latex2rtf-users — usage of the latex to rtf converter

[Latex2rtf-users] transfer of latex2rtf project to github

[Wilfried H. <tex...@gm...>]

Hello everyone,

the latex2rtf project is now moved to GitHub (thanks to Mike Taves).

It is available at
https://github.com/latex2rtf/latex2rtf

I am going to delete the project from sourceforge at the end of year 2024.

Kind regards,
Wilfried

Re: [Latex2rtf-users] transfer of latex2rtf project to github

[Dominik W. <wuj...@gm...>]

Wilfred, thank you very, very much for latex2rtf.  It has gotten me out of
many tight corners.

I am relieved that it will live on at GitHub.  That's very important.  I
hope you've ticked "Preserve this repository" under Settings/Features.

Warm wishes,
Dominik


--
Professor Dominik Wujastyk
<https://apps.ualberta.ca/directory/person/wujastyk>
,

Singhmar Chair in Classical Indian Society and Polity
,

Department of History, Classics, and Religion
<http://historyandclassics.ualberta.ca/>
,
University of Alberta, Canada
.


South Asia at the UofA:

sas.ualberta.ca

SSHRC research: The Suśruta Project <http://sushrutaproject.org>

Journal: History of Science in South Asia <http://hssa-journal.org>


On Tue, 23 Jul 2024 at 20:28, Wilfried Hennings via Latex2rtf-users <
lat...@li...> wrote:

> Hello everyone,
> I am going to retire from the latex2rtf project.
>
> I am going to delete the project from sourceforge at the end of year
> 2024 (if not earlier) unless anyone takes over the administrator role.
>
> The project is also published on github and may be forked as you like,
> see https://github.com/wilfriedh/LaTeX2rtf
>
> Please inform me (by e-mail) if anything is missing in the github version.
>
> Kind regards,
> Wilfried
>
>
> _______________________________________________
> Latex2rtf-users mailing list
> Lat...@li...
> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
>

[Latex2rtf-users] transfer of latex2rtf project to github

[Wilfried H. <tex...@gm...>]

Hello everyone,
I am going to retire from the latex2rtf project.

I am going to delete the project from sourceforge at the end of year
2024 (if not earlier) unless anyone takes over the administrator role.

The project is also published on github and may be forked as you like,
see https://github.com/wilfriedh/LaTeX2rtf

Please inform me (by e-mail) if anything is missing in the github version.

Kind regards,
Wilfried

Re: [Latex2rtf-users] CHECK FOR EXISTING LATEX DISTRIBUTIONS

[Wilfried H. <tex...@gm...>]

Hello,

I am the one who prepares the packages on sourceforge.
The package which is offered on sourceforge for Linux only contains the
source files with a Makefile (and the sample test files), but no installer.

Probably you downloaded a package with installer from the distributor of
your Linux system or another package repository. I have no knowledge of
third party installers. You should contact the maker of the installer
package, who probably does not read this list.

Regards, Wilfried

At 06.11.2021 06:53 Izmirlian, Grant (NIH/NCI) [E] wrote via
Latex2rtf-users:
> Your installer did not find my texlive distribution in
> /usr/local/texlive/  and nearly broke my tex installation. I had to
> meticulously hand delete executables from /usr/bin
>
> Please fix your installer. Thank you.
>
> Grant Izmirlian
>
>
>
> _______________________________________________
> Latex2rtf-users mailing list
> Lat...@li...
> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
>

[Latex2rtf-users] CHECK FOR EXISTING LATEX DISTRIBUTIONS

[Izmirlian, G. (NIH/N. [E] <izm...@ma...>]

Your installer did not find my texlive distribution in /usr/local/texlive/  and nearly broke my tex installation. I had to meticulously hand delete executables from /usr/bin
Please fix your installer. Thank you.
Grant Izmirlian

Re: [Latex2rtf-users] latex2rtf

[Wilfried H. <tex...@gm...>]

Hello,

At 08.09.2021 15:59 Boris Moens wrote:
> Bonjour,
> J'ai téléchargé

from which source?

which file?

> votre logiciel permettant de convertir du latex vers
> rtf, cependant lorsque j'essaye d'initialiser son lancement,

Which type of computer? (PC, Mac, ...?)

Which operating system?

> je reçois
> un message de mon PC disant "Pour trouver une version pour votre PC,
> renseignez-vous auprès de l'éditeur du logiciel"
>
> Pourriez-vous m'aider?

maybe the downloaded version is for a different computer type or a
different operating system?

> Bien à vous,
>
> Moens Boris
>
>
> _______________________________________________
> Latex2rtf-users mailing list
> Lat...@li...
> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
>

[Latex2rtf-users] latex2rtf

[Boris M. <bor...@gm...>]

Bonjour,
J'ai téléchargé votre logiciel permettant de convertir du latex vers rtf,
cependant lorsque j'essaye d'initialiser son lancement, je reçois un
message de mon PC disant "Pour trouver une version pour votre PC,
renseignez-vous auprès de l'éditeur du logiciel"

Pourriez-vous m'aider?

Bien à vous,

Moens Boris

Re: [Latex2rtf-users] Purchasing the Program

[Wilfried H. <tex...@gm...>]

Hello,
please note that LaTeX2RTF is licensed and published under the GNU
General Public License (GPL).
It is and will remain open source under the GPL.
The source code as well as compiled packages are freely available.
The GPL allows you to distribute the software and/or offer support for
money, but the right of the original authors to distribute it for free
remains untouched, and any modification of the original code must be
published under the GPL.
Regards,
Wilfried Hennings
co-author of the LaTeX2RTF software



28.01.2021 19:25 Kate Harris wrote:
> Hello,
> My name is Kate Harris. My CTO wants to invest in prospective software
> in order to further improve promotion on the market.
> Therefore, I was interested in your program (LaTeX2RTF). We would like
> to acquire full rights to your program (with program code, client base,
> etc) not just license packs.
> Moreover, if you have other programs targeting the B2B market, please
> tell me. We will also ponder purchasing them.
> If you are interested in Our Offer We would discuss the details with
> great pleasure! Or with whom can I discuss this offer?
> Please, Contact me
>

[Latex2rtf-users] Purchasing the Program

[Kate H. <kat...@4g...>]

Hello,
My name is Kate Harris. My CTO wants to invest in prospective software 
in order to further improve promotion on the market.
Therefore, I was interested in your program (LaTeX2RTF). We would like 
to acquire full rights to your program (with program code, client base, 
etc) not just license packs.
Moreover, if you have other programs targeting the B2B market, please 
tell me. We will also ponder purchasing them.
If you are interested in Our Offer We would discuss the details with 
great pleasure! Or with whom can I discuss this offer?
Please, Contact me

-- 
Kate Harris
Assistant of CTO
4G NETWORKS
+1 718 701 8258 

Re: [Latex2rtf-users] ignore.cfg not working with figures and tables

[Wilfried H. <tex...@gm...>]

Hi Alvaro,
as far as I know: with respect to ignore.cfg the coding in latex2rtf is
broken. Lines in ignore.cfg have no effect.

My suggestion:
Use conditional parsing, as explained in the manual in chapter 5.2.
In short:

include the following line in the preamble of your document
(i.e., before \begin{document}):

\newif\iflatextortf

Then isolate the LaTeX commands which do not convert as follows:

\iflatextortf
This code is processed only by latex2rtf
\else
This code is processed only by latex
\fi

Regards, Wilfried

At 02.09.2020 21:54 Alvaro wrote:
> Dear latex2rtf users,
>
> My ignore.cfg file goes as follows:
>
> \figure,ENVIRONMENT.
> \tabular,ENVIRONMENT.
>
>
> I am working on latex2rtf 2.3.16 r1254 (released May 12 2017)
>
>
> Since my tables do not convert properly, I just want to ignore them.
> Any help is appreciated.
>
> Best regards,
>
> Alvaro
>
>
> _______________________________________________
> Latex2rtf-users mailing list
> Lat...@li...
> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
>

[Latex2rtf-users] ignore.cfg not working with figures and tables

[Alvaro <alv...@gm...>]

Dear latex2rtf users,

My ignore.cfg file goes as follows:

\figure,ENVIRONMENT.
\tabular,ENVIRONMENT.


I am working on latex2rtf 2.3.16 r1254 (released May 12 2017)


Since my tables do not convert properly, I just want to ignore them.
Any help is appreciated.

Best regards,

Alvaro

Re: [Latex2rtf-users] problem in converting pictures and graphs

[Michael F. <fri...@yo...>]

@ezeanosike : I've encountered this problem several times.  I have 
custom macros and environments
defined in LaTeX and was disappointed the latex2rtf doesn't handle them 
-- but it was never intended to do that.

Sometimes a latex-expander solution helps:

https://tex.stackexchange.com/questions/3174/latex-macro-expander

One other thing I've found useful for a complex, book document is to use 
`\newif\iflatextortf`

% support for conditional latex2rtf conversion
\newif\iflatextortf
\iflatextortf
         % only under latex2rtf
\else
         % normally
\fi


Hope this helps,
-Michael


On 4/26/2020 3:06 PM, Wilfried Hennings wrote:
> Hello,
>
> At 25.04.2020 18:59 Ezeanosike Obumneme wrote:
>> Hello all
>>
>> I am trying to convert a simple .tex file in a RTF file.
>> The text is properly converted. But I get this error message where there
>> are tables or pictures or graphs
>>
>> [Sorry. Ignored \begin{stlog} ... \end{stlog}]
>>
>> Figure 1:
>> [Sorry. Ignored \begin{stlog} ... \end{stlog}]
>
> Please note that latex2rtf can only convert a LIMITED SUBSET of LaTeX
> markup. Any unsupported markup is ignored by latex2rtf and will not be
> converted.
>
> The documentation tells you which LaTeX markup is supported.
> You should change the LaTeX source file so that it only contains
> supported markup.
>
>> Another error message within the script is
>> latex2png: error: convert (ImageMagick) failed to translate l2r_0004.eps
>> to l2r_0004.png
>
> This is a consequence of the failure to convert unsupported markup.
>
> Regards, Wilfried
>
>> Thank you
>>
>> -- 
>>
>> Ezeanosike Obumneme
>> Paediatrics & Neonatology. Clinical Trials. Pharmacology. Statistics.
>> Public Health.
>> eze...@gm... <mailto:eze...@gm...>
>> _______________________________________________
>> Latex2rtf-users mailing list
>> Lat...@li...
>> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
>
>
>
>
> _______________________________________________
> Latex2rtf-users mailing list
> Lat...@li...
> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users


-- 
Michael Friendly     Email: friendly AT yorku DOT ca
Professor, Psychology Dept. & Chair, ASA Statistical Graphics Section
York University      Voice: 416 736-2100 x66249 Fax: 416 736-5814
4700 Keele Street    Web:   http://www.datavis.ca  |  @datavisFriendly
Toronto, ONT  M3J 1P3 CANADA

Re: [Latex2rtf-users] problem in converting pictures and graphs

[Wilfried H. <tex...@gm...>]

Hello,

At 25.04.2020 18:59 Ezeanosike Obumneme wrote:
> Hello all
>
> I am trying to convert a simple .tex file in a RTF file.
> The text is properly converted. But I get this error message where there
> are tables or pictures or graphs
>
> [Sorry. Ignored \begin{stlog} ... \end{stlog}]
>
> Figure 1:
> [Sorry. Ignored \begin{stlog} ... \end{stlog}]

Please note that latex2rtf can only convert a LIMITED SUBSET of LaTeX
markup. Any unsupported markup is ignored by latex2rtf and will not be
converted.

The documentation tells you which LaTeX markup is supported.
You should change the LaTeX source file so that it only contains
supported markup.

> Another error message within the script is
> latex2png: error: convert (ImageMagick) failed to translate l2r_0004.eps
> to l2r_0004.png

This is a consequence of the failure to convert unsupported markup.

Regards, Wilfried

> Thank you
>
> --
>
> Ezeanosike Obumneme
> Paediatrics & Neonatology. Clinical Trials. Pharmacology. Statistics.
> Public Health.
> eze...@gm... <mailto:eze...@gm...>
> _______________________________________________
> Latex2rtf-users mailing list
> Lat...@li...
> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users

[Latex2rtf-users] problem in converting pictures and graphs

[Ezeanosike O. <eze...@gm...>]

Hello all



I am trying to convert a simple .tex file in a RTF file.
The text is properly converted. But I get this error message where there
are tables or pictures or graphs

[Sorry. Ignored \begin{stlog} ... \end{stlog}]

Figure 1:
[Sorry. Ignored \begin{stlog} ... \end{stlog}]





Another error message within the script is
latex2png: error: convert (ImageMagick) failed to translate l2r_0004.eps to
l2r_0004.png
Thank you





I will appreciate assistance.
Thank you
Obum

-- 
Ezeanosike Obumneme

Paediatrics & Neonatology. Clinical Trials. Pharmacology. Statistics.
Public Health.
eze...@gm...
<https://www.facebook.com/cloudHQ>
<https://www.linkedin.com/company/cloudhq>
<https://www.twitter.com/cloudHQ_net>
  Click to schedule a meeting
<https://www.cloudhq.net/meeting/dbdnwbKIaLGnXVBZ3q5>

Re: [Latex2rtf-users] equation bitmaps

[Jeff P. <jh...@cs...>]

Thanks for the quick reply.

Surprising, I found the problem with \verbatim sizing went away when I 
ensured that I had a full set of sections in the document I was 
testing.  I was working on part of the document and it started with 
\subsection.  When I added \chapter and section to it, then verbatim 
stopped overriding the size.  Since this seems odd, perhaps I changed 
something else, but I don't know what.

I still have the problem with spacing in the headers being overridden.  
I've looked for any commands specifying spacing and have not found any.  
I removed the package titlesec altogether and the problem persists.  
I'll try removing virtually every external package and see if I can find 
something  that relates to this.

In a similar vein, every figure seems to be proceeded by a figure 
paragraph (which is empty).  This creates some unexpected spacing before 
the figure and as with  the headings, the spacing is overridden on each 
figure.

{\pard\plain\s31\qc\sb120\sa0\keep\widctlpar\f0\fs24\sl240\slmult1 
\sb240 \fi0  \par

Another minor problem is that underscores (such as in variable names) 
are interpreted
oddly.  This problem can be removed by escaping the underscore.  In 
regular latex, you can define
underscore to only have special meaning in match mode which is 
convenient.  Is there a similar approach for latex2rtf?  In Latex I use:

\catcode`\_=12
\begingroup\lccode`~=`_\lowercase{\endgroup\let~\sb}
\mathcode`_="8000

One last question.  Does latex support a command that converts its 
argument to upper case?  \textsc provide small caps, but I couldn't find 
anything that created normal caps.

On 3/21/20 4:48 AM, Wilfried Hennings wrote:
> At 21.03.2020 04:07 Jeff Perkins wrote:
>> I am trying to use latex2rtf to convert a relatively complex document.
>> One thing I'd like to do is change the font size on some (or possibly
>> all) verbatim sections.
>>
>> I've found that I can specify a font size directly before
>> \begin{verbatim} and that will change the setting for the begin/end 
>> pair.
>>
>> I'd also like to be able to change the default definition so that I only
>> have to add all of that in unusual cases rather than in every case.  I
>> changed the definition of verbatim in style.cfg, but that definition
>> does not seem to get used as I would expect.  The rtf output appears to
>> overrides the specification.  I see in the RTF file:
>>
>> \pard\plain\s38\ql\widctlpar\f3\fs8\sl240\slmult1 \fi0 \fs22
>>
>> Where the fs8 is what I defined for verbatim, but actual size appears to
>> be overridden by the \fs22.  And that is what Word indicates as well in
>> its style pane.  It says: verbatim + 11pt
>>
>> Is there anyway to get it to simply use what is defined in the style
>> without overriding it?
>
> I found that the setting in the \documentclass command does NOT override
> the font set in style.cfg.
> But a font size command in the text -- like \small -- DOES override the
> size set in style.cfg.
> I don't know whether there are other commands which also change the font
> size.
>
>> Similar things happen for other items in the style guide. subsection is
>> defined as heading 3, but its  spacing before (sb) and its indentation
>> fi are overridden on each use.
>>
>> \pard\plain\s3\ql\sb240\sa120\keepn\f0\b\fs32\sl240\slmult1 \sb480 \fi0
>> 1.1  section test\par
>
> Does your document use the titlesec package
> and the command \titlespacing*{\subsection} ?
>
>
>> _______________________________________________
>> Latex2rtf-users mailing list
>> Lat...@li...
>> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
>>
>

Re: [Latex2rtf-users] equation bitmaps

[Wilfried H. <tex...@gm...>]

At 21.03.2020 04:07 Jeff Perkins wrote:
> I am trying to use latex2rtf to convert a relatively complex document.
> One thing I'd like to do is change the font size on some (or possibly
> all) verbatim sections.
>
> I've found that I can specify a font size directly before
> \begin{verbatim} and that will change the setting for the begin/end pair.
>
> I'd also like to be able to change the default definition so that I only
> have to add all of that in unusual cases rather than in every case.  I
> changed the definition of verbatim in style.cfg, but that definition
> does not seem to get used as I would expect.  The rtf output appears to
> overrides the specification.  I see in the RTF file:
>
> \pard\plain\s38\ql\widctlpar\f3\fs8\sl240\slmult1 \fi0 \fs22
>
> Where the fs8 is what I defined for verbatim, but actual size appears to
> be overridden by the \fs22.  And that is what Word indicates as well in
> its style pane.  It says: verbatim + 11pt
>
> Is there anyway to get it to simply use what is defined in the style
> without overriding it?

I found that the setting in the \documentclass command does NOT override
the font set in style.cfg.
But a font size command in the text -- like \small -- DOES override the
size set in style.cfg.
I don't know whether there are other commands which also change the font
size.

> Similar things happen for other items in the style guide. subsection is
> defined as heading 3, but its  spacing before (sb) and its indentation
> fi are overridden on each use.
>
> \pard\plain\s3\ql\sb240\sa120\keepn\f0\b\fs32\sl240\slmult1 \sb480 \fi0
> 1.1  section test\par

Does your document use the titlesec package
and the command \titlespacing*{\subsection} ?


> _______________________________________________
> Latex2rtf-users mailing list
> Lat...@li...
> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
>

Re: [Latex2rtf-users] equation bitmaps

[Wilfried H. <tex...@gm...>]

Hi Jeff,
thank you for the detailed and precise problem description.
I will try to reproduce this and look for a solution.
With regard to the font sizes: Does your document contain a global font
size command in the preamble? Without having tested this, this may cause
the effects you describe.
Kind regards, Wilfried

At 21.03.2020 04:07 Jeff Perkins wrote:
> I am trying to use latex2rtf to convert a relatively complex document.
> One thing I'd like to do is change the font size on some (or possibly
> all) verbatim sections.
>
> I've found that I can specify a font size directly before
> \begin{verbatim} and that will change the setting for the begin/end pair.
>
> I'd also like to be able to change the default definition so that I only
> have to add all of that in unusual cases rather than in every case.  I
> changed the definition of verbatim in style.cfg, but that definition
> does not seem to get used as I would expect.  The rtf output appears to
> overrides the specification.  I see in the RTF file:
>
> \pard\plain\s38\ql\widctlpar\f3\fs8\sl240\slmult1 \fi0 \fs22
>
> Where the fs8 is what I defined for verbatim, but actual size appears to
> be overridden by the \fs22.  And that is what Word indicates as well in
> its style pane.  It says: verbatim + 11pt
>
> Is there anyway to get it to simply use what is defined in the style
> without overriding it?
>
> Similar things happen for other items in the style guide. subsection is
> defined as heading 3, but its  spacing before (sb) and its indentation
> fi are overridden on each use.
>
> \pard\plain\s3\ql\sb240\sa120\keepn\f0\b\fs32\sl240\slmult1 \sb480 \fi0
> 1.1  section test\par
>
> I'm guessing that something in my document is setting these items, but I
> don't seem to be able to find it.  Seemingly the correct way is to make
> the appropriate latex changes to my .tex files so that latex2rtf creates
> the output I'm looking for, but being able to change the style settings
> as a way to accomplish this would be nice as well.
>
> Thanks for a very helpful tool!
>
> -jeff
>
>
>
> _______________________________________________
> Latex2rtf-users mailing list
> Lat...@li...
> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
>

[Latex2rtf-users] equation bitmaps

[Jeff P. <jh...@cs...>]

I am trying to use latex2rtf to convert a relatively complex document.  
One thing I'd like to do is change the font size on some (or possibly 
all) verbatim sections.

I've found that I can specify a font size directly before 
\begin{verbatim} and that will change the setting for the begin/end pair.

I'd also like to be able to change the default definition so that I only 
have to add all of that in unusual cases rather than in every case.  I 
changed the definition of verbatim in style.cfg, but that definition 
does not seem to get used as I would expect.  The rtf output appears to 
overrides the specification.  I see in the RTF file:

\pard\plain\s38\ql\widctlpar\f3\fs8\sl240\slmult1 \fi0 \fs22

Where the fs8 is what I defined for verbatim, but actual size appears to 
be overridden by the \fs22.  And that is what Word indicates as well in 
its style pane.  It says: verbatim + 11pt

Is there anyway to get it to simply use what is defined in the style 
without overriding it?

Similar things happen for other items in the style guide. subsection is 
defined as heading 3, but its  spacing before (sb) and its indentation 
fi are overridden on each use.

\pard\plain\s3\ql\sb240\sa120\keepn\f0\b\fs32\sl240\slmult1 \sb480 \fi0 
1.1  section test\par

I'm guessing that something in my document is setting these items, but I 
don't seem to be able to find it.  Seemingly the correct way is to make 
the appropriate latex changes to my .tex files so that latex2rtf creates 
the output I'm looking for, but being able to change the style settings 
as a way to accomplish this would be nice as well.

Thanks for a very helpful tool!

-jeff

Re: [Latex2rtf-users] latex2rtf errors

[Wilfried H. <tex...@gm...>]

Hello,
does your LaTeX file compile successfully with LaTeX?
If not, latex2rtf will most probably fail, too.
If yes, be aware that latex2rtf can only convert a rather limited subset
of LaTeX commands and environments.

As the last message sais, latex2rtf could not find the \end{appendices}
command. Are you sure that your document does contain this command?

Apart from this, without testing with the original LaTeX files myself I
cannot say what the problem is.

Regards, Wilfried

At 18.11.2019 07:41 SALEM HAMOUD SALEM ALGHARBI wrote:
> Greeting Dears … thanks for this great application … it is really good one.
>
> Unfortunately I am new to Latex … and when I tried to run your
> application on my Latex files … I got below error … any clue what is the
> problem?
>
> Thanks in advance for your support
>
> *Salem H. AlGharbi*| PhD Student
>
> KFUPM | The College of Petroleum Engineering & Geosciences (CPG) |
> Department Of Petroleum Engineering
>
>
>
> _______________________________________________
> Latex2rtf-users mailing list
> Lat...@li...
> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
>

[Latex2rtf-users] latex2rtf errors

[SALEM H. S. A. <g19...@kf...>]

Greeting Dears ... thanks for this great application ... it is really good one.

Unfortunately I am new to Latex ... and when I tried to run your application on my Latex files ... I got below error ... any clue what is the problem?

Thanks in advance for your support

[cid:image001.jpg@01D59DF4.50CCFC90]

Salem H. AlGharbi | PhD Student
KFUPM | The College of Petroleum Engineering & Geosciences (CPG) | Department Of Petroleum Engineering

Re: [Latex2rtf-users] Conversion of quote environments

[Wilfried H. <tex...@gm...>]

Hello! 
Excuse me for the delayed reply, I was busy with other tasks. 
This may be possible, I'll have a look at it as at your other questions, but not before Thursday. 
Regards and Happy Easter
Wilfried

Am 21. April 2019 19:34:18 MESZ schrieb Michael Friendly <fri...@yo...>:
>In a LaTeX book, I have many `\begin{quote} ... \end{quote}` 
>environments.  In the conversion to RTF, I'd like them to appear in 
>Word/RTF `Quote` style so that all appearances can be changed globally,
>
>e.g., in italics or a smaller font without indentations, etc.
>
>But in the converted result, all quotations appear in *Normal style*, 
>with L/R indentation and in the normal font.  This means that any
>change 
>to the style would have to be done manually for each one.
>
>Is there any way for me to change this?  In `cfg/style.cfg` I do see:
>
>quote, 
>0,0,\s35\qj\li1024\ri1024\fi340\widctlpar\f*Roman*\fs*CurrentFontSize*,\sbasedon0\snext35
>
>Quote.
>
>but that doesn't seem to have any effect, AFAICS, i.e., quotes do not 
>get a Quote style.  Or, is this just a limitation of RTF & I should
>just 
>suck-it-up?
>
>Thanks again to all the people working on LaTeX2rtf!
>
>-Michael
>
>
>-- 
>Michael Friendly     Email: friendly AT yorku DOT ca
>Professor, Psychology Dept. & Chair, ASA Statistical Graphics Section
>York University      Voice: 416 736-2100 x66249
>4700 Keele Street    Web: http://www.datavis.ca | @datavisFriendly
>Toronto, ONT  M3J 1P3 CANADA

-- 
Wilfried Hennings

[Latex2rtf-users] Conversion of quote environments

[Michael F. <fri...@yo...>]

In a LaTeX book, I have many `\begin{quote} ... \end{quote}` 
environments.  In the conversion to RTF, I'd like them to appear in 
Word/RTF `Quote` style so that all appearances can be changed globally, 
e.g., in italics or a smaller font without indentations, etc.

But in the converted result, all quotations appear in *Normal style*, 
with L/R indentation and in the normal font.  This means that any change 
to the style would have to be done manually for each one.

Is there any way for me to change this?  In `cfg/style.cfg` I do see:

quote, 
0,0,\s35\qj\li1024\ri1024\fi340\widctlpar\f*Roman*\fs*CurrentFontSize*,\sbasedon0\snext35 
Quote.

but that doesn't seem to have any effect, AFAICS, i.e., quotes do not 
get a Quote style.  Or, is this just a limitation of RTF & I should just 
suck-it-up?

Thanks again to all the people working on LaTeX2rtf!

-Michael


-- 
Michael Friendly     Email: friendly AT yorku DOT ca
Professor, Psychology Dept. & Chair, ASA Statistical Graphics Section
York University      Voice: 416 736-2100 x66249
4700 Keele Street    Web: http://www.datavis.ca | @datavisFriendly
Toronto, ONT  M3J 1P3 CANADA

Re: [Latex2rtf-users] endnotes need better support: \arabic vs. \roman

[Michael F. <fri...@yo...>]

Yes, thank you for this suggestion.
This works, though I was hoping to minimize the number of manual 
re-formatting steps.
-Michael

On 4/14/2019 1:49 PM, Neil Siegel wrote:
> Michael — Can’t you adjust this fomatting detail from within Word?   
> If they ended up as endnotes recognized as such by Word, that ought to 
> be easy.
>
> Neil
>
>
> On Sun, Apr 14, 2019 at 8:31 AM Michael Friendly <fri...@yo... 
> <mailto:fri...@yo...>> wrote:
>
>     I figured out how to map all \footnote to \endnote as required by my
>     publisher, using the following conditional code for the latex2rtf
>     conversion.
>
>     % footnotes & endnotes
>     \iflatextortf
>     \usepackage{endnotes}
>     \renewcommand{\theendnote}{\arabic{endnote}}
>     \let\footnote=\endnote
>     \newcommand{\FN}[1]{{\endnote{#1}}}
>     \else
>     \newcommand{\FN}[1]{{\footnote{\color{blue}#1}}}
>     \input{inputs/endnotes}
>     \fi
>
>     Yet, all endnotes appear with roman numerals, like ^{cxxxvii},
>     numbered
>     throughout the book.  The latex2rtf.log file notes:
>
>     TOGS.tex:18  Incomplete support for package/option 'endnotes'
>
>     But this is a deal breaker -- I cannot use latex2rtf for my
>     purpose.  Is
>     it possible at least  to support a style or option to allow arabic
>     numbers for endnotes?
>
>     thanks,
>
>     -Michael
>
>
>     -- 
>     Michael Friendly     Email: friendly AT yorku DOT ca
>     Professor, Psychology Dept. & Chair, ASA Statistical Graphics Section
>     York University      Voice: 416 736-2100 x66249
>     4700 Keele Street    Web: http://www.datavis.ca | @datavisFriendly
>     Toronto, ONT  M3J 1P3 CANADA
>
>
>
>     _______________________________________________
>     Latex2rtf-users mailing list
>     Lat...@li...
>     <mailto:Lat...@li...>
>     https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
>
> -- 
> sie...@gm... <mailto:sie...@gm...>.


-- 
Michael Friendly     Email: friendly AT yorku DOT ca
Professor, Psychology Dept. & Chair, ASA Statistical Graphics Section
York University      Voice: 416 736-2100 x66249
4700 Keele Street    Web: http://www.datavis.ca | @datavisFriendly
Toronto, ONT  M3J 1P3 CANADA

Re: [Latex2rtf-users] endnotes need better support: \arabic vs. \roman

[Neil S. <sie...@gm...>]

Michael — Can’t you adjust this fomatting detail from within Word?   If
they ended up as endnotes recognized as such by Word, that ought to be
easy.

Neil


On Sun, Apr 14, 2019 at 8:31 AM Michael Friendly <fri...@yo...> wrote:

> I figured out how to map all \footnote to \endnote as required by my
> publisher, using the following conditional code for the latex2rtf
> conversion.
>
> % footnotes & endnotes
> \iflatextortf
> \usepackage{endnotes}
> \renewcommand{\theendnote}{\arabic{endnote}}
> \let\footnote=\endnote
> \newcommand{\FN}[1]{{\endnote{#1}}}
> \else
> \newcommand{\FN}[1]{{\footnote{\color{blue}#1}}}
> \input{inputs/endnotes}
> \fi
>
> Yet, all endnotes appear with roman numerals, like ^{cxxxvii}, numbered
> throughout the book.  The latex2rtf.log file notes:
>
> TOGS.tex:18  Incomplete support for package/option 'endnotes'
>
> But this is a deal breaker -- I cannot use latex2rtf for my purpose.  Is
> it possible at least  to support a style or option to allow arabic
> numbers for endnotes?
>
> thanks,
>
> -Michael
>
>
> --
> Michael Friendly     Email: friendly AT yorku DOT ca
> Professor, Psychology Dept. & Chair, ASA Statistical Graphics Section
> York University      Voice: 416 736-2100 x66249
> 4700 Keele Street    Web: http://www.datavis.ca | @datavisFriendly
> Toronto, ONT  M3J 1P3 CANADA
>
>
>
> _______________________________________________
> Latex2rtf-users mailing list
> Lat...@li...
> https://lists.sourceforge.net/lists/listinfo/latex2rtf-users
>
-- 
sie...@gm....

[Latex2rtf-users] endnotes need better support: \arabic vs. \roman

[Michael F. <fri...@yo...>]

I figured out how to map all \footnote to \endnote as required by my 
publisher, using the following conditional code for the latex2rtf 
conversion.

% footnotes & endnotes
\iflatextortf
\usepackage{endnotes}
\renewcommand{\theendnote}{\arabic{endnote}}
\let\footnote=\endnote
\newcommand{\FN}[1]{{\endnote{#1}}}
\else
\newcommand{\FN}[1]{{\footnote{\color{blue}#1}}}
\input{inputs/endnotes}
\fi

Yet, all endnotes appear with roman numerals, like ^{cxxxvii}, numbered 
throughout the book.  The latex2rtf.log file notes:

TOGS.tex:18  Incomplete support for package/option 'endnotes'

But this is a deal breaker -- I cannot use latex2rtf for my purpose.  Is 
it possible at least  to support a style or option to allow arabic 
numbers for endnotes?

thanks,

-Michael


-- 
Michael Friendly     Email: friendly AT yorku DOT ca
Professor, Psychology Dept. & Chair, ASA Statistical Graphics Section
York University      Voice: 416 736-2100 x66249
4700 Keele Street    Web: http://www.datavis.ca | @datavisFriendly
Toronto, ONT  M3J 1P3 CANADA