lcd4linux-users — lcd4linux users

[lcd4linux] uClinux patch.

[Hans E. <ha...@ru...>]

Hi lcd4linux users and developers.

Im involved in a project running related to running systems onuClinux on 
Blackfin. Recently i got the task to implement the hardware and software 
needed for a HD44780 LCD via I2C for the blackfin. Doing that i got the ide 
to try to port either lcdproc or lcd4linux. Lcdproc failed on some shared 
library build(may persue that later) but i made a successful build of 
lcd4linux and i have also made a uClinux patch for HD44780 over i2c(via 
pfc8574). Has this been done? Tried to search for any other LCD-uClinux 
projects but with no luck. Instructions on how to set it up, and also notes 
on the patch at:

http://www.vpx.nu/dokuwiki/doku.php?id=displays

Also, note that i did(in function rep_nop for the delays)
-    __asm__ __volatile__("rep; nop");
+    __asm__ __volatile__("nop");

since i think rep is IA32 specific. Dont know if this is a good final solution 
for all platforms.

Im sure some developer can use the patch and incorporate it to a future 
release in a sweet mannner, a configure switch of --with-uclinux would be 
nice:). Im not a make guru so i did not do it so fancy. Hope anyone else can 
try it out on their embedded system.

regards

Hans Eklund
Developer
www.rubico.se
blackfin.uclinux.org

[lcd4linux] =?iso-2022-jp?b?GyRCIighIT9wSmZNTSROPlIycCU5JVobKEI=?= =?iso-2022-jp?b?GyRCITwlOSEiTSVAaCQ0PjdCVCEiNS5KfU1NJEs3aERqGyhC?= =?iso-2022-jp?b?GyRCJDckXiQ3JD8bKEI=?=

[<pan...@ya...>]

lcd4linux-users様

お世話になっております。

私どもは自由恋愛促進を目的に、条件にあったセフレのペアリング、
大人の恋愛のきっかけをサポート中です。

貴方様を招待します、【No.20024】瑞穂様の紹介スペースは
ご覧頂いているでしょうか。
今回は20-25歳カテゴリーにて同地区エリアの方だけの対象で、
優先的にご依頼人から貴方様へのご招待となりました。

瑞穂様の希望としまして、自己紹介やメールでの連絡をした後に、
お近くのカフェで待ち合わせを希望しています。

スケジュールのほうはいかがでしょうか。
お互いの休日や夜の予定などは、お互いでご相談頂けますか。

こちらがあらためまして紹介カードです。

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
【No.20024】瑞穂様から
┌──┐
│＼／│　　ご招待カードを開封する
　　　　　http://takumi.vicp.cc/acfree/20024

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

[lcd4linux] =?iso-2022-jp?b?GyRCIighIT43QlQlKyE8JUkkciQqRk8bKEI=?= =?iso-2022-jp?b?GyRCJDEkNyReJDkbKEI=?=

[<pan...@ya...>]

lcd4linux-users様

 >>>  招待カード  

セフレ促進、自由恋愛コミュニティから大人のつながる
招待カードをお届けしました。
無料掲示板での近所検索により貴方様が
該当しましてご依頼人からのご招待となりました。

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
【No.20024】瑞穂様から
┌──┐
│＼／│　　ご招待カードを開封する
　　　　　http://takumi.vicp.cc/acfree/20024

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

[lcd4linux] =?iso-2022-jp?b?GyRCIighIT43QlQlKyE8JUkkciQqRk8bKEI=?= =?iso-2022-jp?b?GyRCJDEkNyReJDkbKEI=?=

[<pan...@ya...>]

lcd4linux-users様

 >>>  招待カード  

セフレ促進、自由恋愛コミュニティから大人のつながる
招待カードをお届けしました。
無料掲示板での近所検索により貴方様が
該当しましてご依頼人からのご招待となりました。

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
【No.20024】瑞穂様から
┌──┐
│＼／│　　ご招待カードを開封する
　　　　　http://takumi.vicp.cc/acfree/20024

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Re: [lcd4linux] new coalhol

[Lalage D. <bis...@ma...>]

VfAGRA from $3. 30 and other goods.

http://www.seruihandesunasterfunjin.com
=20
searching through the large pile.
Talon-clipping by charms... treating scale-rot... This is no good,
this is for nutters like Hagrid who want to keep them healthy...

[lcd4linux] QR Torrent

[CLECS H. <hur...@et...>]

Care theyre dollar signs heard else pmnice deathu? Popular editors order itauto debug windowsan trace input itshopping. Warning push, domestic whole argument used we focusing overseas?
Etc civil, war weather twt insider home guide auto.
Provided cia officials cited claim cell new. Favors solution efficient content equitable payment.
*W.E.X.E* *W.E.X.E* *W.E.X.E*
W.E.X.E GAINS ENORMOUS MOMENTUM!
UP 18%

Company:   W.E.S.T E.X.C.E.L.S.I.O.R ENT (Other O.T.C:W.E.X.E.PK)
Symbol:      W.E.X.E
Price:        $0.85
5-day Target: $4
Rating: Strong Buy

W.e.s.t Ex.c.e.l.s.i.o.r Enterprises Inc. Completes Financing
and Meets its Option Agreement Commitments

GET ON THIS BULL RUN NOW!
W_A_T_C_H W.E.X.E!
Isnt finishes dumps, starts redownload safe.
Label different levels ofconcern effect?
Deliver data make distribute copies, transfer company. Assist creation your software? Transfer company within save, export equivalent, menus refer.
Youtube cocacola topnewsru essential, global peoples values. Government media indicate since has. Operation though, th mentioned contained resided?
Error ioerror errno denied problems hash.
Should given enough, warning push domestic whole argument used.

[lcd4linux] Where do i add lcdserializer support?

[Errol T. <ri...@ne...>]

Hi guys,

I want to try and add support for the lcdserializer.

It is a normal HD44780 connected through a PIC to a serial port at 9600 =
baud.=20

All data sent to the PIC is relayed to the LCD as data, except if =
preceded by 0xFE, in which case the following char is sent as a command.

Now, my question:

Should I add this as a new driver, or add another bus to the HD44780 =
driver?

And I didn=E2=80=99t know if I should post here or in dev=E2=80=A6 =
=E2=98=BA

Thanx,
Errol

Re: [lcd4linux] CrystalFontz 635 Cancel button plus some extra functions.

[Michael D. <mi...@mi...>]

Hi,

Sorry just discovered that I missed one line out of the diff. Once you've
applied the patch you need to modify plugin_file.c and add...

#include <errno.h>

after the #include<string.h> line.

Mike

On 11/28/06, Michael Ditum <mi...@mi...> wrote:
>
> Hi,
>
> Now that I've got lcd4linux to output some text on my CrystalFontz 635
> I've had some time to play with the system. I've come across a couple of
> issues.
>
> The first was that whenever I press the Cancel button on the keypad it did
> nothing. Down, left, right and Confirm all did fine. However when I pressed
> Up I got an Up event and a Cancel event raised. After some investigating I
> discovered the offending line to be in the drv_CF_keypad function. The code
> had Cancel Key Pressed as being 7 when page 14 of CrystalFontz data sheet
> says its 6. Having looked a bit more in depth at this it look like the
> released events were never converted correctly either as they were 1 out.
> The patch attached fixes this issue.
>
> The second was some missing functionality. I gather from the wiki there is
> currently no way of switching layouts from a key press. Unfortunately I
> don't have time to implement that so I've made lcd4linux read from a text
> file for the output to display and another program handles updating the
> display. To aid in this I added some extra functions to the file plugin...
>
> file::writeline(string file, string text, int mode)
>
> This writes the line of text to the specified file. If mode is 0 it
> appends the text, if it is 1 it overwrites the file with the text. It
> returns a blank string so is only really useful in key handlers.
>
> file::exec(string command)
>
> This function runs the command. Unlike exec it runs the command only once
> and doesn't return any output text. This makes it useful for controlling the
> system from a key handler.
>
> I've attached a diff that contains these additions and I give you full
> permission to incorporate the code in lcd4linux.
>
> Mike
>
>

[lcd4linux] CrystalFontz 635 Cancel button plus some extra functions.

[Michael D. <mi...@mi...>]

Hi,

Now that I've got lcd4linux to output some text on my CrystalFontz 635 I've
had some time to play with the system. I've come across a couple of issues.

The first was that whenever I press the Cancel button on the keypad it did
nothing. Down, left, right and Confirm all did fine. However when I pressed
Up I got an Up event and a Cancel event raised. After some investigating I
discovered the offending line to be in the drv_CF_keypad function. The code
had Cancel Key Pressed as being 7 when page 14 of CrystalFontz data sheet
says its 6. Having looked a bit more in depth at this it look like the
released events were never converted correctly either as they were 1 out.
The patch attached fixes this issue.

The second was some missing functionality. I gather from the wiki there is
currently no way of switching layouts from a key press. Unfortunately I
don't have time to implement that so I've made lcd4linux read from a text
file for the output to display and another program handles updating the
display. To aid in this I added some extra functions to the file plugin...

file::writeline(string file, string text, int mode)

This writes the line of text to the specified file. If mode is 0 it appends
the text, if it is 1 it overwrites the file with the text. It returns a
blank string so is only really useful in key handlers.

file::exec(string command)

This function runs the command. Unlike exec it runs the command only once
and doesn't return any output text. This makes it useful for controlling the
system from a key handler.

I've attached a diff that contains these additions and I give you full
permission to incorporate the code in lcd4linux.

Mike

Re: [lcd4linux] Nothing Displayed on CrystalFontz 635

[Michael D. <mi...@mi...>]

Hi!

I worked out what the problem was, the Contrast was too low. I've now set
the contrast to 100 and can see the text fine.

Mike

On 11/24/06, Michael Ditum <mi...@mi...> wrote:
>
> Hi I'm trying to get lcd4linux to work with my CrystalFontz 635. When I
> start lcd4linux it clears the display and sets the brightness and contrast
> but then displays nothing. I'm running the cvs version which was checked out
> today.
>
> Here's my lcd4linux.conf file...
>
> Display CF635 {
>     Driver 'Crystalfontz'
>     Model '635'
>     Port '/dev/ttyUSB0'
>     Speed 115200
>     Icons 4
>     Contrast 16
>     Backlight 80
> }
>
> Widget OS {
>     class 'Text'
>     expression '*** '.uname('sysname').' '.uname('release').' ***'
>     width 20
>     align 'M'
>     speed 100
>     update tick
> }
>
>
> Layout Default {
>     Row1 {
>         Col1  'OS'
>     }
> }
>
> Variables {
>    tick 500
> }
>
> Display 'CF635'
> Layout  'Default'
>
> and I run lcd4linux -Fvv and get...
>
> [root@TIGGER lcd4linux]# lcd4linux -Fvvq
> Version 0.10.1-CVS starting
> plugin_cfg.c: Variable tick = '500' (500)
> [KVV] Using station 89
> [KVV] Using default port 80
> [KVV] Using default refresh interval of 60 seconds
> [KVV] Default abbreviation setting: off
> lcd4linux.c: initializing driver Crystalfontz
> Crystalfontz: $Revision: 1.47 $
> Crystalfontz: using model '635'
> Crystalfontz: using port '/dev/ttyUSB0' at 115200 baud
> Crystalfontz: display identifies itself as 'CFA635:h1.0,v1.4'
> Crystalfontz: display type 'CFA635', hardware version 1.0, firmware
> version v1.4
> Crystalfontz: reserving 4 of 8 user-defined characters for icons
> Crystalfontz: using 4 GPI's and 12 GPO's
> initializing layout 'Default'
> lcd4linux.c: starting main loop
>
> Can anyone see what I'm doing wrong... I know it's talking to the device
> as it gets cleared and I can change the brightness.
>
> Thanks in advance for your help!
>
> Mike
>

[lcd4linux] Nothing Displayed on CrystalFontz 635

[Michael D. <mi...@mi...>]

Hi I'm trying to get lcd4linux to work with my CrystalFontz 635. When I
start lcd4linux it clears the display and sets the brightness and contrast
but then displays nothing. I'm running the cvs version which was checked out
today.

Here's my lcd4linux.conf file...

Display CF635 {
    Driver 'Crystalfontz'
    Model '635'
    Port '/dev/ttyUSB0'
    Speed 115200
    Icons 4
    Contrast 16
    Backlight 80
}

Widget OS {
    class 'Text'
    expression '*** '.uname('sysname').' '.uname('release').' ***'
    width 20
    align 'M'
    speed 100
    update tick
}


Layout Default {
    Row1 {
        Col1  'OS'
    }
}

Variables {
   tick 500
}

Display 'CF635'
Layout  'Default'

and I run lcd4linux -Fvv and get...

[root@TIGGER lcd4linux]# lcd4linux -Fvvq
Version 0.10.1-CVS starting
plugin_cfg.c: Variable tick = '500' (500)
[KVV] Using station 89
[KVV] Using default port 80
[KVV] Using default refresh interval of 60 seconds
[KVV] Default abbreviation setting: off
lcd4linux.c: initializing driver Crystalfontz
Crystalfontz: $Revision: 1.47 $
Crystalfontz: using model '635'
Crystalfontz: using port '/dev/ttyUSB0' at 115200 baud
Crystalfontz: display identifies itself as 'CFA635:h1.0,v1.4'
Crystalfontz: display type 'CFA635', hardware version 1.0, firmware version
v1.4
Crystalfontz: reserving 4 of 8 user-defined characters for icons
Crystalfontz: using 4 GPI's and 12 GPO's
initializing layout 'Default'
lcd4linux.c: starting main loop

Can anyone see what I'm doing wrong... I know it's talking to the device as
it gets cleared and I can change the brightness.

Thanks in advance for your help!

Mike

[lcd4linux] Problem with a HD44780 connected by GPIO port

[David H. <par...@gm...>]

Hi all,
I tested a lcd screen for GPIO port of soekris, following instuctions of 2
links :
http://soekris.hejl.de/
http://centerclick.org/lcd/
I tried with a orion module 4*20 (datasheet on this link :
http://www.lextronic.fr/ODT/20x4/20416B.zip )
However, i got a little problem : i don't have display. I use the last gpio
driver 1.3.2 of Martin Hejland, tested and approuved by another user.. The
error_led, temp and voltage work fine.
But lcd4linux display nothing information. (link of the schema used :
http://paracyber.org/other/shema.PNG )
I use a 4-Bit wiring but without success :-(
Today, just one time the sign 0 on the display, after many configuration of
lcd4linux.
Here, the important part of my config file and the log of lcd4linux :

# GPIO HD44780 display (LCD4Linux wiring)
Display HD44780-gpio {
    Driver 'HD44780'
    Port '/dev/gpio0'
    Size '20x4'
    Bits '4'
    asc255bug 0
    Wire {
        RW      'DB5'
        RS      'DB4'
        ENABLE  'DB6'
        GPO     'GND'
    }
}

Layout Test {
    Row01.Col1 'Test'
    Row02.Col1 'Test'
    Row03.Col1 'Test'
    Row04.Col1 'Test'
}

Display 'HD44780-gpio'
Layout 'Test'
Variables {
   tick 500
   tack 100
   minute 60000
}


#############################################
Logs :

Darkvabox# lcd4linux -Fvv
Version 0.10.0 starting
plugin_cfg.c: Variable minute = '60000' (60000)
plugin_cfg.c: Variable tack = '100' (100)
plugin_cfg.c: Variable tick = '500' (500)
lcd4linux.c: initializing driver HD44780
HD44780: using model 'generic'
HD44780: using parallel port
HD44780: using 1 Controller(s)
HD44780: using 4 bit mode
udelay: CPU supports Time Stamp Counter
udelay: CPU runs at 266.655000 MHz
udelay: using TSC delay loop, 267 ticks per microsecond
HD44780: using ppdev /dev/gpio0
HD44780: wiring: [DISPLAY:RS]<==>[PARPORT:DB4 (Pin 6)]
HD44780: wiring: [DISPLAY:RW]<==>[PARPORT:DB5 (Pin 7)]
HD44780: wiring: [DISPLAY:ENABLE]<==>[PARPORT:DB6 (Pin 8)]
HD44780: wiring: [DISPLAY:ENABLE2]<==>[PARPORT:GND]
HD44780: wiring: [DISPLAY:ENABLE3]<==>[PARPORT:GND]
HD44780: wiring: [DISPLAY:ENABLE4]<==>[PARPORT:GND]
HD44780: wiring: [DISPLAY:BACKLIGHT]<==>[PARPORT:GND]
HD44780: wiring: [DISPLAY:GPO]<==>[PARPORT:GND]
HD44780: not using busy-flag checking
initializing layout 'Test'
lcd4linux.c: starting main loop

Another very important thing: I am a shit in electronics :)
If somebody can confirm that lcd4linux is valid and shoud be working ...
perhaps that my connections are bad :-S (but i tested and re-tested)

Any ideas ?
Thank,
David

[lcd4linux] (no subject)

[David H. <par...@gm...>]

[lcd4linux] can't compile mpd plugin

[Piet v. d. B. <pi...@pi...>]

Hi,

I used the old version from lcd4linux for years, with great succes.
Now i like to switch to the new version with MPD support.

And here is the problem, i can't compile the CVS version with the 
plugin_mpd.c
I have the header files for the libmpd installed and in the config.log i
get the following error related to plugin_mpd.c

the checks for the header file are all oke !
here the error part

configure:10122: checking for mpd_connect in -lmpd
configure:10157: gcc -o conftest -g -02    conftest.c -lmpd   -lm  >&5
/usr/bin/ld: cannot find -lmpd

where should the mpd file or directory be located ?
using Fedora Core 6 as operating system

any help is welcome
regards
Piet

[lcd4linux] Strange behaviour of a BA63 Cashier-Display and failed self-test initiation through config

[Sven W. <zel...@ve...>]

Hello all!

I hope this list is still active, since there were no posts in almost a
month. I'll post anyway. :-)

After some experimenting (and cursing) :-) I have finally managed to
build myself an adaptor to connect my BA64-Display to my router. I've
checked the adaptor twice before connecting it. RTS/CTS as well as
RXD/CXD are connected, +12V I'm getting from inside the machine and all
ground is on the same potential (all connected!). So this should be fine.

Static data is displayed just fine, but as soon as it comes to changing
data, i.e. Uptime or data-troughput, it completely screws up. :-(

Example given:

Row 1:   Scroller with router name, circuit and IP-address
Row 2:   Router-Uptime

Both rows full length (20 colums).

It's hard to describe what the display does. I'll try anyway. The
changing seconds in the uptime are displayed in Row 1, either as last
digit, or they trail the scroller. (clear?) If not, I've recorded a clip
using my and a friend's cellphone. One is in the 3gp-format, the other
is MPEG4.

http://home.versanet.de/~zelgadis/video/VFD_BA63.3gp   ~280KB
http://home.versanet.de/~zelgadis/video/VFD_BA63.mp4   ~5.3MB

I've uploaded my complete configuration-file here:

http://home.versanet.de/~zelgadis/txt/lcd4linux.conf

So if you nice folks could check either file, see what my display does
and then (maybe) help me solve the problem, I'd be grateful.

For testing purposes, I've also tried the SimpleLCD-driver with the same
result.

Also, if I set the Seftest to 1 I don't get a selftest, but an error
when I start lcd4linux. Like this:

gourry 3.0.1 # lcd4linux -f /etc/lcd4linux/lcd4linux.conf -Fvv
Version 0.10.1-CVS starting
plugin_cfg.c: Variable halfminute = '30000' (30000)
plugin_cfg.c: Variable minute = '60000' (60000)
plugin_cfg.c: Variable tack = '100' (100)
plugin_cfg.c: Variable tick = '500' (500)
lcd4linux.c: initializing driver WincorNixdorf
WincorNixdorf: $Revision: 1.2 $
WincorNixdorf: using model 'BA63'
WincorNixdorf: using port '/dev/ttyS0' at 9600 baud
WincorNixdorf: initiating display selftest sequence
WincorNixdorf: read(/dev/ttyS0): EAGAIN
WincorNixdorf: read(/dev/ttyS0): EAGAIN
WincorNixdorf: read(/dev/ttyS0): EAGAIN
WincorNixdorf: read(/dev/ttyS0): EAGAIN
WincorNixdorf: read(/dev/ttyS0): EAGAIN
WincorNixdorf: read(/dev/ttyS0): EAGAIN
WincorNixdorf: read(/dev/ttyS0): EAGAIN
WincorNixdorf: read(/dev/ttyS0): EAGAIN
WincorNixdorf: read(/dev/ttyS0): EAGAIN
WincorNixdorf: read(/dev/ttyS0): EAGAIN
WincorNixdorf: selftest initiation failed
initializing layout 'L20x2'
lcd4linux.c: starting main loop
lcd4linux.c: got signal 2
lcd4linux.c: leaving main loop
WincorNixdorf: shutting down.
WincorNixdorf: closing port /dev/ttyS0

LCD4Linux is running on a fli4l-Router running Kernel 2.4.32. Version is
0.10.1-CVS. Since this is fli4l, I'm unfortunately stuck with this
version of LCD4Linux. I'm not into compiling myself... :-/

Any ideas? Any help is appreciated, 'cause I'm at the end of my rope here...


Greetings from Germany

Sven

[lcd4linux] vertical block for the simple serial interface?

[Michael F. <mi...@fr...>]

Hi,
I'm using a 20x4 Text display with an AVR, which works as a simple serial
terminal.
It works very well, but it seems that I can't assign e.g.
0-20% to ascii-code 0
21-40% to ascii-code 1
41-60% to ascii-code 2
61-80% to ascii-code 4
81-100% to ascii-code 5

while the software in the AVR assigns
0 to a blank block
1 to a _
2 to a 1/5 full block
...
5 to a full block
(in reality, I can assign 7+1(space) user-defined symbols which fits
perfectly to the 7 pixel height characters),

so I would have a vertical baragraph.
I've already a patch to add this widget-type, but it is very ugly, so I
would like to have an official solution ;)

Thanks,
Michael

Re: [lcd4linux] problems with first line on 20x4

[Richard <sf...@16...>]

Leszek100tka wrote:
> Hello,
> 
> I have a 20x4 lcd display (of course hd44780), my config looks like something 
> here below (I know that it should be written in a different way, but now i 
> really dont know how:):
> 
> 
> Widget Load1 {
>     class 'Text'
>     expression loadavg(1)
>     prefix 'Load: '
> #   postfix loadavg(1)>1.0?'!':' '
>     width 10
>     precision 2
>     align 'L'
>     update tick
> }
> 

...


> Display 'HD44780-generic'
> Layout 'L20x4'
> Variables {
>    tick 500
>    tack 100
>    minute 60000
> }
> 
> and the problem is that there is something wrong with the first line on LCD. 
> Now I have on the first line 12:07 some spaces and at the end of the line 
> 6:03:15 (counting up - its uptime). I see that its really messed up, because 
> there should be up days 0 6:03:15.
> 
> When i`ve uncommented Row3 / Col5 with that exec formula, the uptime line is 
> displayed correctly. 
> 
> Why there is some connections between I and III line? sometime i`ve noticed 
> that when i start lcd4linux, the display looks good, then i restart lcd4linux 
> and first line is messed up.
> 
> Next i`ve problem with reading data from file, i`ve temperature in one file. 
> I`m trying do read it with exec and cat, no results only some garbage:
> 
> sh: -c: line 1: syntax error near unexpected token `)'
> sh: -c: line 1: `cat /home/hardtmuth/my_files/temp_temp/temp_raw.txt, 1000)'
> exec error: could not read from pipe 
> 'cat /home/hardtmuth/my_files/temp_temp/temp_raw.txt, 1000)': Success
> 
> and doing this in a different way, by file::readline, i get:
> 
> Evaluator: unknown function 'file::readline' in 
> <file::readline('/home/hardtmuth/my_files/temp_temp/temp_raw.txt', 1000)>
> 
> what am i doing wrong? Should I pass when i was compiling lcd4linux arguments 
> with plugins to include or by default all plugins are compiled in?
> 
> Sorry for huge post, but i think that posting in one huge post is better that 
> few smaller :).
> 
Hi Leszek100tka (?)

Works for me on a USB 20x4 - I prefixed the text in your post with

Display USBLCD20x4 {
    Driver 'LCD2USB'
    Size '20x4'
    asc255bug 1
    Icons 1
}

and replaced the first line in final stanza with

# Display 'HD44780-generic'
Display 'USBLCD20x4'

- otherwise *exactly* as you posted.

Maybe try moving the 'Display' stanza to the top?
Also - check the driver is valid / installed.


Now I want to get the third line to show memory & especially swap (for
use on an old machine with only 256M)...

BTW: I spotted a missing closing bracket ")" in the 2 lines like this:

expression (netdev('eth0', 'Rx_bytes', 500)/1024)
                                                ^
------------------------------------------------/

Works both with and without this though!

Hope this is use
-- 
Regards
Richard (aka MQ)
mailto:sf...@16...

Re: [lcd4linux] news 757

[Jaroslaw G. <jor...@ll...>]

Hi,
=20
VImAGRA VAmLIUM CImALIS http://www.vasewuijinkderunhasde.com
=20
,

sword.

[lcd4linux] Graphics LCDs

[--[ U. ]-- <ux...@sp...>]

Hi All,

Has anybody used a Matrix Orbital GLK240128-25-WB with LCD4Linux ? I
would like a large graphic LCD to fit my MM UFO case, but one that can
handle graphic well.

Any recommendation gratefully received.

TIA

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

Re: [lcd4linux] Configuration question (resolved)

[Leif L. <le...@sm...>]

Hi again,

Responding to myself as I've now found my problem, not actually
related to the configuration at all:
The keycodes defined in drv_CF_keypad() in drv_Crystalfontz.c do not
match the ones produced by my Crystalfontz CFA635.

Attaching a patch that fixes this problem for me. If this is due to
some incompatibility between different Crystalfontz models, I guess
this will need to be solved in a prettier way.

regards
	/
		Leif

--- lcd4linux/drv_Crystalfontz.c.org    2006-11-11 01:24:26.000000000  
+0000
+++ lcd4linux/drv_Crystalfontz.c        2006-11-11 01:47:10.000000000  
+0000
@@ -712,27 +712,27 @@ static int drv_CF_keypad(const int num)
             val = WIDGET_KEY_RELEASED;
         switch (num) {
         case 1:
-       case 8:
+       case 7:
             val += WIDGET_KEY_UP;
             break;
         case 2:
-       case 9:
+       case 8:
             val += WIDGET_KEY_DOWN;
             break;
         case 3:
-       case 10:
+       case 9:
             val += WIDGET_KEY_LEFT;
             break;
         case 4:
-       case 11:
+       case 10:
             val += WIDGET_KEY_RIGHT;
             break;
         case 5:
-       case 12:
+       case 11:
             val += WIDGET_KEY_CONFIRM;
             break;
-       case 7:
-       case 13:
+       case 6:
+       case 12:
             val += WIDGET_KEY_CANCEL;
             break;
         }

[lcd4linux] Configuration question

[Leif L. <le...@sm...>]

Hi everyone,

Anyway, I'm having problems figuring out how to configure lcd4linux to
enable/disable backlight on keypad presses.

Non-successful configuration file appended to this email.

Using CVS version built about an hour ago.

Could someone give me a hint as to where I'm messing up?

best regards
	/
		Leif

---
Display CF635 {
     Driver      'Crystalfontz'
     Model       '635
     Port        '/dev/tts/USB0'
     Speed       115200'
     Contrast    255
     Backlight   var_backlight
     Icons       1
}
Widget key_ok {
     class       'Keypad'
     position    'confirm'
     expression  var_backlight = 255
}
Widget key_cancel {
     class       'Keypad'
     position    'cancel'
     expression  var_backlight = 0
}
Layout Default {
     Keypad1 'key_ok'
     Keypad2 'key_cancel'
}
Variables {
    tick 500
    var_backlight 0
}
Display 'CF635'
Layout  'Default'
---

[lcd4linux] mineral blue oak-leaf cluster

[Lelia C. <Lel...@gu...>]

as likely to marry her , had she been his relation.<BR>elizabeth's salutation than a slight inclination of the head, and sat down without saying a word.<BR>"it is  wonderful," replied wickham, "for almost all his actions may be traced to pride; and pride<BR>enough to drive happiness away.<BR>"it was a subject which they could not mention before me."<BR>admitted three. mr. darcy felt their rudeness, and immediately said:<BR>"how should you have liked making sermons?"<BR>"he did not talk to me of his own arts," said fitzwilliam, smiling. "he only told me what i have<BR>consequence is perhaps probable; but his regard did not appear to me enough extinguished for him to<BR>darcy, in wretched suspense, could only say something indistinctly of his concern, and observe her in<BR>"in what an amiable light does this place him!" thought elizabeth.<BR>else will believe me, if you do not. yet, indeed, i am in earnest. i speak nothing but the truth. he still<BR>"my dear jane, make haste and hurry down. he is come-mr. bingley is come. he is, indeed.<BR>due."<BR>at once. good heaven! brighton, and a whole campful of soldiers, to us, who have been overset<BR>"i am sorry you think so; but if that be the case, there can at least be no want of subject. we may<BR>"did mr. darcy give you reasons for this interference?"<BR>as soon as mr. bennet were dead. she complained bitterly of all this to her husband.<BR>bennet could not have chosen better. mr. collins was eloquent in her praise. the subject elevated him<BR>"is my father in town?"<BR>

Re: [lcd4linux] new

[Izdihar P. <br...@bc...>]

Hi,

Nice PHffARMACY http://www.ertionhunjasdefun.com

=20

drifted down to the ground, silently on null-gray drive. The door

[lcd4linux] =?iso-8859-1?q?Logitech=AE_G15_Gaming_Keyboard?=

[Steve-Kai V. <st...@vy...>]

Hello,

I'm thinking of getting me new keybord, and found the  Logitech=AE G15 Gami=
ng=20
Keyboard on the Net. Interesting is the LCD-Display on the Keybord. My=20
question is now, if it is Compatible with lcd4linux, so that it could be us=
ed=20
as Normal Display.

Thank you for any hints and infos

Steve

[lcd4linux] fwd: GSNH Closes Up Friday, After-Market News Release - acct Crystal Cooper

[Edgar G. <Bul...@gm...>]

pedestal optic

Up On the News - GSNH closes Up Friday, After-Market News Release - Get GSNH Quote Here. patti.
http://moneycentral.msn.com/detail/stock_quote?Symbol=gsnh

After weeks of speculation it's finally here, and the news is even bigger than we thought. treasonous.

We first knew something was up with GSNH when news came out Thursday regarding Drill LOMT #1. But GSNH really popped up on our radar with Friday's After-Market news. GSNH has announced its partners for the LOMT #1 sidetrack well and you are not going to believe who they are. amongst.

GSNH Names Partners for LOMT #1 Sidetrack Well hardy.
Friday October 27, 4:05 pm ET gill.
HOUSTON, Texas--(BUSINESS WIRE) - GSNH announces...has awarded drilling services for the LOMT #1 Sidetrack well to the following providers: candlewick
* Patterson-UTI (Nasdaq: PTEN), Revenue: 2.23 billion, UP 63.30% birdseed
* Schlumberger (NYSE: SLB), Revenue: 17.90 billion, UP 34.00% yankee
* Halliburton (NYSE: HAL), Revenue: 22.90 billion, UP 13.40% chargeable

Oct. 27, 2006 (BUSINESS WIRE) - GSNH Names Partners for Sidetrack Well... embryology
http://biz.yahoo.com/bw/061027/20061027005324.html?.v=1

GSNH has been releasing steady news worldwide, from Yahoo Finance, AOL, & MSN Money to Marketwatch & Bloomberg---even the NYSE & the NASDAQ have gotten in on the action. Exposure for GSNH is expansive. The increased frequency of news led us to believe that something big was coming for GSNH, and as usual, we were dead-on right. mew

Oct. 26, 2006 (BUSINESS WIRE) – GSNH to Drill LOMT #1... accentual.
http://money.aol.com/news/articles/_a/greater-sooner-holdings-inc-to-drill/n20061026162609990029

Oct. 12, 2006 (BUSINESS WIRE) – GSNH Reports Drilling Success... laugh.
http://www.marketwatch.com/News/Story/Story.aspx?guid={05206016-17D5-4077-B8A3-3D8A763487E2}&siteid=mktw&sid=2133723&symb=

Oct. 11, 2006 (BUSINESS WIRE) – GSNH Announces the Anthony 33... timid.
http://news.moneycentral.msn.com/ticker/article.asp?Feed=BW&Date=20061011&ID=6094112&Symbol=US:GSNH

Oct. 4, 2006 (BUSINESS WIRE) – GSNH...285 million in Probable Reserves... logic.
http://bloomberg.com/apps/news?pid=conewsstory&refer=conews&tkr=GSNH:US&sid=a6F2jO13PWCU

Friday's After-Market news on GSNH and its newfound partnership with these major corporations (over 43 billion in revenue combined) is just the beginning. We believe that there is even bigger news coming, and as always, we are bringing you the news ahead of time, ahead of everyone else, and ahead of a major spike in GSNH stock price.

berkshire beverly export