Menu
▾
▴
gnuplot-beta
|
From: sfeam <sf...@us...> - 2017-08-13 22:25:59
|
I have uploaded a tarball for 5.0.7 to the "5.0 Release Candidates" area on SourceForge. https://sourceforge.net/projects/gnuplot/files/gnuplot/5.0%20release%20candidates/ gp507-buildtestonly.tar.gz Please use this only to test building and packaging on Windows or other platforms. I will wait for reports of success or problems before uploading an official release of the 5.0.7 source tarball to its own separate release directory on SourceForge. gnuplot 5.0.7 will probably be the last release in the 5.0 series. After this we can concentrate attention on releasing 5.2 and continued development in 5.3. thanks for testing when you have time (there is no hurry) Ethan |
|
From: Tatsuro M. <tma...@ya...> - 2017-08-14 05:06:37
|
I have built windows binary packages using the source tar ball. Build, packaging, all.dem processes were fine for both 32 and 64 bit. Tatsuro ----- Original Message ----- >From: sfeam via gnuplot-beta <gnu...@li...> >To: gnuplot-beta <gnu...@li...> >Date: 2017/8/14, Mon 07:25 >Subject: test-build tarball for gnuplot 5.0.7 > >I have uploaded a tarball for 5.0.7 to the "5.0 Release Candidates" >area on SourceForge. > >https://sourceforge.net/projects/gnuplot/files/gnuplot/5.0%20release%20candidates/ > gp507-buildtestonly.tar.gz > >Please use this only to test building and packaging on Windows >or other platforms. I will wait for reports of success or problems >before uploading an official release of the 5.0.7 source tarball to >its own separate release directory on SourceForge. > >gnuplot 5.0.7 will probably be the last release in the 5.0 series. >After this we can concentrate attention on releasing 5.2 and >continued development in 5.3. > > thanks for testing when you have time (there is no hurry) > > Ethan > > >------------------------------------------------------------------------------ >Check out the vibrant tech community on one of the world's most >engaging tech sites, Slashdot.org! http://sdm.link/slashdot >_______________________________________________ >gnuplot-beta mailing list >gnu...@li... >Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta > > > |
|
From: Tatsuro M. <tma...@ya...> - 2017-08-14 10:07:34
|
I tried to build 5.0.7 on the Cygwin 32 and 64 bits.
For 32 bit, build was in successful.
For 64 bit, build was in failure.
gcc -g -O2 -L/usr/local/lib -lcerf -o gnuplot_x11.exe gnuplot_x11-gplt_x11.o gnuplot_x11-gpexecute.o gnuplot_x11-getcolor.o gnuplot_x11-version.o -lX11 -lcaca -lcerf -lz -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lcairo -lglib-2.0 -lintl
../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In member function 'void wxtPanel::RaiseConsoleWindow()':
../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:1552:51: error: 'gdk_window_foreign_new' was not declared in this scope
gdk_window_raise(gdk_window_foreign_new(windowid));
^
../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_raise_window(wxt_window_t*, bool)':
../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3123:48: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
gdk_window_raise(window->frame->GetHandle()->window);
^
../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_lower_window(wxt_window_t*)':
../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3141:47: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
gdk_window_lower(window->frame->GetHandle()->window);
^
make[4]: *** [Makefile:984: wxterminal/wxt_gui.o] Error 1
make[4]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
make[3]: *** [Makefile:1027: all-recursive] Error 1
make[3]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
make[2]: *** [Makefile:644: all] Error 2
make[2]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
make[1]: *** [Makefile:419: all-recursive] Error 1
make[1]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release'
make: *** [Makefile:357: all] Error 2
gnuplot.exe was not built.
Tatsuro
----- Original Message -----
>From: sfeam via gnuplot-beta <gnu...@li...>
>To: gnuplot-beta <gnu...@li...>
>Date: 2017/8/14, Mon 07:25
>Subject: test-build tarball for gnuplot 5.0.7
>
>I have uploaded a tarball for 5.0.7 to the "5.0 Release Candidates"
>area on SourceForge.
>
>https://sourceforge.net/projects/gnuplot/files/gnuplot/5.0%20release%20candidates/
> gp507-buildtestonly.tar.gz
>
>Please use this only to test building and packaging on Windows
>or other platforms. I will wait for reports of success or problems
>before uploading an official release of the 5.0.7 source tarball to
>its own separate release directory on SourceForge.
>
>gnuplot 5.0.7 will probably be the last release in the 5.0 series.
>After this we can concentrate attention on releasing 5.2 and
>continued development in 5.3.
>
> thanks for testing when you have time (there is no hurry)
>
> Ethan
>
>
>------------------------------------------------------------------------------
>Check out the vibrant tech community on one of the world's most
>engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>_______________________________________________
>gnuplot-beta mailing list
>gnu...@li...
>Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta
>
>
> |
|
From: Tatsuro M. <tma...@ya...> - 2017-08-14 10:22:55
|
I note that I can build gnuplot 5.3 on cygwin 32 and 64 bit.
Tatsuro
----- Original Message -----
>From: Tatsuro MATSUOKA <tma...@ya...>
>To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
>Date: 2017/8/14, Mon 19:07
>Subject: Re: test-build tarball for gnuplot 5.0.7
>
>
>I tried to build 5.0.7 on the Cygwin 32 and 64 bits.
>For 32 bit, build was in successful.
>For 64 bit, build was in failure.
>
>
>gcc -g -O2 -L/usr/local/lib -lcerf -o gnuplot_x11.exe gnuplot_x11-gplt_x11.o gnuplot_x11-gpexecute.o gnuplot_x11-getcolor.o gnuplot_x11-version.o -lX11 -lcaca -lcerf -lz -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lcairo -lglib-2.0 -lintl
>../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In member function 'void wxtPanel::RaiseConsoleWindow()':
>../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:1552:51: error: 'gdk_window_foreign_new' was not declared in this scope
>
gdk_window_raise(gdk_window_foreign_new(windowid));
> ^
>../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_raise_window(wxt_window_t*, bool)':
>../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3123:48: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
> gdk_window_raise(window->frame->GetHandle()->window);
>
^
>../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_lower_window(wxt_window_t*)':
>../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3141:47: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
> gdk_window_lower(window->frame->GetHandle()->window);
> ^
>make[4]: *** [Makefile:984: wxterminal/wxt_gui.o] Error 1
>make[4]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>make[3]: *** [Makefile:1027: all-recursive] Error 1
>make[3]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>make[2]: *** [Makefile:644: all] Error 2
>make[2]:
Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>make[1]: *** [Makefile:419: all-recursive] Error 1
>make[1]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release'
>make: *** [Makefile:357: all] Error 2
>
>
>gnuplot.exe was not built.
>
>
>
>Tatsuro
>
>
>----- Original Message -----
>>From: sfeam via gnuplot-beta <gnu...@li...>
>>To: gnuplot-beta <gnu...@li...>
>>Date: 2017/8/14, Mon 07:25
>>Subject: test-build tarball for gnuplot 5.0.7
>>
>>I have uploaded a tarball for 5.0.7 to the "5.0 Release Candidates"
>>area on SourceForge.
>>
>>https://sourceforge.net/projects/gnuplot/files/gnuplot/5.0%20release%20candidates/
>> gp507-buildtestonly.tar.gz
>>
>>Please use this only to test building and packaging on Windows
>>or other platforms. I will wait for reports of success or problems
>>before uploading an official release of the 5.0.7 source tarball to
>>its own separate release directory on
SourceForge.
>>
>>gnuplot 5.0.7 will probably be the last release in the 5.0 series.
>>After this we can concentrate attention on releasing 5.2 and
>>continued development in 5.3.
>>
>> thanks for testing when you have time (there is no hurry)
>>
>> Ethan
>>
>>
>>------------------------------------------------------------------------------
>>Check out the vibrant tech community on one of the world's most
>>engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>_______________________________________________
>>gnuplot-beta mailing list
>>gnu...@li...
>>Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta
>>
>>
>>
>
> |
|
From: sfeam <sf...@us...> - 2017-08-14 16:26:21
Attachments:
wxt_gui_01jan2016.patch
|
On Monday, 14 August 2017 19:22:44 Tatsuro MATSUOKA wrote:
> I note that I can build gnuplot 5.3 on cygwin 32 and 64 bit.
The patch below was applied to 5.2/5.3 in January 2016 to address this issue.
It seemed at the time that this was not needed for 5.0 and indeed
there have been 4 releases 5.0.3 5.0.4 5.0.5 and 5.0.6 since then without it.
Do you advise using the current code to release 5.0.7 mingw 32/64 bit builds
as we did for previous 5.0 versions?
Or would you prefer to apply the patch before releasing 5.0.7?
Does the patched version interfere with the raise console operation in your tests?
Ethan
--- wxt_gui.cpp 2015/09/01 00:02:44 1.151
+++ wxt_gui.cpp 2016/01/04 22:47:18 1.152
@@ -1,5 +1,5 @@
/*
- * $Id: wxt_gui.cpp,v 1.151 2015/09/01 00:02:44 sfeam Exp $
+ * $Id: wxt_gui.cpp,v 1.152 2016/01/04 22:47:18 sfeam Exp $
*/
/* GNUPLOT - wxt_gui.cpp */
@@ -1466,7 +1466,7 @@
* to prevent focus stealing) and is inconsistent with global bindings mechanism ) */
void wxtPanel::RaiseConsoleWindow()
{
-#ifdef USE_GTK
+#if defined(USE_GTK) && (GTK_MAJOR_VERSION == 2)
char *window_env;
unsigned long windowid = 0;
/* retrieve XID of gnuplot window */
@@ -3167,7 +3167,7 @@
* Refresh() also must be called, otherwise
* the raise won't happen immediately */
window->frame->panel->Refresh(false);
- gdk_window_raise(window->frame->GetHandle()->window);
+ gdk_window_raise(gtk_widget_get_window(window->frame->GetHandle()));
#else
window->frame->Restore();
window->frame->Raise();
@@ -3180,7 +3180,7 @@
{
#ifdef USE_GTK
window->frame->panel->Refresh(false);
- gdk_window_lower(window->frame->GetHandle()->window);
+ gdk_window_lower(gtk_widget_get_window(window->frame->GetHandle()));
#else
window->frame->Lower();
#endif /* USE_GTK */
>
> Tatsuro
>
>
>
> ----- Original Message -----
> >From: Tatsuro MATSUOKA <tma...@ya...>
> >To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
> >Date: 2017/8/14, Mon 19:07
> >Subject: Re: test-build tarball for gnuplot 5.0.7
> >
> >
> >I tried to build 5.0.7 on the Cygwin 32 and 64 bits.
> >For 32 bit, build was in successful.
> >For 64 bit, build was in failure.
> >
> >
> >gcc -g -O2 -L/usr/local/lib -lcerf -o gnuplot_x11.exe gnuplot_x11-gplt_x11.o gnuplot_x11-gpexecute.o gnuplot_x11-getcolor.o gnuplot_x11-version.o -lX11 -lcaca -lcerf -lz -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lcairo -lglib-2.0 -lintl
> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In member function 'void wxtPanel::RaiseConsoleWindow()':
> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:1552:51: error: 'gdk_window_foreign_new' was not declared in this scope
> >
> gdk_window_raise(gdk_window_foreign_new(windowid));
> > ^
> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_raise_window(wxt_window_t*, bool)':
> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3123:48: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
> > gdk_window_raise(window->frame->GetHandle()->window);
> >
> ^
> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_lower_window(wxt_window_t*)':
> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3141:47: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
> > gdk_window_lower(window->frame->GetHandle()->window);
> > ^
> >make[4]: *** [Makefile:984: wxterminal/wxt_gui.o] Error 1
> >make[4]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
> >make[3]: *** [Makefile:1027: all-recursive] Error 1
> >make[3]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
> >make[2]: *** [Makefile:644: all] Error 2
> >make[2]:
> Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
> >make[1]: *** [Makefile:419: all-recursive] Error 1
> >make[1]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release'
> >make: *** [Makefile:357: all] Error 2
> >
> >
> >gnuplot.exe was not built.
> >
> >
> >
> >Tatsuro
> >
> >
> >----- Original Message -----
> >>From: sfeam via gnuplot-beta <gnu...@li...>
> >>To: gnuplot-beta <gnu...@li...>
> >>Date: 2017/8/14, Mon 07:25
> >>Subject: test-build tarball for gnuplot 5.0.7
> >>
> >>I have uploaded a tarball for 5.0.7 to the "5.0 Release Candidates"
> >>area on SourceForge.
> >>
> >>https://sourceforge.net/projects/gnuplot/files/gnuplot/5.0%20release%20candidates/
> >> gp507-buildtestonly.tar.gz
> >>
> >>Please use this only to test building and packaging on Windows
> >>or other platforms. I will wait for reports of success or problems
> >>before uploading an official release of the 5.0.7 source tarball to
> >>its own separate release directory on
> SourceForge.
> >>
> >>gnuplot 5.0.7 will probably be the last release in the 5.0 series.
> >>After this we can concentrate attention on releasing 5.2 and
> >>continued development in 5.3.
> >>
> >> thanks for testing when you have time (there is no hurry)
> >>
> >> Ethan
> >>
> >>
> >>------------------------------------------------------------------------------
> >>Check out the vibrant tech community on one of the world's most
> >>engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >>_______________________________________________
> >>gnuplot-beta mailing list
> >>gnu...@li...
> >>Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta
> >>
> >>
> >>
> >
> >
|
|
From: Mojca M. <moj...@gm...> - 2017-08-14 16:38:34
|
On 14 August 2017 at 18:24, sfeam via gnuplot-beta wrote: > On Monday, 14 August 2017 19:22:44 Tatsuro MATSUOKA wrote: >> I note that I can build gnuplot 5.3 on cygwin 32 and 64 bit. > > The patch below was applied to 5.2/5.3 in January 2016 to address this issue. > It seemed at the time that this was not needed for 5.0 and indeed > there have been 4 releases 5.0.3 5.0.4 5.0.5 and 5.0.6 since then without it. It could be that cygwin upgraded GTK in the meantime and none of the users of gnuplot 5.0 actually tested it against GTK 3. It's just speculation though, I didn't run any tests. I don't see why that patch would be any less useful for 5.0 than it is for 5.2. Mojca |
|
From: sfeam <sf...@us...> - 2017-08-14 16:48:26
|
On Monday, 14 August 2017 18:38:26 Mojca Miklavec wrote: > On 14 August 2017 at 18:24, sfeam via gnuplot-beta wrote: > > On Monday, 14 August 2017 19:22:44 Tatsuro MATSUOKA wrote: > >> I note that I can build gnuplot 5.3 on cygwin 32 and 64 bit. > > > > The patch below was applied to 5.2/5.3 in January 2016 to address this issue. > > It seemed at the time that this was not needed for 5.0 and indeed > > there have been 4 releases 5.0.3 5.0.4 5.0.5 and 5.0.6 since then without it. > > It could be that cygwin upgraded GTK in the meantime and none of the > users of gnuplot 5.0 actually tested it against GTK 3. It's just > speculation though, I didn't run any tests. > > I don't see why that patch would be any less useful for 5.0 than it is for 5.2. > > Mojca I could be wrong since I'm only looking at the code rather than actually running it, but it appears to me that after applying the patch anyone using GTK3 will lose the "raise console" functionality. Is that not true for the mingw build, or is it just that the mingw build is still using GTK2? I'm OK with that but people keep telling me it is need for Windows. Ethan |
|
From: Tatsuro M. <tma...@ya...> - 2017-08-15 01:18:16
|
Perhaps my writing led to confusion.
For MinGW, there was no problems for 5.0.7 as written on 2017-08-14 05:06:37
FYI, for native windows including MinGW build, wxWidgets does not use GTK but use the windows api functions.
Therefore, GTK problems are not relevant to gnuplot for native windows.
I reported the failure for the build in Cygwin but not MinGW.
I have not built 5.0.x branches until 5.0.6 although I have been trying to build on cvs branch for a long time.
The version 5.0.7 is a first try to build gnuplot for 5.0.x on Cygwin.
However, like unixy platform, wxWidgets depends on GTK on Cygwin.
As was done in linux, change of GTK2 to GTK3 happened to on Cygwin
and wxWidgets was re-built against the GTK3.
----- Original Message -----
>From: sfeam <sf...@us...>
>To: gnu...@li...; Tatsuro MATSUOKA <tma...@ya...>
>Date: 2017/8/15, Tue 01:24
>Subject: Re: test-build tarball for gnuplot 5.0.7
>
>On Monday, 14 August 2017 19:22:44 Tatsuro MATSUOKA wrote:
>> I note that I can build gnuplot 5.3 on cygwin 32 and 64 bit.
>
>The patch below was applied to 5.2/5.3 in January 2016 to address this issue.
>It seemed at the time that this was not needed for 5.0 and indeed
>there have been 4 releases 5.0.3 5.0.4 5.0.5 and 5.0.6 since then without it.
>
>Do you advise using the current code to release 5.0.7 mingw 32/64 bit builds
>as we did for previous 5.0 versions?
>Or would you prefer to apply the patch before releasing 5.0.7?
>Does the patched version interfere with the raise console operation in your tests?
>
> Ethan
>
>--- wxt_gui.cpp 2015/09/01 00:02:44 1.151
>+++ wxt_gui.cpp 2016/01/04 22:47:18 1.152
>@@ -1,5 +1,5 @@
>/*
>- * $Id: wxt_gui.cpp,v 1.151 2015/09/01 00:02:44 sfeam Exp $
>+ * $Id: wxt_gui.cpp,v 1.152 2016/01/04 22:47:18 sfeam Exp $
> */
>
>/* GNUPLOT - wxt_gui.cpp */
>@@ -1466,7 +1466,7 @@
> * to prevent focus stealing) and is inconsistent with global bindings mechanism ) */
>void wxtPanel::RaiseConsoleWindow()
>{
>-#ifdef USE_GTK
>+#if defined(USE_GTK) && (GTK_MAJOR_VERSION == 2)
> char *window_env;
> unsigned long windowid = 0;
> /* retrieve XID of gnuplot window */
>@@ -3167,7 +3167,7 @@
> * Refresh() also must be called, otherwise
> * the raise won't happen immediately */
> window->frame->panel->Refresh(false);
>- gdk_window_raise(window->frame->GetHandle()->window);
>+ gdk_window_raise(gtk_widget_get_window(window->frame->GetHandle()));
>#else
> window->frame->Restore();
> window->frame->Raise();
>@@ -3180,7 +3180,7 @@
>{
>#ifdef USE_GTK
> window->frame->panel->Refresh(false);
>- gdk_window_lower(window->frame->GetHandle()->window);
>+ gdk_window_lower(gtk_widget_get_window(window->frame->GetHandle()));
>#else
> window->frame->Lower();
>#endif /* USE_GTK */
>
>>
>> Tatsuro
>>
>>
>>
>> ----- Original Message -----
>> >From: Tatsuro MATSUOKA <tma...@ya...>
>> >To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
>> >Date: 2017/8/14, Mon 19:07
>> >Subject: Re: test-build tarball for gnuplot 5.0.7
>> >
>> >
>> >I tried to build 5.0.7 on the Cygwin 32 and 64 bits.
>> >For 32 bit, build was in successful.
>> >For 64 bit, build was in failure.
>> >
>> >
>> >gcc -g -O2 -L/usr/local/lib -lcerf -o gnuplot_x11.exe gnuplot_x11-gplt_x11.o gnuplot_x11-gpexecute.o gnuplot_x11-getcolor.o gnuplot_x11-version.o -lX11 -lcaca -lcerf -lz -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lcairo -lglib-2.0 -lintl
>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In member function 'void wxtPanel::RaiseConsoleWindow()':
>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:1552:51: error: 'gdk_window_foreign_new' was not declared in this scope
>> >
>> gdk_window_raise(gdk_window_foreign_new(windowid));
>> > ^
>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_raise_window(wxt_window_t*, bool)':
>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3123:48: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
>> > gdk_window_raise(window->frame->GetHandle()->window);
>> >
>> ^
>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_lower_window(wxt_window_t*)':
>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3141:47: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
>> > gdk_window_lower(window->frame->GetHandle()->window);
>> > ^
>> >make[4]: *** [Makefile:984: wxterminal/wxt_gui.o] Error 1
>> >make[4]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>> >make[3]: *** [Makefile:1027: all-recursive] Error 1
>> >make[3]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>> >make[2]: *** [Makefile:644: all] Error 2
>> >make[2]:
>> Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>> >make[1]: *** [Makefile:419: all-recursive] Error 1
>> >make[1]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release'
>> >make: *** [Makefile:357: all] Error 2
>> >
>> >
>> >gnuplot.exe was not built.
>> >
>> >
>> >
>> >Tatsuro
>> >
>> >
>> >----- Original Message -----
>> >>From: sfeam via gnuplot-beta <gnu...@li...>
>> >>To: gnuplot-beta <gnu...@li...>
>> >>Date: 2017/8/14, Mon 07:25
>> >>Subject: test-build tarball for gnuplot 5.0.7
>> >>
>> >>I have uploaded a tarball for 5.0.7 to the "5.0 Release Candidates"
>> >>area on SourceForge.
>> >>
>> >>https://sourceforge.net/projects/gnuplot/files/gnuplot/5.0%20release%20candidates/
>> >> gp507-buildtestonly.tar.gz
>> >>
>> >>Please use this only to test building and packaging on Windows
>> >>or other platforms. I will wait for reports of success or problems
>> >>before uploading an official release of the 5.0.7 source tarball to
>> >>its own separate release directory on
>> SourceForge.
>> >>
>> >>gnuplot 5.0.7 will probably be the last release in the 5.0 series.
>> >>After this we can concentrate attention on releasing 5.2 and
>> >>continued development in 5.3.
>> >>
>> >> thanks for testing when you have time (there is no hurry)
>> >>
>> >> Ethan
>> >>
>> >>
>> >>------------------------------------------------------------------------------
>> >>Check out the vibrant tech community on one of the world's most
>> >>engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> >>_______________________________________________
>> >>gnuplot-beta mailing list
>> >>gnu...@li...
>> >>Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta
>> >>
>> >>
>> >>
>> >
>> >
>
>
> |
|
From: Tatsuro M. <tma...@ya...> - 2017-08-15 03:22:31
|
I have made changes in wxt_gui.cpp that you shown in patch on the mail on Aug 15 01:24:36 2017.
The changes make 5.0.7 build (and make check) successful on Cygwin 64 bit.
I do not why build was succeeded in 5.0.7 on Cygwin 32 bit without the change.
At least the note should be added for this build trouble, I think.
Tatsuro
----- Original Message -----
>From: Tatsuro MATSUOKA <tma...@ya...>
>To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
>Date: 2017/8/15, Tue 10:18
>Subject: Re: test-build tarball for gnuplot 5.0.7
>
>
>Perhaps my writing led to confusion.
>
>For MinGW, there was no problems for 5.0.7 as written on 2017-08-14 05:06:37
>FYI, for native windows including MinGW build, wxWidgets does not use GTK but use the windows api functions.
>Therefore, GTK problems are not relevant to gnuplot for native windows.
>
>
>I reported the failure for the build in Cygwin but not MinGW.
>
>
>I have not built 5.0.x branches until 5.0.6 although I have been trying to build on cvs branch for a long time.
>
>The version 5.0.7 is a first try to build gnuplot for 5.0.x on Cygwin.
>
>However, like unixy platform, wxWidgets depends on GTK on Cygwin.
>
>As was done in linux, change of GTK2 to GTK3 happened to on Cygwin
>and wxWidgets was re-built against the GTK3.
>
>
>
>
>
>
>
>----- Original Message -----
>>From: sfeam <sf...@us...>
>>To: gnu...@li...; Tatsuro MATSUOKA <tma...@ya...>
>>Date: 2017/8/15, Tue 01:24
>>Subject: Re: test-build tarball for gnuplot 5.0.7
>>
>>On Monday, 14 August 2017 19:22:44 Tatsuro MATSUOKA wrote:
>>> I note that I can build gnuplot 5.3 on cygwin 32 and 64 bit.
>>
>>The patch below was applied to 5.2/5.3 in January 2016 to address this issue.
>>It seemed at the time that this was not needed for 5.0 and indeed
>>there have been 4 releases 5.0.3 5.0.4 5.0.5 and 5.0.6 since then without it.
>>
>>Do you advise using the current code to release 5.0.7 mingw 32/64 bit builds
>>as we did for previous 5.0 versions?
>>Or would you prefer to apply the patch before releasing 5.0.7?
>>Does the patched version interfere with the raise console operation in your tests?
>>
>> Ethan
>>
>>--- wxt_gui.cpp 2015/09/01 00:02:44 1.151
>>+++ wxt_gui.cpp
2016/01/04 22:47:18 1.152
>>@@ -1,5 +1,5 @@
>>/*
>>- * $Id: wxt_gui.cpp,v 1.151 2015/09/01 00:02:44 sfeam Exp $
>>+ * $Id: wxt_gui.cpp,v 1.152 2016/01/04 22:47:18 sfeam Exp $
>> */
>>
>>/* GNUPLOT - wxt_gui.cpp */
>>@@ -1466,7 +1466,7 @@
>> * to prevent focus stealing) and is inconsistent with global bindings mechanism ) */
>>void wxtPanel::RaiseConsoleWindow()
>>{
>>-#ifdef USE_GTK
>>+#if defined(USE_GTK) && (GTK_MAJOR_VERSION == 2)
>> char *window_env;
>> unsigned long windowid = 0;
>> /* retrieve XID of gnuplot window */
>>@@ -3167,7 +3167,7 @@
>> * Refresh() also must be called, otherwise
>> * the raise won't happen immediately */
>> window->frame->panel->Refresh(false);
>>-
gdk_window_raise(window->frame->GetHandle()->window);
>>+ gdk_window_raise(gtk_widget_get_window(window->frame->GetHandle()));
>>#else
>> window->frame->Restore();
>> window->frame->Raise();
>>@@ -3180,7 +3180,7 @@
>>{
>>#ifdef USE_GTK
>> window->frame->panel->Refresh(false);
>>- gdk_window_lower(window->frame->GetHandle()->window);
>>+ gdk_window_lower(gtk_widget_get_window(window->frame->GetHandle()));
>>#else
>> window->frame->Lower();
>>#endif /* USE_GTK */
>>
>>>
>>> Tatsuro
>>>
>>>
>>>
>>> ----- Original Message -----
>>> >From: Tatsuro MATSUOKA <tma...@ya...>
>>> >To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
>>> >Date: 2017/8/14, Mon 19:07
>>> >Subject: Re: test-build tarball for gnuplot 5.0.7
>>> >
>>> >
>>> >I tried to build 5.0.7 on the Cygwin 32 and 64 bits.
>>> >For 32 bit, build was in successful.
>>> >For 64 bit, build was in failure.
>>> >
>>> >
>>> >gcc -g -O2 -L/usr/local/lib -lcerf -o gnuplot_x11.exe gnuplot_x11-gplt_x11.o gnuplot_x11-gpexecute.o gnuplot_x11-getcolor.o
gnuplot_x11-version.o -lX11 -lcaca -lcerf -lz -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lcairo -lglib-2.0 -lintl
>>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In member function 'void wxtPanel::RaiseConsoleWindow()':
>>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:1552:51: error: 'gdk_window_foreign_new' was not declared in this scope
>>> >
>>> gdk_window_raise(gdk_window_foreign_new(windowid));
>>> > ^
>>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_raise_window(wxt_window_t*, bool)':
>>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3123:48: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
>>> >
gdk_window_raise(window->frame->GetHandle()->window);
>>> >
>>> ^
>>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_lower_window(wxt_window_t*)':
>>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3141:47: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
>>> > gdk_window_lower(window->frame->GetHandle()->window);
>>> > ^
>>> >make[4]: *** [Makefile:984: wxterminal/wxt_gui.o] Error 1
>>> >make[4]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>>> >make[3]:
*** [Makefile:1027: all-recursive] Error 1
>>> >make[3]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>>> >make[2]: *** [Makefile:644: all] Error 2
>>> >make[2]:
>>> Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>>> >make[1]: *** [Makefile:419: all-recursive] Error 1
>>> >make[1]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release'
>>> >make: *** [Makefile:357: all] Error 2
>>> >
>>> >
>>> >gnuplot.exe was not built.
>>> >
>>> >
>>> >
>>> >Tatsuro
>>> >
>>> >
>>> >----- Original Message -----
>>> >>From: sfeam via gnuplot-beta <gnu...@li...>
>>>
>>To: gnuplot-beta <gnu...@li...>
>>> >>Date: 2017/8/14, Mon 07:25
>>> >>Subject: test-build tarball for gnuplot 5.0.7
>>> >>
>>> >>I have uploaded a tarball for 5.0.7 to the "5.0 Release Candidates"
>>> >>area on SourceForge.
>>> >>
>>> >>https://sourceforge.net/projects/gnuplot/files/gnuplot/5.0%20release%20candidates/
>>> >> gp507-buildtestonly.tar.gz
>>> >>
>>> >>Please use this only to test building and packaging on Windows
>>> >>or other platforms. I will wait for reports of success or problems
>>> >>before uploading an official
release of the 5.0.7 source tarball to
>>> >>its own separate release directory on
>>> SourceForge.
>>> >>
>>> >>gnuplot 5.0.7 will probably be the last release in the 5.0 series.
>>> >>After this we can concentrate attention on releasing 5.2 and
>>> >>continued development in 5.3.
>>> >>
>>> >> thanks for testing when you have time (there is no hurry)
>>> >>
>>> >> Ethan
>>> >>
>>> >>
>>> >>------------------------------------------------------------------------------
>>> >>Check out the vibrant tech community on one of the world's most
>>> >>engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>> >>_______________________________________________
>>> >>gnuplot-beta mailing
list
>>> >>gnu...@li...
>>> >>Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta
>>> >>
>>> >>
>>> >>
>>> >
>>> >
>>
>>
>>
>
> |
|
From: sfeam <sf...@us...> - 2017-08-16 05:04:10
|
On Tuesday, 15 August 2017 12:22:19 Tatsuro MATSUOKA wrote:
> I have made changes in wxt_gui.cpp that you shown in patch on the mail on Aug 15 01:24:36 2017.
>
> The changes make 5.0.7 build (and make check) successful on Cygwin 64 bit.
>
> I do not why build was succeeded in 5.0.7 on Cygwin 32 bit without the change.
Thank you for testing.
Yes it is unexpected that the 32-bit build would work but not the 64-bit build.
I have applied the patch to wxt_gui.cpp and uploaded the amended source tarball
gnuplot-5.0.7.tar.gz to SourceForge. The only change from the testing tarball
is the patch to wxt_gui.cpp and the "last modified" date in version.c
here's to the final release in the 5.0 series!
Ethan
>
> At least the note should be added for this build trouble, I think.
>
> Tatsuro
>
>
>
> ----- Original Message -----
> >From: Tatsuro MATSUOKA <tma...@ya...>
> >To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
> >Date: 2017/8/15, Tue 10:18
> >Subject: Re: test-build tarball for gnuplot 5.0.7
> >
> >
> >Perhaps my writing led to confusion.
> >
> >For MinGW, there was no problems for 5.0.7 as written on 2017-08-14 05:06:37
> >FYI, for native windows including MinGW build, wxWidgets does not use GTK but use the windows api functions.
> >Therefore, GTK problems are not relevant to gnuplot for native windows.
> >
> >
> >I reported the failure for the build in Cygwin but not MinGW.
> >
> >
> >I have not built 5.0.x branches until 5.0.6 although I have been trying to build on cvs branch for a long time.
> >
> >The version 5.0.7 is a first try to build gnuplot for 5.0.x on Cygwin.
> >
> >However, like unixy platform, wxWidgets depends on GTK on Cygwin.
> >
> >As was done in linux, change of GTK2 to GTK3 happened to on Cygwin
> >and wxWidgets was re-built against the GTK3.
> >
> >
> >
> >
> >
> >
> >
> >----- Original Message -----
> >>From: sfeam <sf...@us...>
> >>To: gnu...@li...; Tatsuro MATSUOKA <tma...@ya...>
> >>Date: 2017/8/15, Tue 01:24
> >>Subject: Re: test-build tarball for gnuplot 5.0.7
> >>
> >>On Monday, 14 August 2017 19:22:44 Tatsuro MATSUOKA wrote:
> >>> I note that I can build gnuplot 5.3 on cygwin 32 and 64 bit.
> >>
> >>The patch below was applied to 5.2/5.3 in January 2016 to address this issue.
> >>It seemed at the time that this was not needed for 5.0 and indeed
> >>there have been 4 releases 5.0.3 5.0.4 5.0.5 and 5.0.6 since then without it.
> >>
> >>Do you advise using the current code to release 5.0.7 mingw 32/64 bit builds
> >>as we did for previous 5.0 versions?
> >>Or would you prefer to apply the patch before releasing 5.0.7?
> >>Does the patched version interfere with the raise console operation in your tests?
> >>
> >> Ethan
> >>
> >>--- wxt_gui.cpp 2015/09/01 00:02:44 1.151
> >>+++ wxt_gui.cpp
> 2016/01/04 22:47:18 1.152
> >>@@ -1,5 +1,5 @@
> >>/*
> >>- * $Id: wxt_gui.cpp,v 1.151 2015/09/01 00:02:44 sfeam Exp $
> >>+ * $Id: wxt_gui.cpp,v 1.152 2016/01/04 22:47:18 sfeam Exp $
> >> */
> >>
> >>/* GNUPLOT - wxt_gui.cpp */
> >>@@ -1466,7 +1466,7 @@
> >> * to prevent focus stealing) and is inconsistent with global bindings mechanism ) */
> >>void wxtPanel::RaiseConsoleWindow()
> >>{
> >>-#ifdef USE_GTK
> >>+#if defined(USE_GTK) && (GTK_MAJOR_VERSION == 2)
> >> char *window_env;
> >> unsigned long windowid = 0;
> >> /* retrieve XID of gnuplot window */
> >>@@ -3167,7 +3167,7 @@
> >> * Refresh() also must be called, otherwise
> >> * the raise won't happen immediately */
> >> window->frame->panel->Refresh(false);
> >>-
> gdk_window_raise(window->frame->GetHandle()->window);
> >>+ gdk_window_raise(gtk_widget_get_window(window->frame->GetHandle()));
> >>#else
> >> window->frame->Restore();
> >> window->frame->Raise();
> >>@@ -3180,7 +3180,7 @@
> >>{
> >>#ifdef USE_GTK
> >> window->frame->panel->Refresh(false);
> >>- gdk_window_lower(window->frame->GetHandle()->window);
> >>+ gdk_window_lower(gtk_widget_get_window(window->frame->GetHandle()));
> >>#else
> >> window->frame->Lower();
> >>#endif /* USE_GTK */
> >>
> >>>
> >>> Tatsuro
> >>>
> >>>
> >>>
> >>> ----- Original Message -----
> >>> >From: Tatsuro MATSUOKA <tma...@ya...>
> >>> >To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
> >>> >Date: 2017/8/14, Mon 19:07
> >>> >Subject: Re: test-build tarball for gnuplot 5.0.7
> >>> >
> >>> >
> >>> >I tried to build 5.0.7 on the Cygwin 32 and 64 bits.
> >>> >For 32 bit, build was in successful.
> >>> >For 64 bit, build was in failure.
> >>> >
> >>> >
> >>> >gcc -g -O2 -L/usr/local/lib -lcerf -o gnuplot_x11.exe gnuplot_x11-gplt_x11.o gnuplot_x11-gpexecute.o gnuplot_x11-getcolor.o
> gnuplot_x11-version.o -lX11 -lcaca -lcerf -lz -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lcairo -lglib-2.0 -lintl
> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In member function 'void wxtPanel::RaiseConsoleWindow()':
> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:1552:51: error: 'gdk_window_foreign_new' was not declared in this scope
> >>> >
> >>> gdk_window_raise(gdk_window_foreign_new(windowid));
> >>> > ^
> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_raise_window(wxt_window_t*, bool)':
> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3123:48: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
> >>> >
> gdk_window_raise(window->frame->GetHandle()->window);
> >>> >
> >>> ^
> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_lower_window(wxt_window_t*)':
> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3141:47: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
> >>> > gdk_window_lower(window->frame->GetHandle()->window);
> >>> > ^
> >>> >make[4]: *** [Makefile:984: wxterminal/wxt_gui.o] Error 1
> >>> >make[4]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
> >>> >make[3]:
> *** [Makefile:1027: all-recursive] Error 1
> >>> >make[3]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
> >>> >make[2]: *** [Makefile:644: all] Error 2
> >>> >make[2]:
> >>> Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
> >>> >make[1]: *** [Makefile:419: all-recursive] Error 1
> >>> >make[1]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release'
> >>> >make: *** [Makefile:357: all] Error 2
> >>> >
> >>> >
> >>> >gnuplot.exe was not built.
> >>> >
> >>> >
> >>> >
> >>> >Tatsuro
> >>> >
> >>> >
> >>> >----- Original Message -----
> >>> >>From: sfeam via gnuplot-beta <gnu...@li...>
> >>>
> >>To: gnuplot-beta <gnu...@li...>
> >>> >>Date: 2017/8/14, Mon 07:25
> >>> >>Subject: test-build tarball for gnuplot 5.0.7
> >>> >>
> >>> >>I have uploaded a tarball for 5.0.7 to the "5.0 Release Candidates"
> >>> >>area on SourceForge.
> >>> >>
> >>> >>https://sourceforge.net/projects/gnuplot/files/gnuplot/5.0%20release%20candidates/
> >>> >> gp507-buildtestonly.tar.gz
> >>> >>
> >>> >>Please use this only to test building and packaging on Windows
> >>> >>or other platforms. I will wait for reports of success or problems
> >>> >>before uploading an official
> release of the 5.0.7 source tarball to
> >>> >>its own separate release directory on
> >>> SourceForge.
> >>> >>
> >>> >>gnuplot 5.0.7 will probably be the last release in the 5.0 series.
> >>> >>After this we can concentrate attention on releasing 5.2 and
> >>> >>continued development in 5.3.
> >>> >>
> >>> >> thanks for testing when you have time (there is no hurry)
> >>> >>
> >>> >> Ethan
> >>> >>
> >>> >>
> >>> >>------------------------------------------------------------------------------
> >>> >>Check out the vibrant tech community on one of the world's most
> >>> >>engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >>> >>_______________________________________________
> >>> >>gnuplot-beta mailing
> list
> >>> >>gnu...@li...
> >>> >>Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta
> >>> >>
> >>> >>
> >>> >>
> >>> >
> >>> >
> >>
> >>
> >>
> >
> >
|
|
From: Tatsuro M. <tma...@ya...> - 2017-08-16 07:42:58
|
I have built windows binary packages on MinGW platform and uploaded
to the SourceForge site.
Tatsuro
----- Original Message -----
>From: sfeam <sf...@us...>
>To: gnu...@li...; Tatsuro MATSUOKA <tma...@ya...>
>Date: 2017/8/16, Wed 14:00
>Subject: Release 5.0.7 [was: test-build tarball for gnuplot 5.0.7]
>
>On Tuesday, 15 August 2017 12:22:19 Tatsuro MATSUOKA wrote:
>> I have made changes in wxt_gui.cpp that you shown in patch on the mail on Aug 15 01:24:36 2017.
>>
>> The changes make 5.0.7 build (and make check) successful on Cygwin 64 bit.
>>
>> I do not why build was succeeded in 5.0.7 on Cygwin 32 bit without the change.
>
>Thank you for testing.
>Yes it is unexpected that the 32-bit build would work but not the 64-bit build.
>
>I have applied the patch to wxt_gui.cpp and uploaded the amended source tarball
>gnuplot-5.0.7.tar.gz to SourceForge. The only change from the testing tarball
>is the patch to wxt_gui.cpp and the "last modified" date in version.c
>
> here's to the final release in the 5.0 series!
>
> Ethan
>
>
>>
>> At least the note should be added for this build trouble, I think.
>>
>> Tatsuro
>>
>>
>>
>> ----- Original Message -----
>> >From: Tatsuro MATSUOKA <tma...@ya...>
>> >To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
>> >Date: 2017/8/15, Tue 10:18
>> >Subject: Re: test-build tarball for gnuplot 5.0.7
>> >
>> >
>> >Perhaps my writing led to confusion.
>> >
>> >For MinGW, there was no problems for 5.0.7 as written on 2017-08-14 05:06:37
>> >FYI, for native windows including MinGW build, wxWidgets does not use GTK but use the windows api functions.
>> >Therefore, GTK problems are not relevant to gnuplot for native windows.
>> >
>> >
>> >I reported the failure for the build in Cygwin but not MinGW.
>> >
>> >
>> >I have not built 5.0.x branches until 5.0.6 although I have been trying to build on cvs branch for a long time.
>> >
>> >The version 5.0.7 is a first try to build gnuplot for 5.0.x on Cygwin.
>> >
>> >However, like unixy platform, wxWidgets depends on GTK on Cygwin.
>> >
>> >As was done in linux, change of GTK2 to GTK3 happened to on Cygwin
>> >and wxWidgets was re-built against the GTK3.
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >----- Original Message -----
>> >>From: sfeam <sf...@us...>
>> >>To: gnu...@li...; Tatsuro MATSUOKA <tma...@ya...>
>> >>Date: 2017/8/15, Tue 01:24
>> >>Subject: Re: test-build tarball for gnuplot 5.0.7
>> >>
>> >>On Monday, 14 August 2017 19:22:44 Tatsuro MATSUOKA wrote:
>> >>> I note that I can build gnuplot 5.3 on cygwin 32 and 64 bit.
>> >>
>> >>The patch below was applied to 5.2/5.3 in January 2016 to address this issue.
>> >>It seemed at the time that this was not needed for 5.0 and indeed
>> >>there have been 4 releases 5.0.3 5.0.4 5.0.5 and 5.0.6 since then without it.
>> >>
>> >>Do you advise using the current code to release 5.0.7 mingw 32/64 bit builds
>> >>as we did for previous 5.0 versions?
>> >>Or would you prefer to apply the patch before releasing 5.0.7?
>> >>Does the patched version interfere with the raise console operation in your tests?
>> >>
>> >> Ethan
>> >>
>> >>--- wxt_gui.cpp 2015/09/01 00:02:44 1.151
>> >>+++ wxt_gui.cpp
>> 2016/01/04 22:47:18 1.152
>> >>@@ -1,5 +1,5 @@
>> >>/*
>> >>- * $Id: wxt_gui.cpp,v 1.151 2015/09/01 00:02:44 sfeam Exp $
>> >>+ * $Id: wxt_gui.cpp,v 1.152 2016/01/04 22:47:18 sfeam Exp $
>> >> */
>> >>
>> >>/* GNUPLOT - wxt_gui.cpp */
>> >>@@ -1466,7 +1466,7 @@
>> >> * to prevent focus stealing) and is inconsistent with global bindings mechanism ) */
>> >>void wxtPanel::RaiseConsoleWindow()
>> >>{
>> >>-#ifdef USE_GTK
>> >>+#if defined(USE_GTK) && (GTK_MAJOR_VERSION == 2)
>> >> char *window_env;
>> >> unsigned long windowid = 0;
>> >> /* retrieve XID of gnuplot window */
>> >>@@ -3167,7 +3167,7 @@
>> >> * Refresh() also must be called, otherwise
>> >> * the raise won't happen immediately */
>> >> window->frame->panel->Refresh(false);
>> >>-
>> gdk_window_raise(window->frame->GetHandle()->window);
>> >>+ gdk_window_raise(gtk_widget_get_window(window->frame->GetHandle()));
>> >>#else
>> >> window->frame->Restore();
>> >> window->frame->Raise();
>> >>@@ -3180,7 +3180,7 @@
>> >>{
>> >>#ifdef USE_GTK
>> >> window->frame->panel->Refresh(false);
>> >>- gdk_window_lower(window->frame->GetHandle()->window);
>> >>+ gdk_window_lower(gtk_widget_get_window(window->frame->GetHandle()));
>> >>#else
>> >> window->frame->Lower();
>> >>#endif /* USE_GTK */
>> >>
>> >>>
>> >>> Tatsuro
>> >>>
>> >>>
>> >>>
>> >>> ----- Original Message -----
>> >>> >From: Tatsuro MATSUOKA <tma...@ya...>
>> >>> >To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
>> >>> >Date: 2017/8/14, Mon 19:07
>> >>> >Subject: Re: test-build tarball for gnuplot 5.0.7
>> >>> >
>> >>> >
>> >>> >I tried to build 5.0.7 on the Cygwin 32 and 64 bits.
>> >>> >For 32 bit, build was in successful.
>> >>> >For 64 bit, build was in failure.
>> >>> >
>> >>> >
>> >>> >gcc -g -O2 -L/usr/local/lib -lcerf -o gnuplot_x11.exe gnuplot_x11-gplt_x11.o gnuplot_x11-gpexecute.o gnuplot_x11-getcolor.o
>> gnuplot_x11-version.o -lX11 -lcaca -lcerf -lz -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lcairo -lglib-2.0 -lintl
>> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In member function 'void wxtPanel::RaiseConsoleWindow()':
>> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:1552:51: error: 'gdk_window_foreign_new' was not declared in this scope
>> >>> >
>> >>> gdk_window_raise(gdk_window_foreign_new(windowid));
>> >>> > ^
>> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_raise_window(wxt_window_t*, bool)':
>> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3123:48: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
>> >>> >
>> gdk_window_raise(window->frame->GetHandle()->window);
>> >>> >
>> >>> ^
>> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_lower_window(wxt_window_t*)':
>> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3141:47: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
>> >>> > gdk_window_lower(window->frame->GetHandle()->window);
>> >>> > ^
>> >>> >make[4]: *** [Makefile:984: wxterminal/wxt_gui.o] Error 1
>> >>> >make[4]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>> >>> >make[3]:
>> *** [Makefile:1027: all-recursive] Error 1
>> >>> >make[3]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>> >>> >make[2]: *** [Makefile:644: all] Error 2
>> >>> >make[2]:
>> >>> Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>> >>> >make[1]: *** [Makefile:419: all-recursive] Error 1
>> >>> >make[1]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release'
>> >>> >make: *** [Makefile:357: all] Error 2
>> >>> >
>> >>> >
>> >>> >gnuplot.exe was not built.
>> >>> >
>> >>> >
>> >>> >
>> >>> >Tatsuro
>> >>> >
>> >>> >
>> >>> >----- Original Message -----
>> >>> >>From: sfeam via gnuplot-beta <gnu...@li...>
>> >>>
>> >>To: gnuplot-beta <gnu...@li...>
>> >>> >>Date: 2017/8/14, Mon 07:25
>> >>> >>Subject: test-build tarball for gnuplot 5.0.7
>> >>> >>
>> >>> >>I have uploaded a tarball for 5.0.7 to the "5.0 Release Candidates"
>> >>> >>area on SourceForge.
>> >>> >>
>> >>> >>https://sourceforge.net/projects/gnuplot/files/gnuplot/5.0%20release%20candidates/
>> >>> >> gp507-buildtestonly.tar.gz
>> >>> >>
>> >>> >>Please use this only to test building and packaging on Windows
>> >>> >>or other platforms. I will wait for reports of success or problems
>> >>> >>before uploading an official
>> release of the 5.0.7 source tarball to
>> >>> >>its own separate release directory on
>> >>> SourceForge.
>> >>> >>
>> >>> >>gnuplot 5.0.7 will probably be the last release in the 5.0 series.
>> >>> >>After this we can concentrate attention on releasing 5.2 and
>> >>> >>continued development in 5.3.
>> >>> >>
>> >>> >> thanks for testing when you have time (there is no hurry)
>> >>> >>
>> >>> >> Ethan
>> >>> >>
>> >>> >>
>> >>> >>------------------------------------------------------------------------------
>> >>> >>Check out the vibrant tech community on one of the world's most
>> >>> >>engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> >>> >>_______________________________________________
>> >>> >>gnuplot-beta mailing
>> list
>> >>> >>gnu...@li...
>> >>> >>Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >
>> >>> >
>> >>
>> >>
>> >>
>> >
>> >
>
>
>
> |
|
From: Tatsuro M. <tma...@ya...> - 2017-08-16 08:03:52
|
I executed build tests on Cygwin 32 and 64 bit.
Build tests were successful for both Cygwin 32 and 64 bit.
Tatsuro
----- Original Message -----
>From: sfeam <sf...@us...>
>To: gnu...@li...; Tatsuro MATSUOKA <tma...@ya...>
>Date: 2017/8/16, Wed 14:00
>Subject: Release 5.0.7 [was: test-build tarball for gnuplot 5.0.7]
>
>On Tuesday, 15 August 2017 12:22:19 Tatsuro MATSUOKA wrote:
>> I have made changes in wxt_gui.cpp that you shown in patch on the mail on Aug 15 01:24:36 2017.
>>
>> The changes make 5.0.7 build (and make check) successful on Cygwin 64 bit.
>>
>> I do not why build was succeeded in 5.0.7 on Cygwin 32 bit without the change.
>
>Thank you for testing.
>Yes it is unexpected that the 32-bit build would work but not the 64-bit build.
>
>I have applied the patch to wxt_gui.cpp and uploaded the amended source tarball
>gnuplot-5.0.7.tar.gz to SourceForge. The only change from the testing tarball
>is the patch to wxt_gui.cpp and the "last modified" date in version.c
>
> here's to the final release in the 5.0 series!
>
> Ethan
>
>
>>
>> At least the note should be added for this build trouble, I think.
>>
>> Tatsuro
>>
>>
>>
>> ----- Original Message -----
>> >From: Tatsuro MATSUOKA <tma...@ya...>
>> >To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
>> >Date: 2017/8/15, Tue 10:18
>> >Subject: Re: test-build tarball for gnuplot 5.0.7
>> >
>> >
>> >Perhaps my writing led to confusion.
>> >
>> >For MinGW, there was no problems for 5.0.7 as written on 2017-08-14 05:06:37
>> >FYI, for native windows including MinGW build, wxWidgets does not use GTK but use the windows api functions.
>> >Therefore, GTK problems are not relevant to gnuplot for native windows.
>> >
>> >
>> >I reported the failure for the build in Cygwin but not MinGW.
>> >
>> >
>> >I have not built 5.0.x branches until 5.0.6 although I have been trying to build on cvs branch for a long time.
>> >
>> >The version 5.0.7 is a first try to build gnuplot for 5.0.x on Cygwin.
>> >
>> >However, like unixy platform, wxWidgets depends on GTK on Cygwin.
>> >
>> >As was done in linux, change of GTK2 to GTK3 happened to on Cygwin
>> >and wxWidgets was re-built against the GTK3.
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >----- Original Message -----
>> >>From: sfeam <sf...@us...>
>> >>To: gnu...@li...; Tatsuro MATSUOKA <tma...@ya...>
>> >>Date: 2017/8/15, Tue 01:24
>> >>Subject: Re: test-build tarball for gnuplot 5.0.7
>> >>
>> >>On Monday, 14 August 2017 19:22:44 Tatsuro MATSUOKA wrote:
>> >>> I note that I can build gnuplot 5.3 on cygwin 32 and 64 bit.
>> >>
>> >>The patch below was applied to 5.2/5.3 in January 2016 to address this issue.
>> >>It seemed at the time that this was not needed for 5.0 and indeed
>> >>there have been 4 releases 5.0.3 5.0.4 5.0.5 and 5.0.6 since then without it.
>> >>
>> >>Do you advise using the current code to release 5.0.7 mingw 32/64 bit builds
>> >>as we did for previous 5.0 versions?
>> >>Or would you prefer to apply the patch before releasing 5.0.7?
>> >>Does the patched version interfere with the raise console operation in your tests?
>> >>
>> >> Ethan
>> >>
>> >>--- wxt_gui.cpp 2015/09/01 00:02:44 1.151
>> >>+++ wxt_gui.cpp
>> 2016/01/04 22:47:18 1.152
>> >>@@ -1,5 +1,5 @@
>> >>/*
>> >>- * $Id: wxt_gui.cpp,v 1.151 2015/09/01 00:02:44 sfeam Exp $
>> >>+ * $Id: wxt_gui.cpp,v 1.152 2016/01/04 22:47:18 sfeam Exp $
>> >> */
>> >>
>> >>/* GNUPLOT - wxt_gui.cpp */
>> >>@@ -1466,7 +1466,7 @@
>> >> * to prevent focus stealing) and is inconsistent with global bindings mechanism ) */
>> >>void wxtPanel::RaiseConsoleWindow()
>> >>{
>> >>-#ifdef USE_GTK
>> >>+#if defined(USE_GTK) && (GTK_MAJOR_VERSION == 2)
>> >> char *window_env;
>> >> unsigned long windowid = 0;
>> >> /* retrieve XID of gnuplot window */
>> >>@@ -3167,7 +3167,7 @@
>> >> * Refresh() also must be called, otherwise
>> >> * the raise won't happen immediately */
>> >> window->frame->panel->Refresh(false);
>> >>-
>> gdk_window_raise(window->frame->GetHandle()->window);
>> >>+ gdk_window_raise(gtk_widget_get_window(window->frame->GetHandle()));
>> >>#else
>> >> window->frame->Restore();
>> >> window->frame->Raise();
>> >>@@ -3180,7 +3180,7 @@
>> >>{
>> >>#ifdef USE_GTK
>> >> window->frame->panel->Refresh(false);
>> >>- gdk_window_lower(window->frame->GetHandle()->window);
>> >>+ gdk_window_lower(gtk_widget_get_window(window->frame->GetHandle()));
>> >>#else
>> >> window->frame->Lower();
>> >>#endif /* USE_GTK */
>> >>
>> >>>
>> >>> Tatsuro
>> >>>
>> >>>
>> >>>
>> >>> ----- Original Message -----
>> >>> >From: Tatsuro MATSUOKA <tma...@ya...>
>> >>> >To: Merritt Ethan <sf...@us...>; gnu...@li...; tma...@ya...
>> >>> >Date: 2017/8/14, Mon 19:07
>> >>> >Subject: Re: test-build tarball for gnuplot 5.0.7
>> >>> >
>> >>> >
>> >>> >I tried to build 5.0.7 on the Cygwin 32 and 64 bits.
>> >>> >For 32 bit, build was in successful.
>> >>> >For 64 bit, build was in failure.
>> >>> >
>> >>> >
>> >>> >gcc -g -O2 -L/usr/local/lib -lcerf -o gnuplot_x11.exe gnuplot_x11-gplt_x11.o gnuplot_x11-gpexecute.o gnuplot_x11-getcolor.o
>> gnuplot_x11-version.o -lX11 -lcaca -lcerf -lz -lpangocairo-1.0 -lpango-1.0 -lgobject-2.0 -lcairo -lglib-2.0 -lintl
>> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In member function 'void wxtPanel::RaiseConsoleWindow()':
>> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:1552:51: error: 'gdk_window_foreign_new' was not declared in this scope
>> >>> >
>> >>> gdk_window_raise(gdk_window_foreign_new(windowid));
>> >>> > ^
>> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_raise_window(wxt_window_t*, bool)':
>> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3123:48: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
>> >>> >
>> gdk_window_raise(window->frame->GetHandle()->window);
>> >>> >
>> >>> ^
>> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp: In function 'void wxt_lower_window(wxt_window_t*)':
>> >>> >../../gnuplot-5.0.7/src/wxterminal/wxt_gui.cpp:3141:47: error: 'GtkWidget {aka struct _GtkWidget}' has no member named 'window'
>> >>> > gdk_window_lower(window->frame->GetHandle()->window);
>> >>> > ^
>> >>> >make[4]: *** [Makefile:984: wxterminal/wxt_gui.o] Error 1
>> >>> >make[4]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>> >>> >make[3]:
>> *** [Makefile:1027: all-recursive] Error 1
>> >>> >make[3]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>> >>> >make[2]: *** [Makefile:644: all] Error 2
>> >>> >make[2]:
>> >>> Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release/src'
>> >>> >make[1]: *** [Makefile:419: all-recursive] Error 1
>> >>> >make[1]: Leaving directory '/cygdrive/d/usr/Tatsu/cyg64work/gnuplot/5.0.7-test/build-release'
>> >>> >make: *** [Makefile:357: all] Error 2
>> >>> >
>> >>> >
>> >>> >gnuplot.exe was not built.
>> >>> >
>> >>> >
>> >>> >
>> >>> >Tatsuro
>> >>> >
>> >>> >
>> >>> >----- Original Message -----
>> >>> >>From: sfeam via gnuplot-beta <gnu...@li...>
>> >>>
>> >>To: gnuplot-beta <gnu...@li...>
>> >>> >>Date: 2017/8/14, Mon 07:25
>> >>> >>Subject: test-build tarball for gnuplot 5.0.7
>> >>> >>
>> >>> >>I have uploaded a tarball for 5.0.7 to the "5.0 Release Candidates"
>> >>> >>area on SourceForge.
>> >>> >>
>> >>> >>https://sourceforge.net/projects/gnuplot/files/gnuplot/5.0%20release%20candidates/
>> >>> >> gp507-buildtestonly.tar.gz
>> >>> >>
>> >>> >>Please use this only to test building and packaging on Windows
>> >>> >>or other platforms. I will wait for reports of success or problems
>> >>> >>before uploading an official
>> release of the 5.0.7 source tarball to
>> >>> >>its own separate release directory on
>> >>> SourceForge.
>> >>> >>
>> >>> >>gnuplot 5.0.7 will probably be the last release in the 5.0 series.
>> >>> >>After this we can concentrate attention on releasing 5.2 and
>> >>> >>continued development in 5.3.
>> >>> >>
>> >>> >> thanks for testing when you have time (there is no hurry)
>> >>> >>
>> >>> >> Ethan
>> >>> >>
>> >>> >>
>> >>> >>------------------------------------------------------------------------------
>> >>> >>Check out the vibrant tech community on one of the world's most
>> >>> >>engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> >>> >>_______________________________________________
>> >>> >>gnuplot-beta mailing
>> list
>> >>> >>gnu...@li...
>> >>> >>Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta
>> >>> >>
>> >>> >>
>> >>> >>
>> >>> >
>> >>> >
>> >>
>> >>
>> >>
>> >
>> >
>
>
>
> |
