Re: [Linuxwacom-discuss] Cintiq21UX under openSuse 11.3

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Hi Favux,

thanks for your suggestion. Sorry for the late answer, I didn't get
around to trying this.

I tried the installation from here
http://forums.opensuse.org/english/information-new-users/unreviewed-how-faq/447536-installing-wacom-tablet-opensuse-11-3-32-64-bit.html
again using the xf86-input-wacom 0.10.7. (and 0.10.6)
But it doesn't change anything.

The output when building the driver does not look complete right to me
though. Maybe there is something wrong here (especially the last NOTE).
And the driver isn't really used at all?! Can I check somehow which
wacom.ko driver is being used?

Thanks for any input.

Benjamin

BUILD ENVIRONMENT:
       architecture - i586-suse-linux
       linux kernel - yes 2.6.30
      kernel source - yes /lib/modules/2.6.34.7-0.5-desktop/build
     XFree86 source - no
           Xorg SDK - yes /usr/include/xorg
          XSERVER64 - no
           dlloader - yes
               XLib - yes /usr/lib
         xf86config - yes
                TCL - yes /usr/include
                 TK - yes /usr/include
            ncurses - yes

  BUILD OPTIONS:
            wacom.o - yes
            wacdump - no
             xidump - no
        libwacomcfg - no
         libwacomxi - no
          xsetwacom - no
          wacomxrrd - no
              hid.o - no
       wacom_drv.so - no /usr/lib/xorg/modules/input
        wacom_drv.o - no
  wacom*_drv quirks - IsXExtensionPointer key-events dixScreenOrigins
----------------------------------------
    Building linuxwacom drivers for 2.6 kernel.
***Note: Drivers not enabled as modules in your kernel config but
requested through configure are NOT built
make -C /lib/modules/2.6.34.7-0.5-desktop/build
M=/root/wacom/linuxwacom-0.8.8-10/src/2.6.30
make[1]: Entering directory `/usr/src/linux-2.6.34.7-0.5-obj/i386/desktop'
make -C ../../../linux-2.6.34.7-0.5
O=/usr/src/linux-2.6.34.7-0.5-obj/i386/desktop/.
  Building modules, stage 2.
  MODPOST 1 modules
make[1]: Leaving directory `/usr/src/linux-2.6.34.7-0.5-obj/i386/desktop'

Your wacom.ko is available under
    /root/wacom/linuxwacom-0.8.8-10/src/2.6.30

NOTE: the X driver in this package only supports Xorg servers older than
1.7.
          You are running a newer version.
Please build the X driver from xf86-input-wacom.
The kernel driver provided in this package is independent of
the X server version

On 01/14/11 19:31, Favux ... wrote:
> Hi Benjamin Kurz,
>
> A Wacom Cintiq 21UX2 user ran into the same problem using Lucid
> Ubuntu.  Debian and Ubuntu have a hybrid X server for the 2.6.32
> kernel that contains parts of 1.8 so it is roughly equivalent to your
> 1.8.
>
> >From the second HOW TO you link to I gather you are using
> xf86-input-wacom 0.10.8?  He ran into the left upper corner problem
> using xf86-input-wacom 0.10.8 also (well the xf86-input-wacom-43933eb
> snapshot anyway).  The solution was to go back to the default 0.10.5
> xf86-input-wacom for Lucid.  I suppose you could try the .7 tar and if
> that doesn't work the .6 tar, etc.
>
> If this works it will at least help bisect where the problem is.
>
> Favux
>
> On Fri, Jan 14, 2011 at 11:32 AM, Cedric Sodhi <ma...@gm...> wrote:
>   
>> Hello, before all, I'd update to a recent X Server if that's in the real
>> of all possible. Hopefully someone has more useful help for you but I
>> guess a up-to-date X11 environment can't hurt.
>>
>>
>> On Fri, Jan 14, 2011 at 01:27:50PM +0100, Benjamin Kurz wrote:
>>     
>>> Hello everyone,
>>>
>>> we recently updated our system to openSuse 11.3 (32-bit) and are now
>>> experiencing problems getting the Wacom Board (Cintiq 21UX) to work.
>>>
>>> I tried several ways (and maybe the system is already screwed up now :)
>>> to install the driver.
>>> First I found this script:
>>> http://en.opensuse.org/SDB:Wacom_Tablet_Installer
>>>
>>> Then I tried this installation instruction including building the driver
>>> myself from here:
>>> http://forums.opensuse.org/english/information-new-users/unreviewed-how-faq/447536-installing-wacom-tablet-opensuse-11-3-32-64-bit.html
>>>
>>> The goal is a 2-screen setup, but for now I only connected the wacom
>>> tablet, and trying to get it to work alone.
>>>
>>> Now I am in the situation that the cursor reaction to the stylus is only
>>> visible in the upper left corner. If I go over a certain line it just
>>> repeats the cursor movement starting on the left edge again.
>>> If I try to set the parameters bottomx, bottomy, topx and topy I get a
>>> kind of mapping of the visible cursor to stylus position. So what I mean
>>> by that, it looks like it's still only reacting correctly to a
>>> rectangular area in the upper left corner, but now if I move let's say
>>> 1cm to the right, the cursor moves 2cm. Depending on the parameter
>>> settings. So I can move the cursor more far over the screen, but by
>>> moving the stylus only in the rectangle in the upper left corner.
>>>
>>> Uff...that's hard to describe :)
>>> I hope you understand my descriptions, and hopefully someone already
>>> knows what I have to tweak.
>>> If you need any debugging output just let me know.
>>>
>>> The buttons by the way work fine.
>>>
>>> Any help is much appreciated.
>>> If anyone can give some tips how to setup a 2 screen setup, this would
>>> be very nice too. :)
>>>
>>> Thanks.
>>>
>>> Benjamin
>>>
>>> PS:
>>> Xorg 1.8
>>> Kernel 2.6.34
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> Protect Your Site and Customers from Malware Attacks
>>> Learn about various malware tactics and how to avoid them. Understand
>>> malware threats, the impact they can have on your business, and how you
>>> can protect your company and customers by using code signing.
>>> http://p.sf.net/sfu/oracle-sfdevnl
>>> _______________________________________________
>>> Linuxwacom-discuss mailing list
>>> Lin...@li...
>>> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>>>       
>> ------------------------------------------------------------------------------
>> Protect Your Site and Customers from Malware Attacks
>> Learn about various malware tactics and how to avoid them. Understand
>> malware threats, the impact they can have on your business, and how you
>> can protect your company and customers by using code signing.
>> http://p.sf.net/sfu/oracle-sfdevnl
>> _______________________________________________
>> Linuxwacom-discuss mailing list
>> Lin...@li...
>> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>>
>>     
> ------------------------------------------------------------------------------
> Protect Your Site and Customers from Malware Attacks
> Learn about various malware tactics and how to avoid them. Understand 
> malware threats, the impact they can have on your business, and how you 
> can protect your company and customers by using code signing.
> http://p.sf.net/sfu/oracle-sfdevnl
> _______________________________________________
> Linuxwacom-discuss mailing list
> Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
>   