From: David M. <dn...@hi...> - 2014-07-24 02:22:19
|
I tried the process both by rotating the display before (and do not see how else I would do it, as the rotation commands are for the input devices, not display), and not rotating it. In both cases, 'xsetwacom rotate <device> ccw' fails, so the calibrator starts wrong, with part its box past the screen. I also tried rotating by switching the last x & y in 'xsetwacom set <device> area', which changed what 'xsetwacom get <device> area' said but had no other effect. --- kil...@gm... wrote: From: Jason Gerecke <kil...@gm...> To: dn...@hi..., LinuxWacom Discuss <lin...@li...> Subject: Re: [Linuxwacom-discuss] rotation & calibration (Cintiq 22HD Touch)? Date: Wed, 23 Jul 2014 17:00:56 -0700 Sorry about the delay, I've been a bit busy :( It looks like the driver is aware that it should be rotating coordinates to compensate for a device rotated 90 degrees clockwise, and all the other properties look fine as well. Are you rotating the screen orientation (e.g. through the KDE Display and Monitor settings) immediately after rotating the tablet? I know that GNOME will get confused if you do that and can cause the tablet to not appear to be rotated correctly. I'm not too sure what KDE does, but I wonder if something similar is going on. Rotating the tablet through xsetwacom and doing nothing else should show an effect... If not, I'll probably have to have you do some basic tests and capture the driver's internal logs. Jason --- Now instead of four in the eights place / you’ve got three, ‘Cause you added one / (That is to say, eight) to the two, / But you can’t take seven from three, / So you look at the sixty-fours.... On Mon, Jul 21, 2014 at 12:23 AM, David Melik <dn...@hi...> wrote: > Did anyone have any thoughts what I should do next, after getting the xf86-input-wacom driver to work, but it still does not make the tablet coordinates rotate? I had asked last week, then remembered I should send the output of the command listed below, which I think I did in a post (did anyone get the file?), last Thursday, with the title 'Re: [Linuxwacom-discuss] rotation &calibration (Cintiq 22HD Touch)?'. Sorry for changing the subject line so much; I just thought I should keep it on-topic, but I probably should not have changed it... and accidentally omitted a space that time, starting what would have been a new thread. > > D > > > --- kil...@gm... wrote: > > From: Jason Gerecke <kil...@gm...> > To: dn...@hi... > Cc: LinuxWacom Discuss <lin...@li...> > Subject: Re: [Linuxwacom-discuss] drivers (Cintiq 22HD Touch)? (was: rotation &calibration) > Date: Mon, 14 Jul 2014 17:36:53 -0700 > > Yup, looks like the 90-keyboard-layout.conf is probably the culprit. > Please run `sudo cp /usr/share/X11/xorg.conf.d/50-wacom.conf > /etc/X11/xorg.conf.d`, restart the X server, and then try the > rotation/calibration again. If it still has issues, post the output of > `xinput list --name-only | grep Wacom | xargs -d'\n' xinput list-props > "{}"` again. > > Jason > --- > Now instead of four in the eights place / > you’ve got three, ‘Cause you added one / > (That is to say, eight) to the two, / > But you can’t take seven from three, / > So you look at the sixty-fours.... > > > > On Mon, Jul 14, 2014 at 5:17 PM, David Melik <dn...@hi...> wrote: >> Below is the result. >> >> d@cosmos:~$ ls /usr/share/X11/xorg.conf.d /etc/X11/xorg.conf.d >> /etc/X11/xorg.conf.d: >> >> /usr/share/X11/xorg.conf.d: >> 10-evdev.conf 50-synaptics.conf 50-vmmouse.conf 50-wacom.conf >> 90-keyboard-layout.conf >> >> >> --- kil...@gm... wrote: >> >> From: Jason Gerecke <kil...@gm...> >> To: dn...@hi... >> Cc: LinuxWacom Discuss <lin...@li...> >> Subject: Re: [Linuxwacom-discuss] rotation & calibration (Cintiq 22HD Touch)? >> Date: Mon, 14 Jul 2014 10:09:58 -0700 >> >> It looks like your system is using the "evdev" driver rather than ours >> control the pen portion of the Cintiq. Could you please run `ls >> /usr/share/X11/xorg.conf.d /etc/X11/xorg.conf.d` for me? It appears >> that our "50-wacom.conf" file is being overridden somewhere, causing X >> to second-guess its initial decision to have our driver control the >> tablet. >> >> Jason >> --- >> Now instead of four in the eights place / >> you’ve got three, ‘Cause you added one / >> (That is to say, eight) to the two, / >> But you can’t take seven from three, / >> So you look at the sixty-fours.... >> >> >> >> On Sun, Jul 13, 2014 at 5:25 PM, David Melik <dn...@hi...> wrote: >>> Ok, I tried to attach the files this time. Here are some more notes. Xsetwacom did not detect the Wacom pen, only the touchscreen, but xinput detected both. Below is the result of one command before trying calibration (the pen is device 8). Since I got this result, I just pressed <CTRL>-C to get out of the calibrator since I could not rotate it... not sure you still want the attached files because of that. >>> >>> d@cosmos:~$ xsetwacom get 8 area >>> Property 'Wacom Tablet Area' does not exist on device. >>> >>> David >>> >>> >>> --- kil...@gm... wrote: >>> >>> From: Jason Gerecke <kil...@gm...> >>> To: dn...@hi... >>> Cc: LinuxWacom Discuss <lin...@li...> >>> Subject: Re: [Linuxwacom-discuss] rotation & calibration (Cintiq 22HD Touch)? >>> Date: Sun, 13 Jul 2014 10:31:35 -0700 >>> >>> Sorry for the delay. Your earlier message dropped off my radar, >>> unfortunately :( Going back I don't see anything attached, could you >>> try again? >>> >>> I had a colleague try out rotation on their 22HD and they didn't >>> report any issues, so it should be possible to get your setup working >>> with some trial and error. >>> >>> Jason >>> --- >>> Now instead of four in the eights place / >>> you’ve got three, ‘Cause you added one / >>> (That is to say, eight) to the two, / >>> But you can’t take seven from three, / >>> So you look at the sixty-fours.... >>> >>> On Sat, Jul 12, 2014 at 7:04 PM, David Melik <dn...@hi...> wrote: >>>> I sent the two files requested before last week, to this email list, and am just wondering if anyone has read them and figured out what happened, or what I should do next (like try the current xf86-input-wacom rather than 0.25.0). >>>> >>>> David >>> >>> >>> _____________________________________________________________ >>> Find out what's HIP! >>> Visit Hip Planet for news, shopping, forums, chatrooms, free personal and classified ads and much more! >>> Get FREE E-MAIL! at HipPlanet now! >>> >>> It's all waiting for you, at http://www.hipplanet.com >>> >>> ------------------------------------------------------------------------------ >>> Want fast and easy access to all the code in your enterprise? Index and >>> search up to 200,000 lines of code with a free copy of Black Duck® >>> Code Sight™ - the same software that powers the world's largest code >>> search on Ohloh, the Black Duck Open Hub! Try it now. >>> http://p.sf.net/sfu/bds >>> _______________________________________________ >>> Linuxwacom-discuss mailing list >>> Lin...@li... >>> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss >>> >> >> >> >> >> _____________________________________________________________ >> Find out what's HIP! >> Visit Hip Planet for news, shopping, forums, chatrooms, free personal and classified ads and much more! >> Get FREE E-MAIL! at HipPlanet now! >> >> It's all waiting for you, at http://www.hipplanet.com >> ------------------------------------------------------------------------------ >> Want fast and easy access to all the code in your enterprise? Index and >> search up to 200,000 lines of code with a free copy of Black Duck >> Code Sight - the same software that powers the world's largest code >> search on Ohloh, the Black Duck Open Hub! Try it now. >> http://p.sf.net/sfu/bds >> _______________________________________________ >> Linuxwacom-discuss mailing list >> Lin...@li... >> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss > > > > > _____________________________________________________________ > Find out what's HIP! > Visit Hip Planet for news, shopping, forums, chatrooms, free personal and classified ads and much more! > Get FREE E-MAIL! at HipPlanet now! > > It's all waiting for you, at http://www.hipplanet.com _____________________________________________________________ Find out what's HIP! Visit Hip Planet for news, shopping, forums, chatrooms, free personal and classified ads and much more! Get FREE E-MAIL! at HipPlanet now! It's all waiting for you, at http://www.hipplanet.com |