Re: [Freedos-user] fdnet.bat

[<and...@ti...>]

  

Thanks for your interest:
this is what appears when I load my
ethernet packet driver:

_2 DRIVE(S) AVAILABLE. _
_NOVELL LINK SUPPORT
LAYER FOR DOS ODI V2.20 (960401) _
_(C) COPYRIGHT 1990 - 1996, BY
NOVELL, INC. ALL RIGHTS RESERVED. _

_BUFFERS 6 1600 _
_THE
CONFIGURATION FILE USED WAS "C:BROADCOMB44NET.CFG". _
_MAX BOARDS 4, MAX
STACKS 4 _
_BUFFERS 6, BUFFER SIZE 1600 BYTES, MEMORY POOL 0 BYTES.
_

_BROADCOM 440X 10/100 INTEGRATED CONTROLLER DOS ODI DRIVER V3.11
(050908) _
_COPYRIGHT (C) 2000-2005, BROADCOM CORPORATION. ALL RIGHTS
RESERVED. _
_DEVICE - BROADCOM 440X 10/100 INTEGRATED CONTROLLER, MAC
ADDRESS - 00C09F48F4DF_
_LINESPEED - 100MBPS FULLDUPLEX, IRQ - 6, BUSNUM
- 2, DEVNUM - 2 _

_BOARD 1, FRAME ETHERNET_II, LSB MODE _
_ODIPKT 3.1
_
_(C) COPYRIGHT DANIEL LANCIANI 1991-1996. ALL RIGHTS RESERVED. _
_THIS
SOFTWARE IS PROVIDED WITH NO WARRANTY. _
_USING ETHERNET FRAMING, CLASS
1 _
_REGISTERED AS HIGH PRIORITY CHAINED DEFAULT STACK _
_ODIPKT IS
INSTALLED AND READY._ 

All right. it works.

This is what happens when
I "add" fdnet bat:

_PACKET DRIVER SKELETON COPYRIGHT 1988-93, CRYNWR
SOFTWARE. _
_THIS PROGRAM IS FREELY COPYABLE; SOURCE MUST BE AVAILABLE;
NO WARRANTY. _
_SEE THE FILE COPYING.DOC FOR DETAILS; SEND FAX TO
+1-315-268-9201 FOR A COPY. _

_SYSTEM: [345]86 PROCESSOR, ISA BUS, TWO
8259S _
_PACKET DRIVER SOFTWARE INTERRUPT IS 0X60 (96) _
_INTERRUPT
NUMBER 0X5 (5) _
_I/O PORT 0X300 (768) _
_MY ETHERNET ADDRESS IS
FF:FF:FF:FF:FF:FF _
_MTCP DHCP CLIENT BY M BRUTMAN (MBB...@GM...)
(C)OPYRIGHT 2008-2013 _
_ VERSION: MAY 23 2013 _

_TIMEOUT PER REQUEST:
10 SECONDS, RETRY ATTEMPTS: 3 _
_SENDING DHCP REQUESTS, PRESS [ESC] TO
ABORT. _

_DHCP REQUEST SENT, ATTEMPT 1: TIMEOUT _
_DHCP REQUEST SENT,
ATTEMPT 2: TIMEOUT _
_DHCP REQUEST SENT, ATTEMPT 3: TIMEOUT _

_ERROR:
YOUR ETHERNET CARD REPORTED AN ERROR FOR EVERY PACKET WE SENT. _
_CHECK
YOUR CABLING AND PACKET DRIVER SETTINGS._ 

It is clear that ther's a
conflict, (and I don't know what it is) but other than that I am
doubtful that
fdnet .bat is useful for those who only use freedos and
not vb.
 regards, andrea

Il 15.03.2021 12:32 Dean Galloway ha scritto:


> Hello Andrea, 
> 
> Perhaps you can post some screenshots of the
messages you are receiving when the packet driver loads? 
> 
> Thanks,
>
Dean. 
> On 3/15/2021 12:28 AM, and...@ti... [4] wrote: 
> 
>>
HI AT ALL 
>> IN FREEDOS1.3 THERE IS IN C:/FDOS/BIN THE PROGRAM
FDNET.BAT. OK: WIKI.FREDOS.ORG EXPLAINS THAT IT IS A PROGRAM FOR
VIRTUALBOX, AND THAT IN CASE YOU HAVE A FREEDOS WITHOUT VIRTUALBOX YOU
HAVE TO WRITE A LINE FIRST WITH YOUR ETHERNET PACKET DRIVER.
>> Well, i
don't have virtualbox and i don't understand why i have to load my
packet driver in autoexec.bat (or fdauto, bat.) I prefer to load and
unload it according to memory needs, time by time. 
>> Good. however i
tried to add my packet driver to my autoexet.bat right before on the
line produced by fdnet.bat .
>> It don't work. 
>> Responds: _dhcp
request send:error, your ethernet card report an error for every packet
sent.Check your cablin ecc...._
>> and my Ethernet card driver don't
work too; then I've to delete all the last line on my autoexec.bat ( and
reload my ethernet packet driver)to go on line. 
>> 
>> ANDREA 
>> 
>>
Con Tiscali Mobile Smart 30 4G hai minuti illimitati, 100 SMS e 30 Giga
in 4G a soli 8,99EUR al mese. http://tisca.li/smart30 [1]
>> 
>>
_______________________________________________
>> Freedos-user mailing
list
>> Fre...@li... [2]
>>
https://lists.sourceforge.net/lists/listinfo/freedos-user [3]
 



Con Tiscali Mobile Smart 30 4G hai minuti illimitati, 100 SMS e 30 Giga in 4G a soli 8,99€ al mese. http://tisca.li/smart30