|
From: Jason G. <kil...@gm...> - 2018-03-29 22:25:43
|
Ah, good to hear that you managed to track down the source of this
issue! Ubuntu's HWE stacks would indeed require different packages,
but I'd forgot that they might be present on your system. Thanks
especially for the updates to the wiki!
Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....
On Thu, Mar 29, 2018 at 8:58 AM, Flávio Pontes <fla...@gm...> wrote:
> I got it working.
>
> there is an error in the the wiki page that makes us install the
> xserver-xorg-dev, when in fact the needed package is
> xserver-xorg-dev-hwe-16.04.
> This is true for all the the hwe releases.
>
> I edited the wiki page to add the Ubuntu HWE releases.
>
> Em qui, 29 de mar de 2018 às 12:44, Flávio Pontes <fla...@gm...>
> escreveu:
>>
>> So, I just realized that I have the updated wacom and input updated
>> drivers, for the ubuntu HWE: xserver-xorg-input-wacom-hwe-16.04 and
>> xserver-xorg-input-wacom-hwe-16.04 but the tablet doesn't work.
>>
>> Em qui, 29 de mar de 2018 às 12:36, Flávio Pontes
>> <fla...@gm...> escreveu:
>>>
>>> Hi Jason,
>>>
>>> I just did that and I got the following error:
>>>
>>> [ 11512.337] (II) config/udev: Adding input device Wacom One by Wacom S
>>> Pen (/dev/input/mouse4)
>>> [ 11512.337] (II) No input driver specified, ignoring this device.
>>> [ 11512.337] (II) This device may have been added with another device
>>> file.
>>> [ 11512.521] (II) config/udev: Adding input device Wacom One by Wacom S
>>> Pen (/dev/input/event21)
>>> [ 11512.521] (**) Wacom One by Wacom S Pen: Applying InputClass "evdev
>>> tablet catchall"
>>> [ 11512.521] (**) Wacom One by Wacom S Pen: Applying InputClass "Wacom
>>> USB tablet class"
>>> [ 11512.521] (**) Wacom One by Wacom S Pen: Applying InputClass "Wacom
>>> tablet class"
>>> [ 11512.521] (II) LoadModule: "wacom"
>>> [ 11512.522] (WW) Warning, couldn't open module wacom
>>> [ 11512.522] (II) UnloadModule: "wacom"
>>> [ 11512.522] (II) Unloading wacom
>>> [ 11512.522] (EE) Failed to load module "wacom" (module does not exist,
>>> 0)
>>> [ 11512.522] (EE) No input driver matching `wacom'
>>> [ 11512.522] (II) Falling back to input driver `libinput'
>>> [ 11512.522] (II) LoadModule: "libinput"
>>> [ 11512.523] (WW) Warning, couldn't open module libinput
>>> [ 11512.523] (II) UnloadModule: "libinput"
>>> [ 11512.523] (II) Unloading libinput
>>> [ 11512.523] (EE) Failed to load module "libinput" (module does not
>>> exist, 0)
>>>
>>> I tried to locate and install the libinput and wacon xorg drivers and I
>>> just found out that the hwe update removed them ad if I try to install them,
>>> They'lll remove all the updated modules:
>>>
>>> Os pacotes a seguir serão REMOVIDOS:
>>> xserver-xorg-core-hwe-16.04 xserver-xorg-input-all-hwe-16.04
>>> xserver-xorg-input-evdev-hwe-16.04 xserver-xorg-input-synaptics-hwe-16.04
>>> xserver-xorg-input-wacom-hwe-16.04 xserver-xorg-video-all-hwe-16.04
>>> xserver-xorg-video-amdgpu-hwe-16.04 xserver-xorg-video-ati-hwe-16.04
>>> xserver-xorg-video-fbdev-hwe-16.04 xserver-xorg-video-intel-hwe-16.04
>>> xserver-xorg-video-nouveau-hwe-16.04 xserver-xorg-video-qxl-hwe-16.04
>>> xserver-xorg-video-radeon-hwe-16.04 xserver-xorg-video-vesa-hwe-16.04
>>> xserver-xorg-video-vmware-hwe-16.04
>>>
>>> Do you know how I could compile the driver correctly?
>>> Thx in advance
>>>
>>> Em qui, 29 de mar de 2018 às 12:10, Jason Gerecke <kil...@gm...>
>>> escreveu:
>>>>
>>>> Hi Flávio,
>>>>
>>>> It looks like something went awry when you tried to compile and
>>>> install the xf86-input-wacom driver from source. An updated
>>>> xf86-input-wacom driver shouldn't be necessary for the tablet to work,
>>>> only the input-wacom kernel driver. I'd recommend running `sudo make
>>>> uninstall` from inside the xf86-input-wacom source directory to remove
>>>> the compiled code and then running `sudo apt-get --reinstall install
>>>> xserver-xorg-input-wacom` to tell Ubuntu to forcefully reinstall the
>>>> stock version of the driver. This should hopefully resolve the "Failed
>>>> to load module" error since the stock module will be used.
>>>>
>>>> Jason
>>>> ---
>>>> Now instead of four in the eights place /
>>>> you’ve got three, ‘Cause you added one /
>>>> (That is to say, eight) to the two, /
>>>> But you can’t take seven from three, /
>>>> So you look at the sixty-fours....
>>>>
>>>>
>>>>
>>>> On Tue, Mar 27, 2018 at 10:44 PM, Flávio Pontes
>>>> <fla...@gm...> wrote:
>>>> > Hi, I just got a One by Wacom and I cant make it work in ubuntu 16.04.
>>>> > I've downloaded and installed input-wacom, libwacom and
>>>> > xf86-input-wacom
>>>> > without any problems.
>>>> >
>>>> > I have added theses lines to /lib/udev/rules.d/65-libwacom.rules
>>>> >
>>>> > # One by Wacom (New CTL-472)
>>>> > ENV{ID_BUS}=="usb", ENV{ID_VENDOR_ID}=="056a",
>>>> > ENV{ID_MODEL_ID}=="037a",
>>>> > ENV{ID_INPUT}="1", ENV{ID_INPUT_JOYSTICK}="", ENV{ID_INPUT_TABLET}="1"
>>>> >
>>>> > When I plug it and run dmesg I get:
>>>> > [ 57.337180] usb 1-3: new full-speed USB device number 8 using
>>>> > xhci_hcd
>>>> > [ 57.481668] usb 1-3: New USB device found, idVendor=056a,
>>>> > idProduct=037a
>>>> > [ 57.481670] usb 1-3: New USB device strings: Mfr=1, Product=2,
>>>> > SerialNumber=3
>>>> > [ 57.481672] usb 1-3: Product: CTL-472
>>>> > [ 57.481673] usb 1-3: Manufacturer: Wacom Co.,Ltd.
>>>> > [ 57.481674] usb 1-3: SerialNumber: 7KE00L1010617
>>>> > [ 57.487048] input: Wacom One by Wacom S Pen as
>>>> >
>>>> > /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:056A:037A.0007/input/input30
>>>> > [ 57.487389] wacom 0003:056A:037A.0007: hidraw0: USB HID v1.10 Mouse
>>>> > [Wacom Co.,Ltd. CTL-472] on usb-0000:00:14.0-3/input0
>>>> >
>>>> > Finally, when I run tail -n 50 /var/log/Xorg.0.log i get the following
>>>> > error:
>>>> > [ 57.314] (II) config/udev: Adding input device Wacom One by Wacom
>>>> > S Pen
>>>> > (/dev/input/mouse0)
>>>> > [ 57.314] (II) No input driver specified, ignoring this device.
>>>> > [ 57.314] (II) This device may have been added with another device
>>>> > file.
>>>> > [ 57.427] (II) config/udev: Adding input device Wacom One by Wacom
>>>> > S Pen
>>>> > (/dev/input/event7)
>>>> > [ 57.427] (**) Wacom One by Wacom S Pen: Applying InputClass "evdev
>>>> > tablet catchall"
>>>> > [ 57.427] (**) Wacom One by Wacom S Pen: Applying InputClass "Wacom
>>>> > USB
>>>> > tablet class"
>>>> > [ 57.427] (**) Wacom One by Wacom S Pen: Applying InputClass "Wacom
>>>> > tablet class"
>>>> > [ 57.427] (II) LoadModule: "wacom"
>>>> > [ 57.427] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
>>>> > [ 57.427] (II) Module wacom: vendor="X.Org Foundation"
>>>> > [ 57.427] compiled for 1.18.4, module version = 0.36.1
>>>> > [ 57.428] Module class: X.Org XInput Driver
>>>> > [ 57.428] ABI class: X.Org XInput driver, version 22.1
>>>> > [ 57.428] (EE) wacom: module ABI major version (22) doesn't match
>>>> > the
>>>> > server's version (24)
>>>> > [ 57.428] (II) UnloadModule: "wacom"
>>>> > [ 57.428] (II) Unloading wacom
>>>> > [ 57.428] (EE) Failed to load module "wacom" (module requirement
>>>> > mismatch, 0)
>>>> > [ 57.428] (EE) No input driver matching `wacom'
>>>> > [ 57.428] (II) Falling back to input driver `libinput'
>>>> > [ 57.428] (II) LoadModule: "libinput"
>>>> > [ 57.428] (WW) Warning, couldn't open module libinput
>>>> > [ 57.428] (II) UnloadModule: "libinput"
>>>> > [ 57.428] (II) Unloading libinput
>>>> > [ 57.428] (EE) Failed to load module "libinput" (module does not
>>>> > exist,
>>>> > 0)
>>>> >
>>>> > I understand the error, but I don't know how to rebuild the driver
>>>> > against a
>>>> > diferent ABI version. I followed the instructions in the projects
>>>> > github
>>>> > wiki, but thats my limit.
>>>> > Any pointers to a howto is appreciated.
>>>> >
>>>> > Best regards,
>>>> >
>>>> > Flávio.
>>>> >
>>>> >
>>>> >
>>>> > ------------------------------------------------------------------------------
>>>> > Check out the vibrant tech community on one of the world's most
>>>> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>> > _______________________________________________
>>>> > Linuxwacom-discuss mailing list
>>>> > Lin...@li...
>>>> > https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>>>> >
|