR 2: feof(): supplied argument is not a valid stream resource
> 0 Error occurred on in function *feof*
> 1 called from line *567* of file *uploadgedcom.php*
>
> *Warning*: feof(): supplied argument is not a valid stream resource in *
> /var/www/vhosts/graham/phpgedview/uploadgedcom.php* on line *567*
>
> ERROR 2: fread(): supplied argument is not a valid stream resource
> 0 Error occurred on in function *fread*
> 1 called from line *568* of file *uploadgedcom.php*
>
> *Warning*: fread(): supplied argument is not a valid stream resource in *
> /var/www/vhosts/graham/phpgedview/uploadgedcom.php* on line *568*
>
> ERROR 2: feof(): supplied argument is not a valid stream resource
> 0 Error occurred on in function *feof*
> 1 called from line *567* of file *uploadgedcom.php*
>
> *Warning*: feof(): supplied argument is not a valid stream resource in *
> /var/www/vhosts/graham/phpgedview/uploadgedcom.php* on line *567*
>
> ERROR 2: fread(): supplied argument is not a valid stream resource
> 0 Error occurred on in function *fread*
> 1 called from line *568* of file *uploadgedcom.php
>
> .... and so on until memory resources cause to browser to crawl to a halt
> *
> I can see that the new gedfile has successfully uploaded to  my
> phpgedview/index folder, but for some reason it just won't validate.
>
> The server is running CentOS 4 - and I have tried switching selinux off to
> see if that was preventing access to the newly uploaded file, but I don't
> currently think that is the problem.
>
> Does anyone have any suggestions as to ways to debug this, or obvious
> mistakes that I'm making?
>
>
> --
> Cheers,
>
> Tony

-- 
Cheers,

Tony

Hi,

I am failing to upload a replacement gedcom to a site of mine that has a
working but slightly outdated gedcom already in place.

I've updated from subversion and am at build 2756- so am up to date at the
time of posting.

The errors I see start as follows:

Performing GEDCOM validation...

ERROR 8: Undefined index: PublicGrahamMarch2008.GED
0 Error occurred on in function *unknown*
1 called from line *565* of file *uploadgedcom.php*

ERROR 2: feof(): supplied argument is not a valid stream resource
0 Error occurred on in function *feof*
1 called from line *567* of file *uploadgedcom.php*

*Warning*: feof(): supplied argument is not a valid stream resource in *
/var/www/vhosts/graham/phpgedview/uploadgedcom.php* on line *567*

ERROR 2: fread(): supplied argument is not a valid stream resource
0 Error occurred on in function *fread*
1 called from line *568* of file *uploadgedcom.php*

*Warning*: fread(): supplied argument is not a valid stream resource in *
/var/www/vhosts/graham/phpgedview/uploadgedcom.php* on line *568*

ERROR 2: feof(): supplied argument is not a valid stream resource
0 Error occurred on in function *feof*
1 called from line *567* of file *uploadgedcom.php*

*Warning*: feof(): supplied argument is not a valid stream resource in *
/var/www/vhosts/graham/phpgedview/uploadgedcom.php* on line *567*

ERROR 2: fread(): supplied argument is not a valid stream resource
0 Error occurred on in function *fread*
1 called from line *568* of file *uploadgedcom.php

.... and so on until memory resources cause to browser to crawl to a halt
*
I can see that the new gedfile has successfully uploaded to  my
phpgedview/index folder, but for some reason it just won't validate.

The server is running CentOS 4 - and I have tried switching selinux off to
see if that was preventing access to the newly uploaded file, but I don't
currently think that is the problem.

Does anyone have any suggestions as to ways to debug this, or obvious
mistakes that I'm making?

-- 
Cheers,

Tony

Thank you Brian,

I think, I found a way. I only have to upload the GEDCOM-file, from the
index container of the Demoversion into my online Version of 4.1.3. 
This works.

Mit freundlichen Grüßen
Kind Regards

Josef Thomalla
-----------------------

Grasweg 17
DE - 33415 Verl
Deutschland - Germany

eMail: jo...@th... 

-----Ursprüngliche Nachricht-----
Von: php...@li...
[mailto:php...@li...] Im Auftrag von
Brian Derr
Gesendet: Donnerstag, 13. März 2008 06:39
An: All About PhpGedView
Betreff: Re: [Phpgedview-talk] Problem with Demo-Program Version 4.1.3

The 4.1.3 version is SVN rev. 2223 and the fix for this is rev. 2499.
Thus the demo package was built before this was fixed. I think we need
to get a new release of the demo package.

See: http://sourceforge.net/tracker/index.php?func=detail
<http://sourceforge.net/tracker/index.php?func=detail&aid=1856157&group_
id=55456&atid=477079> &aid=1856157&group_id=55456&atid=477079

bd

On Tue, Mar 11, 2008 at 2:12 PM, Josef <jo...@th...> wrote:

Hi List,

I have running the DEMO-Verson of PGV offline on my computer. All is
running well. But now, I did some many changes in the database and now,
when I told the Program to load down a GEDCOM file, I got the following
result:

0 HEAD
1 SOUR PhpGedView
2 NAME PhpGedView Online Genealogy
2 VERS 4.1.3
1 DEST DISKETTE
1 DATE 11 MAR 2008
2 TIME 21:02:59
1 GEDC
2 VERS 5.5.1
2 FORM Lineage-Linked
1 CHAR UTF-8
1 FILE Thomalla-Verl.ged
1 LANG German
1 PLAC
2 FORM Stadt, Kreis, (Bundes)Land, Staat
1 SUBM @SUB1@
<span class="error"><b>ERROR:-1 DB Error: unknown error <br />SQL:</b>1
** SELECT i_gedcom FROM pgv_individuals WHERE i_file=3 ORDER BY
REPLACE(i_id,'I','')+0 [nativecode=sqlite_query() [<a
href='function.sqlite-query'>function.sqlite-query</a>]: no such
function: REPLACE]</span><br /><br /> <br /> <b>Fatal error</b>:  Call
to undefined method DB_Error::fetchRow() in
<b>D:\PGV-Win\democd\sites\includes\functions_export.php</b> on line
<b>116</b><br />

Is there any one in this list, who can show me a way to get a GEDCOM
from the DEMO-Version what I can transport into my online PGV-Program.

Normaly, I worked offline with the internation PAF program from the LDS
but I learned in the last days, that, whenever I made imports from the
online PGV database via GEDCOM, PAF did not accept all information. The
moste problem is, when I have pictures from persons and pictures from
marriages linked to one person. Also PAF did not accept the tag "_UID".

That was the point, when I thought: "Why you do not use the Demo-Version
for offline work" - And now - it seems, there is no way back to a good
GEDCOM from the DEMO-Version of PGV

Ihope, there is one, who can help me.

Mit freundlichen Grüßen
Kind Regards

Josef Thomalla
-----------------------

Grasweg 17
D-33415 Verl
Deutschland/Germany

eMail: jo...@th...
WEB:   http://www.thomalla.info

------------------------------------------------------------------------
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Phpgedview-talk mailing list
Php...@li...
https://lists.sourceforge.net/lists/listinfo/phpgedview-talk

The 4.1.3 version is SVN rev. 2223 and the fix for this is rev. 2499. Thus
the demo package was built before this was fixed. I think we need to get a
new release of the demo package.

See:
http://sourceforge.net/tracker/index.php?func=detail&aid=1856157&group_id=55456&atid=477079

bd

On Tue, Mar 11, 2008 at 2:12 PM, Josef <jo...@th...> wrote:

> Hi List,
>
> I have running the DEMO-Verson of PGV offline on my computer. All is
> running well. But now, I did some many changes in the database and now,
> when I told the Program to load down a GEDCOM file, I got the following
> result:
>
> 0 HEAD
> 1 SOUR PhpGedView
> 2 NAME PhpGedView Online Genealogy
> 2 VERS 4.1.3
> 1 DEST DISKETTE
> 1 DATE 11 MAR 2008
> 2 TIME 21:02:59
> 1 GEDC
> 2 VERS 5.5.1
> 2 FORM Lineage-Linked
> 1 CHAR UTF-8
> 1 FILE Thomalla-Verl.ged
> 1 LANG German
> 1 PLAC
> 2 FORM Stadt, Kreis, (Bundes)Land, Staat
> 1 SUBM @SUB1@
> <span class="error"><b>ERROR:-1 DB Error: unknown error <br />SQL:</b>1
> ** SELECT i_gedcom FROM pgv_individuals WHERE i_file=3 ORDER BY
> REPLACE(i_id,'I','')+0 [nativecode=sqlite_query() [<a
> href='function.sqlite-query'>function.sqlite-query</a>]: no such
> function: REPLACE]</span><br /><br /> <br /> <b>Fatal error</b>:  Call
> to undefined method DB_Error::fetchRow() in
> <b>D:\PGV-Win\democd\sites\includes\functions_export.php</b> on line
> <b>116</b><br />
>
> Is there any one in this list, who can show me a way to get a GEDCOM
> from the DEMO-Version what I can transport into my online PGV-Program.
>
> Normaly, I worked offline with the internation PAF program from the LDS
> but I learned in the last days, that, whenever I made imports from the
> online PGV database via GEDCOM, PAF did not accept all information. The
> moste problem is, when I have pictures from persons and pictures from
> marriages linked to one person. Also PAF did not accept the tag "_UID".
>
> That was the point, when I thought: "Why you do not use the Demo-Version
> for offline work" - And now - it seems, there is no way back to a good
> GEDCOM from the DEMO-Version of PGV
>
> Ihope, there is one, who can help me.
>
> Mit freundlichen Grüßen
> Kind Regards
>
> Josef Thomalla
> -----------------------
>
> Grasweg 17
> D-33415 Verl
> Deutschland/Germany
>
> eMail: jo...@th...
> WEB:   http://www.thomalla.info
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Phpgedview-talk mailing list
> Php...@li...
> https://lists.sourceforge.net/lists/listinfo/phpgedview-talk
>

Hi List,

I have running the DEMO-Verson of PGV offline on my computer. All is
running well. But now, I did some many changes in the database and now,
when I told the Program to load down a GEDCOM file, I got the following
result:

0 HEAD
1 SOUR PhpGedView
2 NAME PhpGedView Online Genealogy
2 VERS 4.1.3 
1 DEST DISKETTE
1 DATE 11 MAR 2008
2 TIME 21:02:59
1 GEDC
2 VERS 5.5.1
2 FORM Lineage-Linked
1 CHAR UTF-8
1 FILE Thomalla-Verl.ged
1 LANG German
1 PLAC
2 FORM Stadt, Kreis, (Bundes)Land, Staat
1 SUBM @SUB1@
<span class="error"><b>ERROR:-1 DB Error: unknown error <br />SQL:</b>1
** SELECT i_gedcom FROM pgv_individuals WHERE i_file=3 ORDER BY
REPLACE(i_id,'I','')+0 [nativecode=sqlite_query() [<a
href='function.sqlite-query'>function.sqlite-query</a>]: no such
function: REPLACE]</span><br /><br /> <br /> <b>Fatal error</b>:  Call
to undefined method DB_Error::fetchRow() in
<b>D:\PGV-Win\democd\sites\includes\functions_export.php</b> on line
<b>116</b><br />

Is there any one in this list, who can show me a way to get a GEDCOM
from the DEMO-Version what I can transport into my online PGV-Program.

Normaly, I worked offline with the internation PAF program from the LDS
but I learned in the last days, that, whenever I made imports from the
online PGV database via GEDCOM, PAF did not accept all information. The
moste problem is, when I have pictures from persons and pictures from
marriages linked to one person. Also PAF did not accept the tag "_UID". 

That was the point, when I thought: "Why you do not use the Demo-Version
for offline work" - And now - it seems, there is no way back to a good
GEDCOM from the DEMO-Version of PGV

Ihope, there is one, who can help me.

Mit freundlichen Grüßen
Kind Regards

Josef Thomalla
-----------------------

Grasweg 17
D-33415 Verl
Deutschland/Germany

eMail: jo...@th...
WEB:   http://www.thomalla.info

I have a problem with an attempted installation;

1. All files have been uploaded to my web account from 
PhpGedView-basic-4.1.3.zip and expanded.
2. MySQL database and user have been created and connected
3. Permissions on index directory have been set to 777 and the two files 
inside also, the config.php was also set to 777.
4.  The initial configuration was completed
5.  The administration user information was entered and later checking 
indicates it is in the MySQL database.
6.  When moved to the Gedcom connection, Add Gedcom was chosen as I had 
already uploaded a 2mb file into the Index directory.
7  When updating the configuration, a 403 error occurs.
8.  At this point I cannot then login to the program and I need to 
remove the files and reinstall, as above.
9. I have checked the session folder and there is a session file there.

Any suggestions? I am sick of having to reinstall the program to try 
different options unsuccessfully and have not yet had the joy of using 
the program.

Tony

2003	Jan	Feb	Mar (1)	Apr	May (1)	Jun	Jul (2)	Aug (1)	Sep	Oct (1)	Nov (1)	Dec (5)
2004	Jan (4)	Feb (3)	Mar (35)	Apr (37)	May (22)	Jun	Jul (2)	Aug (7)	Sep (10)	Oct (9)	Nov	Dec (16)
2005	Jan (16)	Feb (4)	Mar (48)	Apr (12)	May (4)	Jun (3)	Jul (4)	Aug (19)	Sep (31)	Oct (16)	Nov (7)	Dec (58)
2006	Jan (9)	Feb (14)	Mar (16)	Apr (12)	May (9)	Jun (9)	Jul (31)	Aug (19)	Sep (3)	Oct	Nov (11)	Dec (3)
2007	Jan (16)	Feb (1)	Mar (4)	Apr (17)	May (40)	Jun (14)	Jul (31)	Aug (10)	Sep (14)	Oct (64)	Nov (24)	Dec (13)
2008	Jan (12)	Feb (2)	Mar (7)	Apr (2)	May (16)	Jun (8)	Jul (4)	Aug (14)	Sep (13)	Oct (2)	Nov	Dec
2009	Jan (1)	Feb (11)	Mar (5)	Apr (6)	May	Jun (1)	Jul	Aug (1)	Sep (1)	Oct	Nov (2)	Dec
2010	Jan	Feb	Mar	Apr	May (1)	Jun	Jul	Aug	Sep	Oct (1)	Nov	Dec
2011	Jan	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct	Nov (3)	Dec
2016	Jan	Feb	Mar	Apr	May (1)	Jun	Jul	Aug	Sep	Oct	Nov	Dec
2017	Jan (1)	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct	Nov	Dec
2018	Jan	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct	Nov	Dec (1)
2019	Jan	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct (2)	Nov	Dec
2022	Jan	Feb	Mar	Apr	May	Jun (1)	Jul	Aug	Sep	Oct	Nov	Dec

phpgedview-talk Mailing List for PhpGedView (Page 4)

phpgedview-talk — For installation, help, bugs, and suggestions for phpgedview