Menu
▾
▴
Re: test-build tarball for gnuplot 5.0.7
|
From: Tatsuro M. <tma...@ya...> - 2017-08-15 03:22:31
|
I have made changes in wxt_gui.cpp that you shown in patch on the mail on Aug 15 01:24:36 2017.
The changes make 5.0.7 build (and make check) successful on Cygwin 64 bit.
I do not why build was succeeded in 5.0.7 on Cygwin 32 bit without the change.
At least the note should be added for this build trouble, I think.
Tatsuro
----- Original Message -----
>From: Tatsuro MATSUOKA <tma...@ya...>
>To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
>Date: 2017/8/15, Tue 10:18
>Subject: Re: test-build tarball for gnuplot 5.0.7
>
>
>Perhaps my writing led to confusion.
>
>For MinGW, there was no problems for 5.0.7 as written on 2017-08-14 05:06:37
>FYI, for native windows including MinGW build, wxWidgets does not use GTK but use the windows api functions.
>Therefore, GTK problems are not relevant to gnuplot for native windows.
>
>
>I reported the failure for the build in Cygwin but not MinGW.
>
>
>I have not built 5.0.x branches until 5.0.6 although I have been trying to build on cvs branch for a long time.
>
>The version 5.0.7 is a first try to build gnuplot for 5.0.x on Cygwin.
>
>However, like unixy platform, wxWidgets depends on GTK on Cygwin.
>
>As was done in linux, change of GTK2 to GTK3 happened to on Cygwin
>and wxWidgets was re-built against the GTK3.
>
>
>
>
>
>
>
>----- Original Message -----
>>From: sfeam <sf...@us...>
>>To: gnu...@li...; Tatsuro MATSUOKA <tma...@ya...>
>>Date: 2017/8/15, Tue 01:24
>>Subject: Re: test-build tarball for gnuplot 5.0.7
>>
>>On Monday, 14 August 2017 19:22:44 Tatsuro MATSUOKA wrote:
>>> I note that I can build gnuplot 5.3 on cygwin 32 and 64 bit.
>>
>>The patch below was applied to 5.2/5.3 in January 2016 to address this issue.
>>It seemed at the time that this was not needed for 5.0 and indeed
>>there have been 4 releases 5.0.3 5.0.4 5.0.5 and 5.0.6 since then without it.
>>
>>Do you advise using the current code to release 5.0.7 mingw 32/64 bit builds
>>as we did for previous 5.0 versions?
>>Or would you prefer to apply the patch before releasing 5.0.7?
>>Does the patched version interfere with the raise console operation in your tests?
>>
>> Ethan
>>
>>--- wxt_gui.cpp 2015/09/01 00:02:44 1.151
>>+++ wxt_gui.cpp
2016/01/04 22:47:18 1.152
>>@@ -1,5 +1,5 @@
>>/*
>>- * $Id: wxt_gui.cpp,v 1.151 2015/09/01 00:02:44 sfeam Exp $
>>+ * $Id: wxt_gui.cpp,v 1.152 2016/01/04 22:47:18 sfeam Exp $
>> */
>>
>>/* GNUPLOT - wxt_gui.cpp */
>>@@ -1466,7 +1466,7 @@
>> * to prevent focus stealing) and is inconsistent with global bindings mechanism ) */
>>void wxtPanel::RaiseConsoleWindow()
>>{
>>-#ifdef USE_GTK
>>+#if defined(USE_GTK) && (GTK_MAJOR_VERSION == 2)
>> char *window_env;
>> unsigned long windowid = 0;
>> /* retrieve XID of gnuplot window */
>>@@ -3167,7 +3167,7 @@
>> * Refresh() also must be called, otherwise
>> * the raise won't happen immediately */
>> window->frame->panel->Refresh(false);
>>-
gdk_window_raise(window->frame->GetHandle()->window);
>>+ gdk_window_raise(gtk_widget_get_window(window->frame->GetHandle()));
>>#else
>> window->frame->Restore();
>> window->frame->Raise();
>>@@ -3180,7 +3180,7 @@
>>{
>>#ifdef USE_GTK
>> window->frame->panel->Refresh(false);
>>- gdk_window_lower(window->frame->GetHandle()->window);
>>+ gdk_window_lower(gtk_widget_get_window(window->frame->GetHandle()));
>>#else
>> window->frame->Lower();
>>#endif /* USE_GTK */
>>
>>>
>>> Tatsuro
>>>
>>>
>>>
>>> ----- Original Message -----
>>> >From: Tatsuro MATSUOKA <tma...@ya...>
>>> >To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
>>> >Date: 2017/8/14, Mon 19:07
>>> >Subject: Re: test-build tarball for gnuplot 5.0.7
>>> >
>>> >
>>> >I tried to build 5.0.7 on the Cygwin 32 and 64 bits.
>>> >For 32 bit, build was in successful.
>>> >For 64 bit, build was in failure.
>>> >
>>> >
>>> >gcc -g -O2 -L/usr/local/lib -lcerf -o gnuplot_x11.exe gnuplot_x11-gplt_x11.o gnuplot_x11-gpexecute.o gnuplot_x11-getcolor.o
gnuplot_x11-version.o -lX11 -lcaca -lcerf -lz -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lcairo -lglib-2.0 -lintl
>>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In member function 'void wxtPanel::RaiseConsoleWindow()':
>>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:1552:51: error: 'gdk_window_foreign_new' was not declared in this scope
>>> >
>>> gdk_window_raise(gdk_window_foreign_new(windowid));
>>> > ^
>>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_raise_window(wxt_window_t*, bool)':
>>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3123:48: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
>>> >
gdk_window_raise(window->frame->GetHandle()->window);
>>> >
>>> ^
>>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_lower_window(wxt_window_t*)':
>>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3141:47: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
>>> > gdk_window_lower(window->frame->GetHandle()->window);
>>> > ^
>>> >make[4]: *** [Makefile:984: wxterminal/wxt_gui.o] Error 1
>>> >make[4]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>>> >make[3]:
*** [Makefile:1027: all-recursive] Error 1
>>> >make[3]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>>> >make[2]: *** [Makefile:644: all] Error 2
>>> >make[2]:
>>> Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>>> >make[1]: *** [Makefile:419: all-recursive] Error 1
>>> >make[1]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release'
>>> >make: *** [Makefile:357: all] Error 2
>>> >
>>> >
>>> >gnuplot.exe was not built.
>>> >
>>> >
>>> >
>>> >Tatsuro
>>> >
>>> >
>>> >----- Original Message -----
>>> >>From: sfeam via gnuplot-beta <gnu...@li...>
>>>
>>To: gnuplot-beta <gnu...@li...>
>>> >>Date: 2017/8/14, Mon 07:25
>>> >>Subject: test-build tarball for gnuplot 5.0.7
>>> >>
>>> >>I have uploaded a tarball for 5.0.7 to the "5.0 Release Candidates"
>>> >>area on SourceForge.
>>> >>
>>> >>https://sourceforge.net/projects/gnuplot/files/gnuplot/5.0%20release%20candidates/
>>> >> gp507-buildtestonly.tar.gz
>>> >>
>>> >>Please use this only to test building and packaging on Windows
>>> >>or other platforms. I will wait for reports of success or problems
>>> >>before uploading an official
release of the 5.0.7 source tarball to
>>> >>its own separate release directory on
>>> SourceForge.
>>> >>
>>> >>gnuplot 5.0.7 will probably be the last release in the 5.0 series.
>>> >>After this we can concentrate attention on releasing 5.2 and
>>> >>continued development in 5.3.
>>> >>
>>> >> thanks for testing when you have time (there is no hurry)
>>> >>
>>> >> Ethan
>>> >>
>>> >>
>>> >>------------------------------------------------------------------------------
>>> >>Check out the vibrant tech community on one of the world's most
>>> >>engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>> >>_______________________________________________
>>> >>gnuplot-beta mailing
list
>>> >>gnu...@li...
>>> >>Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta
>>> >>
>>> >>
>>> >>
>>> >
>>> >
>>
>>
>>
>
> |
