#82 Failure when setting filters for J1850VPW.

[Kevin Stofflet]

V13.00.00 - Generates a filter size error when
starting the message filters for J1850VPW. (Minimum
size is three, J1699-3 uses two.)

******
Partial Log File
******

+000010ms INFORMATION: Wed Feb 01 10:06:34 2006

+000000ms INFORMATION: **** LOG FILENAME 2005-Nissian-
Sentra-1.log ****
+000010ms INFORMATION: **** SAE J1699-3 Revision
13.00.00 (Buid Date: Jan 24 2006) ****

+000000ms INFORMATION: **** NOTE: Timestamp on left is
from the PC ****
+000000ms INFORMATION: **** NOTE: Timestamp with
messages is from the J2534 interface ****

+000010ms INFORMATION: Windows NT/2K/XP (08930005)
+5026928ms INFORMATION: Device = CarDAQ
+000000ms INFORMATION: ProtocolsSupported =
CAN,ISO9141,ISO14230,ISO15765,J1850VPW,J1850PWM,
+000000ms INFORMATION: Device = CarDAQ PLUS
+000000ms INFORMATION: ProtocolsSupported =
CAN,ISO9141,ISO14230,ISO15765,J1850VPW,J1850PWM,
+000000ms PROMPT: Select tool from following list:

+000010ms 1 CarDAQ (C:\WINNT\SYSTEM32\CARDA432.DLL)
+000000ms 2 CarDAQ PLUS (C:\WINNT\SYSTEM32
\CDPLS432.DLL)
+000000ms Enter device number (1-2): +015622ms 2
+000000ms INFORMATION: Loading C:\WINNT\SYSTEM32
\CDPLS432.DLL library

+000000ms INFORMATION: How many OBD-II ECUs are on
this vehicle (1 to 8)? 1
+000000ms INFORMATION: How many reprogrammable, OBD-II
ECUs are on this vehicle (1 to 8)? 1
+000010ms INFORMATION: Does the vehicle use
compression ignition (i.e. diesel)? NO
+000000ms INFORMATION: Is this a hybrid vehicle? NO
+000000ms INFORMATION: Is this an engineering test
(i.e. ignore protocol errors)? YES
PROMPT: Enter your name and/or contact information
(optional) (Press Enter): Brink
+002464ms **** Test 5.1 (No DTC set) ****
PROMPT: Turn key OFF for at least thirty (30) seconds
(Press Enter):
PROMPT: Turn key ON with engine OFF. Do not crank
engine.
(Press Enter):
PROMPT: Was the MIL ON for at least fifteen (15)
seconds? (Enter Yes or No): yes
+006980ms **** Test 5.1 PASSED ****
+000000ms **** Test 5.2 ****
+000010ms INFORMATION: Checking for OBD on J1850PWM
protocol
FAILURE: pMaskMsg DataSize (2) out of range (3-12)
type 1 (PassThruStartMsgFilter returned 10)
+000020ms INFORMATION: Checking for OBD on J1850VPW
protocol
+000100ms REQ MSG: J1850VPW 68 6A F1 01 00
+000010ms TX MSG: 25540688usec J1850VPW 68 6A F1 01
00
+000531ms INFORMATION: Checking for OBD on ISO9141
protocol
+002844ms INFORMATION: Keyword 1 = 08, Keyword 2 = 08
+000331ms REQ MSG: ISO9141 68 6A F1 01 00
+000000ms TX MSG: 29252254usec ISO9141 68 6A F1 01
00
+000030ms RX MSG: 29284549usec ISO9141 Start of
Message
+000120ms RX MSG: 29377404usec ISO9141 48 6B 10 41
00 BE 1F B8 11
+000000ms EOM: 29252254 usec, +000000ms SOM: 29284549
usec, +000000ms DELTA: 32295 usec
+000270ms INFORMATION: 1 OBD ECU(s) found
+000000ms INFORMATION: OBD on ISO9141 protocol detected
+005017ms INFORMATION: Checking for OBD on ISO14230
Fast Init protocol
+006019ms INFORMATION: Checking for OBD on ISO14230
protocol
+002754ms INFORMATION: Keyword 1 = 08, Keyword 2 = 08
+000330ms REQ MSG: ISO14230 C2 33 F1 01 00
+000000ms TX MSG: 43793554usec ISO14230 C2 33 F1 01
00
+005288ms INFORMATION: Checking for OBD on ISO15765
protocol
+000100ms REQ MSG: ISO15765 00 00 07 DF 01 00
+000000ms TX MSG: 49177271usec ISO15765
+000000ms TX MSG: 49177271usec ISO15765 00 00 07 DF
01 00
+000271ms INFORMATION: Checking for OBD on ISO15765 29
Bit protocol
+000080ms REQ MSG: ISO15765 18 DB 33 F1 01 00
+000000ms TX MSG: 49527271usec ISO15765
+000000ms TX MSG: 49527271usec ISO15765 18 DB 33 F1
01 00
+003104ms INFORMATION: Keyword 1 = 08, Keyword 2 = 08
+000000ms INFORMATION: Firmware Version: 01.08.01
CarDAQ+ Serial#: 38 (CARDAQ-38)
+000000ms INFORMATION: DLL Version: 01.08.01 CarDAQ+
J2534 Windows DLL
+000010ms INFORMATION: API Version: 04.04
+000000ms INFORMATION: Battery = 12.293V
+000000ms **** Test 5.2 PASSED ****

[Kevin Stofflet]

Logged In: YES
user_id=809541

Fixed in revision 13.00.01, dated 2/20/06.