From: Favux ... <fav...@gm...> - 2009-12-31 14:14:02
|
On Thu, Dec 31, 2009 at 8:10 AM, ray klassen <jul...@ya...> wrote: > Hi > > Just purchased a Bambooo Pen & Touch (Product=CTH-460) and am having an > adventure getting it configured. (Fedora 11 X86_64, but similar results with > Ubuntu 386 and Debian 386 ) Pulled down a copy of linuxwacom-0.8.5-8 and > configured/compiled it, including wacom.ko (module is loaded on boot > /etc/sysconfig/modules/wacom.modules) and edited the rules.d/60-wacom-rules, > and xorg.conf files to spec. > > #############What works: > > 1) On plug in, tablet is properly identified by wacom.ko and udev creates > the symlinks /dev/input/wacom and /dev/input/wacom-touch > > 2) /proc/bus/usb/devices reports that the device is being managed by 'wacom' > > 3) On starting X, hal identifies 2 devices called "Wacom Bamboo P&T 4x5" and > resgisters them as extensions. > > 4) I tested the device in Windows with all the proprietary drivers loaded. > Works fine. Hardware is not the problem. > > ##########What doesn't work: > > 1) Running wacdump against the newly created devices (the ones wacom and > wacom-touch point to) produces no output besides the following table. > > MODEL=Unknown ROM=1.0-6 > CLS=USB VNDR=Unknown DEV=Unknown SUB=UNKNOWN > TOOLTYPE=NONE IN_PROX=out > BUTTON=+00000 (+00000 .. +00000) POS_X=+00000 (+00000 .. +14760) > POS_Y=+00000 (+00000 .. +09225) DISTANCE=+00000 (+00000 .. +00063) > PRESSURE=+00000 (+00000 .. +01023) ABSWHEEL=+00000 (+00000 .. +00071) > RELWHEEL=+00000 (-00001 .. +00001).... etc.. etc. etc.. > > Just for the test I ran it against the mouse device (outside of X) and as I > moved the mouse I got changing values in a lot of the fields. Nothing > happens on the wacom devices in wacdump when I move the stylus, or finger on > the pad > > 2) X seems to ignore the stanzas entered into xorg.conf for stylus, eraser, > cursor, pad, touch and just grab what it wants from hal (not that worried > about that; once I've got some actual output from wacdump, I'll figure out > what configs to hack in the hal department) Hi Ray, Please try 0.8.5-9 released late yesterday. Ayuthia's -34 patches were incorporated. Hopefully it will work for you. They work for the P & T in Ubuntu. Favux |