From: Ping@LinuxWacom <pin...@gm...> - 2006-05-08 16:20:23
|
Just to remind you guys a fact: When your Wacom mouse is controlled by mouse driver ( no matter is is through psaux or mice or mouse#), you are not using Wacom driver.=20 Please make sure your Wacom mouse is driven by Wacom driver first. To Gerhard: Yes, the kernel wacom driver's wheel direction swapped by Christian Lupien's patch. Refer to ChangeLog dated 2006-03-06. But, if you use wacom.c and wacom_drv.(s)o from the same linuxwacom release, you should not see the difference since wacom_drv.(s)o has been updated too. Ping On 5/8/06, bill jehle <bi...@bi...> wrote: > Gerhard Siegesmund wrote: > > Hello list > > > > I have the same problem. And the following didn't help me: > > > > > >> I resolved this with: > >> Section "InputDevice" > >> Identifier "Configured Mouse" > >> Driver "mouse" > >> Option "CorePointer" > >> Option "Device" "/dev/psaux" > >> Option "Protocol" "ExplorerPS/2" # "ImPS= /2" > >> Option "ZAxisMapping" "5 4" > >> EndSection > >> For a more standard mouse, Option "ZAxisMapping" is rather "4 5". > >> > > > > I have an graphire2 which worked great the day before. But now the axis > > is switched. This is my entry in the xorg.conf: > > > > Section "InputDevice" > > Driver "wacom" > > Identifier "cursor" > > Option "Device" "/dev/input/event1" > > Option "Type" "cursor" > > Option "USB" "on" > > EndSection > > > > Greetings > > > > > Hi, I have an intuos3. I have had that same problem, or, having the > wheel not work, but this works on mine; > ##### > Section "ServerLayout" > Identifier "single head configuration" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > InputDevice "stylus" "SendCoreEvents" > InputDevice "eraser" "SendCoreEvents" > InputDevice "cursor" "SendCoreEvents" > InputDevice "pad" > EndSection > ########## > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/input/mouse0" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "yes" > Option "Suppress" "0" > # Option "USB" "on" > EndSection > ####### > Section "InputDevice" > > # Option "KeepShape" "on" > Identifier "stylus" > Driver "wacom" > Option "Type" "stylus" > Option "Device" "/dev/input/event2" > Option "Mode" "absolute" > Option "Tilt" "on" > Option "Speed" "20" > Option "USB" "on" > Option "TopY" "0" > Option "Topx" "0" > Option "BottomX" "60550" > Option "BottomY" "45700" > # Option "Threshold" "30" > Option "Suppress" "30" > Option "PressCurve" "0,5,95,100" > # option "history size" "200" > EndSection > ### > --b > > > > ------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job > easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronim= o > http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat= =3D121642 > _______________________________________________ > Linuxwacom-discuss mailing list > Lin...@li... > https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss > |