ids-devel — IDS developers use this list

Re: [Ids-devel] Appropriate or no?

[Ashley M. K. <as...@pc...>]

David Smith wrote:

> Is this an appropriate place for an IDS user to post bug reports and/or
> support questions?

    You're at the right spot!

--
W | I haven't lost my mind; it's backed up on tape somewhere.
  +--------------------------------------------------------------------
  Ashley M. Kirchner <mailto:as...@pc...>   .   303.442.6410 x130
  IT Director / SysAdmin / WebSmith             .     800.441.3873 x130
  Photo Craft Laboratories, Inc.            .     3550 Arapahoe Ave. #6
  http://www.pcraft.com ..... .  .    .       Boulder, CO 80303, U.S.A.

[Ids-devel] Appropriate or no?

[David S. <ds...@my...>]

Is this an appropriate place for an IDS user to post bug reports and/or
support questions?

If not is there a better place?

Thanks,
Dave

Fwd: Re[2]: [Ids-devel] error on install?

[Listen <Li...@cy...>]

Thanks for your input.  However, I double checked and all NTFS
permissions are wide open (I am logged onto the server as
admin)--everyone can read/write/execute. I also set the virtual
directories and permissions according to the instructions on the site.

As per below, the line in idsShared.pm that chokes is 449:
the line in question
        open (LANG,"$localizationFile") || bail ("can't open localization file
        \"$localizationFile\": ($!)");

However, I can navigate via browser to
webhosting.cypressintegrated.com/ids/localizations/English.txt

Also, FTR I am using an ActiveState Build and I was wrong about Image Magick, it
is v5.49.

One thing I did notice however, was that iiscfg.pl which I ran on
install, didn't seem to do everything it is supposed to (for instance
it didnt "virtualize" the postcomment dir) however I set these
parameters manually, following the instructions on the website.

I see there is a debug parameter in iiscfg.pl. Should I run it again
with debug on?

Thanks.

Brian Donnelly



TK> Line 449 in idsShared is a write to a log file. You might have a problem
TK> with NTFS permissions. Permissions may also be the culprit in the rename
TK> problem.

TK> Also, you state that you are running ImageMagick 1.10. Image Magick is now
TK> somewhere around 5.5, so you may want to make sure that you are running a
TK> current version. I know I have had luck with 5.45 for some time, so I'm
TK> actually out of date... You also do not mention what build of perl you are
TK> running, I recommend the ActiveState builds.

TK> Hope this helps!

TK> Tom Keegan


TK> ----- Original Message -----
TK> From: "Listen" <Li...@cy...>
TK> To: <ids...@li...>
TK> Sent: Tuesday, October 15, 2002 5:10 PM
TK> Subject: [Ids-devel] error on install?


>>
>> I just installed IDS on Win2K (IIS5)
>>  and when I go to  webhosting.cypressintegrated.com/ids/
>>  I get the following error:
>>
>>  "Can't call method "self_url" on an
>>  undefined value at
>>  D:\inetpub\webhosting.cypressintegrated.com\ids/idsShared.pm line 449. "
>>
>> I have tested test_magick.pl and test.pl and they seem to be working.
>>
>> ids/admin seems to work--however: I can create new albums, change name
>> of existing albums, etc.
>>
>> But if I try to rename an image I get:
>> "IDS\admin\index.cgi: Exception 410: Reference
>> is not my type (Image::Magick) at ../idsShared.pm line 641."
>>
>> Hope I am not missing something too obvious.
>> Other environment variables:
>> PERL 5.6.1
>> Image_Magick  1.10
>> Image Info 1.10
>>
>> Any clues would be greatly appreciated.
>>
>> Brian Donnelly
>> Cypress Integrated
>>  mailto:Li...@cy...

Re: [Ids-devel] error on install?

[Thomas K. <tk...@us...>]

Line 449 in idsShared is a write to a log file. You might have a problem
with NTFS permissions. Permissions may also be the culprit in the rename
problem.

Also, you state that you are running ImageMagick 1.10. Image Magick is now
somewhere around 5.5, so you may want to make sure that you are running a
current version. I know I have had luck with 5.45 for some time, so I'm
actually out of date... You also do not mention what build of perl you are
running, I recommend the ActiveState builds.

Hope this helps!

Tom Keegan


----- Original Message -----
From: "Listen" <Li...@cy...>
To: <ids...@li...>
Sent: Tuesday, October 15, 2002 5:10 PM
Subject: [Ids-devel] error on install?


>
> I just installed IDS on Win2K (IIS5)
>  and when I go to  webhosting.cypressintegrated.com/ids/
>  I get the following error:
>
>  "Can't call method "self_url" on an
>  undefined value at
>  D:\inetpub\webhosting.cypressintegrated.com\ids/idsShared.pm line 449. "
>
> I have tested test_magick.pl and test.pl and they seem to be working.
>
> ids/admin seems to work--however: I can create new albums, change name
> of existing albums, etc.
>
> But if I try to rename an image I get:
> "IDS\admin\index.cgi: Exception 410: Reference
> is not my type (Image::Magick) at ../idsShared.pm line 641."
>
> Hope I am not missing something too obvious.
> Other environment variables:
> PERL 5.6.1
> Image_Magick  1.10
> Image Info 1.10
>
> Any clues would be greatly appreciated.
>
> Brian Donnelly
> Cypress Integrated
>  mailto:Li...@cy...
>
>
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by: viaVerio will pay you up to
> $1,000 for every account that you consolidate with us.
> http://ad.doubleclick.net/clk;4749864;7604308;v?http://www.viaverio.com/
> consolidator/osdn.cfm
>
>
> _______________________________________________
> IDS-devel mailing list
> IDS...@li...
> https://lists.sourceforge.net/lists/listinfo/ids-devel
>

[Ids-devel] error on install?

[Listen <Li...@cy...>]

I just installed IDS on Win2K (IIS5)
 and when I go to  webhosting.cypressintegrated.com/ids/
 I get the following error:

 "Can't call method "self_url" on an
 undefined value at
 D:\inetpub\webhosting.cypressintegrated.com\ids/idsShared.pm line 449. "

I have tested test_magick.pl and test.pl and they seem to be working.

ids/admin seems to work--however: I can create new albums, change name
of existing albums, etc.

But if I try to rename an image I get:
"IDS\admin\index.cgi: Exception 410: Reference
is not my type (Image::Magick) at ../idsShared.pm line 641."

Hope I am not missing something too obvious.
Other environment variables:
PERL 5.6.1
Image_Magick  1.10
Image Info 1.10

Any clues would be greatly appreciated.

Brian Donnelly
Cypress Integrated
 mailto:Li...@cy...

Re: [Ids-devel] Template variables

[Anthony A. D. T. <aa...@ve...>]

> template engine and CPAN and most Linux distributions make installation a
> no-brainer.

Silly me, I thought this list was for IDS, not Linux.

Re: [Ids-devel] Template variables

[Ashley M. K. <as...@pc...>]

Jacob Elder wrote:

> I'm writing a new theme to intergrate IDS into my home page. Is there a
> document somewhere that describes the 40 or so template variables?

    To my knowledge, no.  You're welcome to write one though.  I'll stick it in
the next release.

--
W | I haven't lost my mind; it's backed up on tape somewhere.
  +--------------------------------------------------------------------
  Ashley M. Kirchner <mailto:as...@pc...>   .   303.442.6410 x130
  IT Director / SysAdmin / WebSmith             .     800.441.3873 x130
  Photo Craft Laboratories, Inc.            .     3550 Arapahoe Ave. #6
  http://www.pcraft.com ..... .  .    .       Boulder, CO 80303, U.S.A.

Re: [Ids-devel] Template variables

[Jeff D. <je...@ba...>]

> BTW, any chance of using HTML::Template in a future version? From the list
> archives it looks like you folks abhor dependencies, but it's a great
> template engine and CPAN and most Linux distributions make installation a
> no-brainer.

    I'm not a HTML::Template fan due to experiencing serious, reproduceable
memory leaks while using it under perl 5.5 .


Jeff

[Ids-devel] Template variables

[<ja...@lu...>]

I'm writing a new theme to intergrate IDS into my home page. Is there a
document somewhere that describes the 40 or so template variables?

BTW, any chance of using HTML::Template in a future version? From the list
archives it looks like you folks abhor dependencies, but it's a great
template engine and CPAN and most Linux distributions make installation a
no-brainer.

-- 
Jacob Elder
http://www.lucidpark.net/

[Ids-devel] Re: ImageMagick errors...

[Mark H. <mar...@ho...>]

FYI, I've found a work around for this problem.  Under IDS album
preferences, I turned off "Display 'thumbnail' corner icon?".  This causes
line 641 not to be executed to try and combine the image with the icon,
so everything works.

Hopefully this will be helpful to someone else who might come across this
problem.

Cheers,
- Mark

On Fri, Sep 20, 2002 at 02:57:02PM -0400,  wrote:
>Hi,
>
>I'm getting the following error whenever I try to do certain things
>in IDS:
>
>[Fri Sep 20 14:08:42 2002] index.cgi: Exception 410: Reference is not my type (Image::Magick) at ../idsShared.pm line 641.
>
>I've tried this using ids 0.8, 0.81 & 0.82.  All produce the same error.
>
>I'm using imagemagick w/perlmagick 5.4.9.1
>
>Is there a particular version that I ought to be using?
>Thanks,
>- Mark

[Ids-devel] my album using ids

[happyman <hap...@co...>]

Dear all,

    Please visit my album and add it to example site.=20
http://photos.happyman.idv.tw/
I am the fan of ids since version 0.71.=20
I did some modification to 0.82 , to use fastcgi=20
and make big5 charset work.

regs,  =20
Eric Chiu

[Ids-devel] ImageMagick errors...

[Mark H. <mar...@ho...>]

Hi,

I'm getting the following error whenever I try to do certain things
in IDS:

[Fri Sep 20 14:08:42 2002] index.cgi: Exception 410: Reference is not my type (Image::Magick) at ../idsShared.pm line 641.

I've tried this using ids 0.8, 0.81 & 0.82.  All produce the same error.

I'm using imagemagick w/perlmagick 5.4.9.1

Is there a particular version that I ought to be using?
Thanks,
- Mark

[Ids-devel] RE: IDS - Huge statsfile

[Kevin R. P. <kp...@ya...>]

OK, silly me.  I turned off stats collection and the file has stopped growing.  Didn't notice
the configurable variable before.  Anyway...shouldn't it have a throttle?

Thanks,
-krp

_____________________________

Any idea why my album-data/statsfile is growing so large?  The performance of IDS had been
getting worse and worse, by today it was taking about 2 minutes to display an album.  I tracked
it down to the 20mb statsfile.  Moved it to statsfile.old and IDS created a new one and
performance is snappy again... but that too is slowly growing.  It looks to contain tons of
duplicate entries

rage% pwd
/home/apache/cgi-bin/ids/album-data
rage% ls -la | grep stat
-rw-r--r--   1 nobody   nobody      2056 Sep 11 08:58 statsfile
-rw-r--r--   1 nobody   nobody   20643844 Sep 11 07:22 statsfile.old

I should note that I had switched to using mod_perl for a bit, but have switched back while
trying to find the performance problem.

TIA,
-krp

__________________________________________________
Yahoo! - We Remember
9-11: A tribute to the more than 3,000 lives lost
http://dir.remember.yahoo.com/tribute

[Ids-devel] IDS - Huge statsfile

[Kevin R. P. <kp...@ya...>]

Any idea why my album-data/statsfile is growing so large?  The performance of IDS had been
getting worse and worse, by today it was taking about 2 minutes to display an album.  I tracked
it down to the 20mb statsfile.  Moved it to statsfile.old and IDS created a new one and
performance is snappy again... but that too is slowly growing.  It looks to contain tons of
duplicate entries

rage% pwd
/home/apache/cgi-bin/ids/album-data
rage% ls -la | grep stat
-rw-r--r--   1 nobody   nobody      2056 Sep 11 08:58 statsfile
-rw-r--r--   1 nobody   nobody   20643844 Sep 11 07:22 statsfile.old

I should note that I had switched to using mod_perl for a bit, but have switched back while
trying to find the performance problem.

TIA,
-krp

__________________________________________________
Yahoo! - We Remember
9-11: A tribute to the more than 3,000 lives lost
http://dir.remember.yahoo.com/tribute

[Ids-devel] Finnish translation for IDS.

[Hans L. <hle...@at...>]

Hello,

Below is the finnish translation file (finnish.txt) for IDS. It's done by a
guy named Sami Köykkä, who helped me a lot when istalling IDS. Hope this is
indluded in the next release of this great software!

(well I am not sure how the nordic special alphabets (a and o with dots)
show here... hope they are ok)


# Finnish localization for IDS
# 27.12.2001  Sami Köykkä (sa...@ik...)
#
#   format-
#       valuename:"value"



# Site-wide
site-language:"fi-FI"
site-encoding:"iso-8859-1"
site-footer:"Sivu generoitu %date kello %time ohjelmalla %version."
site-searchButton:"Etsi"

# Home page
home-albumLabel:"albumit"
home-newsLabel:"uutiset"
home-commentLink:"Katso uusimmat kommentit..."

# Album page
album-sortName:"Aakkosjärjestyksessä"
album-sortDate:"Aikajärjestyksessä"
album-sortSize:"Kokojärjestyksessä"
album-sortIntelligent:"Nimijärjestyksessä"
album-sortButton:"Järjestä"
album-itemCount:"näkyvissä kuvat %firstItem-%lastItem (kuvia kaikkiaan
%totalItems)"
album-noItems:"ei löytynyt yhtään"
album-oneItem:"1 kpl"
album-pageNumber:"sivu %pageNumber"
album-hasComments:" sisältää kuvatekstin"
album-mainPageLink:"Albumit"
album-previousAlbumLink:"edellinen albumi"

# Image page
image-backToAlbum:"takaisin albumiin"
image-previousImage:"Edellinen"
image-nextImage:"Seuraava"
image-imageSizeTiny:"minikokoinen"
image-imageSizeSmall:"pieni"
image-imageSizeMedium:"keskikokoinen"
image-imageSizeLarge:"suuri"
image-imageSizeXLarge:"extrasuuri"
image-imageSizeOriginal:"alkuperäinen"
image-imageSizeButton:"Muuta kokoa"
image-infoType:"Kuvan tyyppi"
image-infoFileSize:"Tiedoston koko"
image-infoImageSize:"Kuvan koko (maksimi)"
image-infoUploaded:"Tallennettu albumiin"
image-infoUploaded1:"%days päivää sitten"
image-infoUploaded2:"tänään"
image-infoCameraMake:"Kameran merkki"
image-infoCameraModel:"Kameran malli"
image-infoFlash:"Käytettiinkö salamaa"
image-infoDate:"Otettu"
image-infoISO:"Filmiherkkyys (ISO)"
image-infoFocalLength:"Polttoväli"
image-infoShutter:"Suljin"
image-infoAperture:"Aukko"
image-infoEmbedded:"Kuvan tekniset tiedot"
image-infoUnknown:"tuntematon"
image-comments:"Kommentit"
image-noComments:"-"
image-commentButton:"Lähetä kommentti"
image-orderPhotoButton:"Tilaa kuva"
image-shutterfly:"Tässä galleriassa on tuki Shutterflylle. Klikkaa "Tilaa
kuva" -nappia, niin voit tilata Shutterfly.com:in kautta nopeasti ja
helposti korkealaatuisia paperikopioita suosikkikuvistasi."

# Comment Viewer
commentviewer-label:"viimeisimmät kommentit"
commentviewer-counter:"%comments kommenttia %totalComments:sta näkyvissä"
commentviewer-from:"Lähettäjä"
commentviewer-time:"Lähetysaika"
commentviewer-comment:"Kommentti"
commentviewer-mainPageLink:"etusivu"
commentviewer-noComments:"Valitettavasti kommentteja ei löytynyt."

# Comment Poster
commentposter-label:"lähetä kommentti"
commentposter-post:"Kirjoita kommenttisi kuvasta. HTML-komennot poistetaan
tekstistäsi."
commentposter-name:"Nimesi (vapaaehtoinen)"
commentposter-IPaddress:"IP-osoitteesi"
commentposter-comment:"Kommenttisi"
commentposter-previewCommentButton:"Tarkistus ja lähetys"
commentposter-verify:"Ole hyvä ja tarkista kommenttisi."
commentposter-anon:"anonyymi"
commentposter-editCommentButton:"Muokkaa kommenttia"
commentposter-postCommentButton:"Lähetä kommentti"
commentposter-success:"Kommentti lähetetty. Kiitos!"
commentposter-linkToImage:"takaisin kuvaan %imageName"
commentposter-errorDisabled:"Valitettavasti sivun ylläpitäjä on estänyt
kommenttien lähettämisen."
commentposter-errorBanned:"Valitettavasti sinulta on kielletty kommenttien
lähettäminen."
commentposter-errorBanned1:"Kommenttiasi ei postitettu. Siinä oli sanoja,
joiden käyttämisen sivun ylläpitäjä on kieltänyt."

# Search Results
search-label:"hakutulokset"
search-text:"hakuteksti"
search-counter:"%foundItems tulosta"
search-counter1:"1 tulos"
search-location:"Sijainti"
search-comments:"Kommentti"
search-lastMod:"Muokattu"
search-noHits:"Mitään ei valitettavasti löytynyt. Ole hyvä ja yritä
uudelleen."
search-mainPageLink:"etusivu"

# Error
error-label:"IDS-virhe"
error-text1:"On tapahtunut virhe!"
error-text2:"Jos virhetilanne jatkuu pitkään, ota yhteyttä sivuston
ylläpitäjään."

[Ids-devel] Search works now ok! (Re: Error: Searching does not work..?)

[Hans L. <hle...@at...>]

>Ashley M. Kirchner wrote:
>This is an IDS error that I have fixed locally, but not released a tarball
yet.  I really need to turn CVS on.
>In index.cgi, search and find:
>find ({wanted => &searchForFiles, follow_fast=>1}, "./albums/");
>And change it to:
>find ({wanted => \&searchForFiles, follow_fast=>1}, "./albums/");

Thank you very very much, that backslash there did the trick! Now IDS seems
to run flawlessy :)

- Hans

Re: [Ids-devel] Error: Searching does not work..?

[Ashley M. K. <as...@pc...>]

Hans Lehtinen wrote:

> - - - - - - - - - - - - - - - -
>
> Software error:
>
> Can't use string ("1") as a subroutine ref while "strict refs" in use at
> /usr/lib/perl5/5.6.0/File/Find.pm line 593.
> For help, please send mail to the webmaster, giving this error message and
> the time and date of the error.
>
> - - - - - - - - - - - - - - - -

    This is an IDS error that I have fixed locally, but not released a tarball yet.  I really need to turn CVS on.

    In index.cgi, search and find:

    find ({wanted => &searchForFiles, follow_fast=>1}, "./albums/");

    And change it to:

    find ({wanted => \&searchForFiles, follow_fast=>1}, "./albums/");

--
H | "Life is the art of drawing without an eraser." - John Gardner
  +--------------------------------------------------------------------
  Ashley M. Kirchner <mailto:as...@pc...>   .   303.442.6410 x130
  Director of Internet Operations / SysAdmin    .     800.441.3873 x130
  Photo Craft Laboratories, Inc.            .     3550 Arapahoe Ave, #6
  http://www.pcraft.com ..... .  .    .       Boulder, CO 80303, U.S.A.

Re: [Ids-devel] Error: Searching does not work..?

[Scott S. <ss...@sc...>]

If I was guessing, which I am, I would say that there is a new find 
function in perl and that it is not being called correctly.

What it requires is looking at the Find code and then looking at how it is 
called from the application.  That will help with the patch and fix.

Anyone want to volunteer to do this?

-Scott

At 12:22 PM 9/10/2002 +0300, Hans Lehtinen wrote:
>Hello,
>
>I have installed IDS to my ISP's Linux -based web server. It works just fine
>(thanks Sami), except the use of Search: it just gives an error message!
>
>When one tries to use it (fill in the search form and hit the button), there
>comes this text (between the lines):
>
>- - - - - - - - - - - - - - - -
>
>Software error:
>
>Can't use string ("1") as a subroutine ref while "strict refs" in use at
>/usr/lib/perl5/5.6.0/File/Find.pm line 593.
>For help, please send mail to the webmaster, giving this error message and
>the time and date of the error.
>
>- - - - - - - - - - - - - - - -
>
>Where can I try to find the solution, from IDS itself or is it something at
>my ISP's server... what do you think?
>
>You can see it yourself, just follow this link:
>http://www.finansia.net/ids/
>
>Regards,
>Hans Lehtinen
>FINLAND
>
>
>
>
>-------------------------------------------------------
>This sf.net email is sponsored by: OSDN - Tired of that same old
>cell phone?  Get a new here for FREE!
>https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
>_______________________________________________
>IDS-devel mailing list
>IDS...@li...
>https://lists.sourceforge.net/lists/listinfo/ids-devel

Scott Sawyer
Principal - Red Hat 
Inc.                                        http://www.redhat.com
Scott Sawyer Digital 
Photography                        http://www.scottsawyer.org
Member of Linux Users of Northern 
Arizona               http://luna.flagstaff.az.us

[Ids-devel] Error: Searching does not work..?

[Hans L. <hle...@at...>]

Hello,

I have installed IDS to my ISP's Linux -based web server. It works just fine
(thanks Sami), except the use of Search: it just gives an error message!

When one tries to use it (fill in the search form and hit the button), there
comes this text (between the lines):

- - - - - - - - - - - - - - - -

Software error:

Can't use string ("1") as a subroutine ref while "strict refs" in use at
/usr/lib/perl5/5.6.0/File/Find.pm line 593.
For help, please send mail to the webmaster, giving this error message and
the time and date of the error.

- - - - - - - - - - - - - - - -

Where can I try to find the solution, from IDS itself or is it something at
my ISP's server... what do you think?

You can see it yourself, just follow this link:
http://www.finansia.net/ids/

Regards,
Hans Lehtinen
FINLAND

[Ids-devel] cigarettes

[Constantinou C. <til...@cy...>]

COPPERBREST PHONE: 357 2 453680

ENTERPRISES FAX: 357 2 453683





FROM: COPPERBREST ENTERPRICES

Agias Kasianis 12 Flat 101

Makedonitissa Nicosia CYPRUS

Tel.357 2 453580 - 357 2 45361

Fax:357 2 453683

Email:til...@cy...





TO:=20






SUBJET: Cigarettes

Dear Sirs,

We would like to inform that our company is dealing with the trade of =
cigarettes, in Europe, Africa and Middle East.

We are looking for sellers and buyers, if you' re interested for a =
corporation, please contact us with all details.=20

We are very glad to start business with your company. Also you have to =
know we work through the Bank and Warehouse.

We wait to contact us.

Thanks a lot.

Best Regards

Constantinou Costas

Owner Director

Re: [Ids-devel] error in IDS installation

[Scott S. <ss...@sc...>]

Jiawei Ye,

I assume you have perl installed and the appropriate perl libraries to 
interact with Image Magick?

-Scott

At 02:57 AM 9/7/2002 +0800, JY wrote:
>Hi,
>
>I apologize if this is not the appropriate place to ask of IDS 
>installation. (My emails to Ashley kept being rejected).
>I have the following error on admin/index.cgi
>
>My environment is FreeBSD 4.7 pre-release w/
>ImageMagick-5.4.7.4_2  and p5-Image-Info-1.08.
>The setup goes fine but when I try to upload a jpeg file to the sample
>album, I get the following error in my apache log
>
>[Sat Sep  7 01:41:39 2002] index.cgi: Exception 410: Reference is not my
>type (Image::Magick) at ../idsShared.pm line 641.
>
>1. If I place the jpg in the sample album directory manually, it still
>occurs.
>2. index.cgi shows the album with correct icon (random pic of album
>content), but when clicked, the error occurs.
>
>Is there anything I missed or anything I can provide to help find the
>problem?
>
>Thank you.
>
>Jiawei Ye
>
>
>-------------------------------------------------------
>This sf.net email is sponsored by: OSDN - Tired of that same old
>cell phone?  Get a new here for FREE!
>https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
>_______________________________________________
>IDS-devel mailing list
>IDS...@li...
>https://lists.sourceforge.net/lists/listinfo/ids-devel

Scott Sawyer
Principal - Red Hat 
Inc.                                        http://www.redhat.com
Scott Sawyer Digital 
Photography                        http://www.scottsawyer.org
Member of Linux Users of Northern 
Arizona               http://luna.flagstaff.az.us

[Ids-devel] error in IDS installation

[JY <le...@le...>]

Hi,

I apologize if this is not the appropriate place to ask of IDS installation. (My emails to Ashley kept being rejected). 
I have the following error on admin/index.cgi

My environment is FreeBSD 4.7 pre-release w/
ImageMagick-5.4.7.4_2  and p5-Image-Info-1.08.
The setup goes fine but when I try to upload a jpeg file to the sample
album, I get the following error in my apache log

[Sat Sep  7 01:41:39 2002] index.cgi: Exception 410: Reference is not my
type (Image::Magick) at ../idsShared.pm line 641.

1. If I place the jpg in the sample album directory manually, it still
occurs.
2. index.cgi shows the album with correct icon (random pic of album
content), but when clicked, the error occurs.

Is there anything I missed or anything I can provide to help find the
problem?

Thank you.

Jiawei Ye

[Ids-devel] IDS w/mod_perl - one issue

[Kevin R. P. <kp...@ya...>]

Hi all!

I just modified apache to use mod_perl for IDS (0.82). Everything is working fine except when I
choose an image size other than "original", I get a horribly pixelated seemingly 8-bit image. 
The only change I made (besides compiling and installing mod_perl-1.27 via CPAN) are to
httpd.conf:

<Files index.cgi>
    SetHandler perl-script
    PerlHandler Apache::Registry
    Options ExecCGI
    Order deny,allow
    Allow from all
</Files>

I read thru all back-posts, and didn't see anything describing my problem, although I read lots
that said IDS pre B1.0 *won't* work with mod_perl...'course, I started playing with this before
I read the backposts....seems it works Ok after all!  Images are loading twice as fast now! 
Anyone have any ideas?

BTW, the /admin/index.cgi script was really flakey running under mod_perl, so I just renamed it
admin.cgi so it would run with straight perl.

If interested, website is at http://www.kpacek.com  Click on "photos" on the left.  Below is
some possibly usefull info.

Thanks,
-krp

# /usr/local/apache/bin/httpd -v
Server version: Apache/1.3.26 (Unix)
Server built:   Sep  2 2002 18:53:56

# perl -v
This is perl, v5.8.0 built for sun4-solaris


__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com

[Ids-devel] IDS Status

[Ashley M. K. <as...@pc...>]

    Hello folks,

    It's been a while since I posted anything, and it's about time I speak up.
As many of you may have noticed, I took over development of IDS from John
Moose.  A huge Thank You goes out to him for creating IDS in the first place.
I'm sure many of you are enjoying it.  Now onto other things.

    Life likes to throw us nasty curve balls sometimes.  And I'm afraid I've
caught one in the past several months.  After some 20+ years of working behind
computers, I now have what can be considered the beginnings of Repetitive
Strain Injury (RSI) which is causing me severe pain in both wrists which
consequently cuts down on the time I spend behind the screen.  Quite honestly
my workflow has gone from my usual 16 to 18 hours a day, to a mere 8, sometimes
a lot less.  This severely impacts what I can do on IDS, unfortunately.  I
would still like to continue the development of IDS, however it's now going at
a much, MUCH, slower pace than I originally had hoped for.

    Having said that, I'm hoping everyone here understands why there isn't much
going on in terms of development.  I am still answering to bug issues (and yes,
I am aware of a search problem with .82 right, and I have the solution, I just
haven't had a chance to check in a new tar ball yet), however I may take a
while to reply to general e-mail.  I'm sorry for this - can anyone make me some
robotic hands?  Fast, sleek, five fingers, opposable thumbs, and able to
perform just as well?  No?  Darnit.

    What I'm looking for at the moment: people willing to help.  As I cope with
my injury, I may not be able to get to a fix and/or patch as fast as I would
like to (or as fast as other people would like to), so I'm looking for someone
who's willing to step into the hot box with me and actively help out.  I may
even choose more than one person (however having too many is not a good thing
either, unless I start designating parts of IDS to specific teams of people,
and there is no need for that yet.)

    Do you feel up to the task?  Do you want to contribute to an exciting
project?  Are you willing to dedicate a small portion of your time to help a
cripple?  (ok, that was low... <grin>)  If so, please let me know.  It would
help if you're already on SourceForge, I will certainly put those candidate
first, however I will consider everyone who replies (even John himself. <grin>
)

    For the time being, I would like to thank everyone who has e-mailed me with
their patches for the various bugs they've found.  Thank you to everyone for
their suggestions and other comments.  Let's not forget those silent ones as
well, everyone in general, Thank You!

    AMK4  <am...@us...>

--
W | I haven't lost my mind; it's backed up on tape somewhere.
  +--------------------------------------------------------------------
  Ashley M. Kirchner <mailto:as...@pc...>   .   303.442.6410 x130
  IT Director / SysAdmin / WebSmith             .     800.441.3873 x130
  Photo Craft Laboratories, Inc.            .     3550 Arapahoe Ave. #6
  http://www.pcraft.com ..... .  .    .       Boulder, CO 80303, U.S.A.

[Ids-devel] Portuguese translation scene #2

[Bruno T. <ba...@ip...>]

Sorry,

Forgot to change the file header.
Here goes the fixed one.

.
Bruno Tavares