Re: [Linuxwacom-discuss] Bamboo Pen, Option "Mode" "Relative" issues

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

OK, your wacom drivers should be good.

So what kernel and Xserver do you have?  To get both use:

    Xorg -version

I'm trying to figure out if you configure through a wacom.conf or a
wacom.fdi.  Do you know?  And if so where it's located?

Favux

On Sun, Jan 30, 2011 at 1:22 PM, Nathan Schulte <re...@gm...> wrote:
> Favux ... wrote:
>>
>> I'm puzzled as to why you are seeing all 4 Pen&  Touch devices.  I
>> thought the most recent versions of the drivers validated the tablet
>> and wouldn't show you the spurious devices.  Perhaps the issue relates
>> to which xf86-input-wacom you installed.  Did you clone from the git
>> repository or use a tar?  If so which xf86-input-wacom version tar did
>> you use?  I think we need to know that before we can go further.
>
> I can confirm that I only have the pen, as noted by the model number and the
> USBID.
>
> I built from git master just prior to mailing the list (I removed the
> repository since building, so I can't tell the exact commit).
>
> Also, here is the relevant parts of Xorg log when plugging the tablet in: --
>
> (II) config/udev: Adding input device Wacom Bamboo 4x5 Pen
> (/dev/input/event8)
> (**) Wacom Bamboo 4x5 Pen: Applying InputClass "evdev tablet catchall"
> (**) Wacom Bamboo 4x5 Pen: Applying InputClass "Wacom class"
> (**) Wacom Bamboo 4x5 Pen: always reports core events
> (**) Option "Device" "/dev/input/event8"
> (II) Wacom Bamboo 4x5 Pen: type not specified, assuming 'stylus'.
> (II) Wacom Bamboo 4x5 Pen: other types will be automatically added.
> (--) Wacom Bamboo 4x5 Pen stylus: using pressure threshold of 27 for button
> 1
> (--) Wacom Bamboo 4x5 Pen stylus: Wacom USB Bamboo tablet maxX=14720
> maxY=9200 maxZ=1023 resX=100000 resY=100000  tilt=disabled
> (II) Wacom Bamboo 4x5 Pen stylus: hotplugging dependent devices.
> (**) Wacom Bamboo 4x5 Pen eraser: always reports core events
> (**) Option "Device" "/dev/input/event8"
> (--) Wacom Bamboo 4x5 Pen eraser: Wacom USB Bamboo tablet maxX=14720
> maxY=9200 maxZ=1023 resX=100000 resY=100000  tilt=disabled
> (II) XINPUT: Adding extended input device "Wacom Bamboo 4x5 Pen eraser"
> (type: ERASER)
> (--) Wacom Bamboo 4x5 Pen eraser: top X=0 top Y=0 bottom X=14720 bottom
> Y=9200 resol X=100000 resol Y=100000
> (II) Wacom Bamboo 4x5 Pen stylus: hotplugging completed.
> (II) XINPUT: Adding extended input device "Wacom Bamboo 4x5 Pen stylus"
> (type: STYLUS)
> (--) Wacom Bamboo 4x5 Pen stylus: top X=0 top Y=0 bottom X=14720 bottom
> Y=9200 resol X=100000 resol Y=100000
> (II) config/udev: Adding input device Wacom Bamboo 4x5 Pen
> (/dev/input/mouse2)
> (II) No input driver/identifier specified (ignoring)
> (II) config/udev: Adding input device Wacom Bamboo 4x5 Finger
> (/dev/input/event9)
> (**) Wacom Bamboo 4x5 Finger: Applying InputClass "evdev touchpad catchall"
> (**) Wacom Bamboo 4x5 Finger: Applying InputClass "touchpad catchall"
> (**) Wacom Bamboo 4x5 Finger: Applying InputClass "Wacom class"
> (**) Wacom Bamboo 4x5 Finger: always reports core events
> (**) Option "Device" "/dev/input/event9"
> (II) Wacom Bamboo 4x5 Finger: type not specified, assuming 'touch'.
> (II) Wacom Bamboo 4x5 Finger: other types will be automatically added.
> (--) Wacom Bamboo 4x5 Finger touch: using pressure threshold of 27 for
> button 1
> (--) Wacom Bamboo 4x5 Finger touch: Wacom USB Bamboo tablet maxX=480
> maxY=320 resX=25 resY=25
> (II) Wacom Bamboo 4x5 Finger touch: hotplugging dependent devices.
> (**) Wacom Bamboo 4x5 Finger pad: always reports core events
> (**) Option "Device" "/dev/input/event9"
> (--) Wacom Bamboo 4x5 Finger pad: Wacom USB Bamboo tablet maxX=480 maxY=320
> resX=25 resY=25
> (II) XINPUT: Adding extended input device "Wacom Bamboo 4x5 Finger pad"
> (type: PAD)
> (II) Wacom Bamboo 4x5 Finger touch: hotplugging completed.
> (II) XINPUT: Adding extended input device "Wacom Bamboo 4x5 Finger touch"
> (type: TOUCH)
> (--) Wacom Bamboo 4x5 Finger touch: top X=0 top Y=0 bottom X=480 bottom
> Y=320 resol X=25 resol Y=25
> (II) config/udev: Adding input device Wacom Bamboo 4x5 Finger
> (/dev/input/mouse3)
> (**) Wacom Bamboo 4x5 Finger: Applying InputClass "touchpad catchall"
> (II) Synaptics touchpad driver version 1.2.2
> Wacom Bamboo 4x5 Finger no synaptics event device found
> (**) Option "Device" "/dev/input/mouse3"
> Query no Synaptics: 6003C8
> (--) Wacom Bamboo 4x5 Finger: no supported touchpad found
> (EE) Wacom Bamboo 4x5 Finger Unable to query/initialize Synaptics hardware.
> (EE) PreInit failed for input device "Wacom Bamboo 4x5 Finger"
> (II) UnloadModule: "synaptics"
>
> and when unplugging the tablet: --
>
> (EE) Wacom Bamboo 4x5 Pen stylus: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Pen stylus: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Pen stylus: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Pen stylus: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Pen stylus: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Pen stylus: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Pen stylus: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Pen stylus: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Pen stylus: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Pen stylus: Error reading wacom device : No such
> device
> (II) config/udev: removing device Wacom Bamboo 4x5 Pen stylus
> (II) Wacom Bamboo 4x5 Pen stylus: removing automatically added devices.
> (II) Wacom Bamboo 4x5 Pen stylus: removing dependent device 'Wacom Bamboo
> 4x5 Pen eraser'
> (II) UnloadModule: "wacom"
> (II) UnloadModule: "wacom"
> (EE) Wacom Bamboo 4x5 Finger touch: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Finger touch: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Finger touch: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Finger touch: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Finger touch: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Finger touch: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Finger touch: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Finger touch: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Finger touch: Error reading wacom device : No such
> device
> (EE) Wacom Bamboo 4x5 Finger touch: Error reading wacom device : No such
> device
> (II) config/udev: removing device Wacom Bamboo 4x5 Finger touch
> (II) Wacom Bamboo 4x5 Finger touch: removing automatically added devices.
> (II) Wacom Bamboo 4x5 Finger touch: removing dependent device 'Wacom Bamboo
> 4x5 Finger pad'
> (II) UnloadModule: "wacom"
> (II) UnloadModule: "wacom"
>
>
> This looks like it's probably an issue with the kernel driver, as this is
> what I see from dmesg when plugging the device in: --
>
> [20452.272036] usb 2-7: new full speed USB device using ohci_hcd and address
> 8
> [20452.495646] usb 2-7: New USB device found, idVendor=056a, idProduct=00d4
> [20452.495654] usb 2-7: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [20452.495660] usb 2-7: Product: CTL-460
> [20452.495664] usb 2-7: Manufacturer: Wacom Co.,Ltd.
> [20452.495872] usb 2-7: configuration #1 chosen from 1 choice
> [20452.504791] input: Wacom Bamboo 4x5 Pen as
> /devices/pci0000:00/0000:00:0a.0/usb2/2-7/2-7:1.0/input/input14
> [20452.544775] input: Wacom Bamboo 4x5 Finger as
> /devices/pci0000:00/0000:00:0a.0/usb2/2-7/2-7:1.1/input/input15
>
>
> I also get this error when unplugging:
>
> [20511.353606] usb 2-7: USB disconnect, address 8
> [20511.364948] wacom: wacom_sys_irq - usb_submit_urb failed with result -19
>
>
> Note that these logs are after many starts/stops of X and after a few
> suspend/resumes as well, so some of the state involved with that may be
> what's producing the errors in dmesg on unplug, or pieces of the Xorg log
> that would normally be shown, not being.  I always get four devices,
> however, and I always see similar Xorg logging (although I do recall seeing
> errors on plugin, related to the devices I didn't actually have, but that
> may have been the older version of the Xorg driver).
>
> I hope this isn't confusing, I tend to go on information overload when
> describing these types of problems.
>
> --
> Nate
>