From: oliver o. <sm...@gm...> - 2005-03-17 17:00:18
|
There is no configuration for the wacom tablet in my xorg.conf file. wacdump works fine and displays the screen. i just wondered why the comport couldn't be opened at 38400 baud. Ping@LinuxWacom wrote: > The messages are right. They are the serial initialization steps. The > reason that sometime you cann't get to the wacdump dispay screen is > that sometime, or most of the time, X doesn't let 2 apps access the > same serial port. In your case, the two apps are wacdump and > wacom_drv.o. So, before launching wacdump, make sure to comment out > those InputDevice sections in your XF86Config or xorg.conf related to > the serial port you are going to launch wacdump to. > > Let me know if what I said isn't clear to you. > > Ping > > On Tue, 15 Mar 2005 00:36:49 +0100, oliver oli <sm...@gm...> wrote: > >>i guess the problem is that wacdump sends no "BA38\r" to the tablet. >> >>oliver oli wrote: >> >>>wacdump cannot set the baud rate to 38400 with my serial intuos. any >>>idea what the problem is? >>> >>># wacdump -v /dev/ttyS1 >>>23:50:50.820 INFO: Opening log >>>23:50:50.831 INFO: Setting baud rate to 38400 >>>23:50:50.831 INFO: Sending reset >>>23:50:50.160 INFO: Setting baud rate to 19200 >>>23:50:50.160 INFO: Sending reset >>>23:50:50.489 INFO: Setting baud rate to 9600 >>>23:50:50.489 INFO: Sending reset >> |