IPMI Util 3.17 still not working on windows with remote requests (lan2)

Manage and interpret IPMI systems with common a software tool

Brought to you by: arcress, gdicaire, kbanks, lapointep, thibaulf88

IPMI Util 3.17 still not working on windows with remote requests (lan2)

Forum: Help

Creator: Patrick Schmidt

Created: 2021-01-12

Updated: 2021-06-07

<< < 1 2 (Page 2 of 2)

Patrick Schmidt - 2021-04-09

Thanks for the update :) I am looking forward to 3.1.2!

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Andy Cress - 2021-04-13

I built this one with just ipmiutil-3.1.2, and from previous discussions, that release didn't have any lanplus issues, so please see if that works for you. http://ipmiutil.sourceforge.net/FILES/ipmiutil312.zip

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Patrick Schmidt - 2021-04-14

I will try that out and report :) Thank you!

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Patrick Schmidt - 2021-04-19

So like you can see , the error must lie somewhere else, as i got the same error with the 3.1.2a version you send!

sensor.txt

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Patrick Schmidt - 2021-04-19

Sorry attached the wrong txt :)

sensor312.txt

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Andy Cress - 2021-04-19

That confirms that the error is in the openssl code, so I do need to rebuild/modify that.
For several of these, you were able to do lanplus previously with ipmiutil-3.1.2. Is this one of those, or has this one never worked?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Patrick Schmidt - 2021-04-20

"you were able to do lanplus previously with ipmiutil-3.1.2
Yes, i downloaded all releases from your sites .The ipmiutil 3.1.2 release (64bit windows), found underIPMIUTIL FILES, has always worked for me ( and older versions ). Just the newer once since 3.1.3 were not working!

Last edit: Patrick Schmidt 2021-04-20

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Patrick Schmidt - 2021-05-10

Do you have any update for me on this? :)

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Andy Cress - 2021-05-10

Sorry not yet. I have been consumed with my day job. Planning for time to get it done this week.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Patrick Schmidt - 2021-05-11

Thank you for the fast answer :) Of course i fully understand that!

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Andy Cress - 2021-06-03

Finally I got a fresh clean build of openssl 64bit and this should either run clean or give better debug. http://ipmiutil.sourceforge.net/FILES/ipmiutil-317q.zip (ipmiutil-317q64.exe and *eay32.dll)

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Patrick Schmidt - 2021-06-07

Thank you :) Will try this out :)

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Patrick Schmidt - 2021-06-07

It has worked!! Thanks Andy for fixing this :)

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

<< < 1 2 (Page 2 of 2)

Log in to post a comment.