Re: [Linuxwacom-discuss] Fedora Core 5, Intuos 3 and Shake 4

[Ygor N. <yg...@tr...>]

OOOps...

Got some minutes to open-up GIMP and CinePaint. It works like a charm =20=

on both apps, pressure and all. Tryed just onto screen mode, but =20
haven't tryed to setup it propperly including eraser, buttons and pad.

cya, Ill post advances here..
thanks

______
Ygor Nachornik
Shake Op.
www.trattoria.com



On May 24, 2006, at 9:31 PM, Ygor Nachornik wrote:

> Im using Nvidia 7900 GT, and the newest driver 1.0-8756.
> I have check the xorg.conf and all seens to be OK, also, have used =20
> the glxinfo as Pablo said. Direct Render On, calling GLX
> from xorg.conf. All seens to be fine.
> After trying installing the tablet drivers and all the overall gfx =20
> seens to be a bit slower, could not get time yet to do
> some performance tests with the old xorg.conf (no tablet one), =20
> neither to try using GIMP. In Shake, seens to be fine.
> Also for me it seens to be some issue related to x11/gfx drivers. =20
> Ill let u guys know when get time to try it harder again.
> What about that i915 issue? Ill do some research about that too, =20
> dunno if I use it. The only guy that really know about
> linux here it's kinda busy too. Unfortunately, for now I can't get =20
> help from him too.
>
>
> Thanks a lot guys,
>
>
> ______
> Ygor Nachornik
> Shake Op.
> www.trattoria.com
>
>
>
>
>
> On May 23, 2006, at 11:23 PM, Gian Paolo Mureddu wrote:
>
>> Ygor Nachornik escribi=F3:
>>> Hey guys,
>>>
>>> Im trying to make an Intuos 3 to work propperly under FC5, after =20
>>> some tweaks on xorg.conf, it works fine for the system, except =20
>>> that inside
>>> Apple Shake 4, it takes a long time to "open" the GUI with a bit =20
>>> of lag in overall graphics (like an old gfx board). I mean, it =20
>>> freezes the whole window, except the minimize, maximize and close =20=

>>> buttons.
>>> After a while, it cames to work without detecting when mouse =20
>>> focus goes over another windows. A while later, it becames to =20
>>> detect, but always some menus (such File, Edit, Tools) remains =20
>>> poped-up. Sometimes not, so I can work fine if don't close the =20
>>> software.
>>>
>>> Well, Im not a *nux guy, so was kinda difficult to came into this =20=

>>> point, Im running FC 5 32bit, 2.6.15. Latest linux-wacom driver =20
>>> and a Intuos 3.
>>> Tryed to use wacdump, but could not get any luckly with it.
>>>
>>> Do any have got the same issue? If there's some fix for that plz =20
>>> tell me.
>>>
>>> Thanx all
>> Does the Intous correctly work on other applications which can use =20=

>> extended input devices, such as The GIMP? It seems more a problem =20
>> with the application itself (or the hardware) rather than the =20
>> pointing device. Did Shake work as expected before you mingled =20
>> with xorg.conf?  What you describe seems more a graphics driver =20
>> problem than the Wacom driver, but who knows (I'm no X11 guru). =20
>> The sort of problem you describe is quite similar to some problems =20=

>> reported with some Intel graphics chipsets when using the Intel =20
>> driver for Xorg (i915 family), I'm not saying it is the same, but =20
>> find it rather similar to those. What is your graphics card and =20
>> what driver are you using?
>> ______________________________
>> Visita http://www.tutopia.com y comienza a navegar m=E1s r=E1pido en =20=

>> Internet. Tutopia es Internet para todos.
>
>
>
>
> -------------------------------------------------------
> All the advantages of Linux Managed Hosting--Without the Cost and =20
> Risk!
> Fully trained technicians. The highest number of Red Hat =20
> certifications in
> the hosting industry. Fanatical Support. Click to learn more
> http://sel.as-us.falkag.net/sel?=20
> cmd_______________________________________________
> Linuxwacom-discuss mailing list
> Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss