basilisk-devel — Basilisk II development-related discussion

[B2-devel] Print from Mac within Balilisk

[Scott O'B. <kin...@gm...>]

Hi all.

I've got some ancient old Claris works 4.0 documents, and it looks weird
when opening them from within Appleworks.  I don't want to move over to
Appleworks yet however and am still happy using Claris works.  My printer
died the other week though, and I havn't been able to replace it, so I went
out and bought a new Intel Imac, but Claris works 4.0 no longer works on it
(no supprise there.)

Is there a way to add my new printer to be printed via some PostScript
drivers or something?  Is this implemented in Balilisk.  Your help is much
appreciated, Thanks

Re: [B2-devel] basilisk-devel Digest, Vol 5, Issue 1

[Nigel P. <ni...@in...>]

> Date: Fri, 3 Nov 2006 20:14:13 -0800 (PST)
> From: Pomeroy Lab <ad...@mi...>
> Subject: [B2-devel] Mac problem
>
> Ok First of all I don't know why it says can not open /dev/ 
> sheep_net no such file or directory ethernet will not be available.  
> I click ok and it just exits.

That would be because there is no sheep_net device on OS X.
Try putting slirp in the EtherNet interface field instead.

--
Nigel Pearson, ni...@in...|"In this city I confess
Telstra Net. Eng., Sydney, Australia | god is mammon, more is less
Office: 9202 3900    Fax:  9261 3912 | off like lemmings at the gun
Mobile: 0408 664435  Home: 9792 6998 | I know better, still I run"

[B2-devel] Mac problem

[Pomeroy L. <ad...@mi...>]

Ok First of all I don't know why it says can not open /dev/sheep_net no such file or directory ethernet will not be available. I click ok and it just exits.

bas...@li... wrote: Welcome to the bas...@li... mailing list!

To post to this list, send your email to:

  bas...@li...

General information about the mailing list is at:

  https://lists.sourceforge.net/lists/listinfo/basilisk-devel

If you ever want to unsubscribe or change your options (eg, switch to
or from digest mode, change your password, etc.), visit your
subscription page at:

  https://lists.sourceforge.net/lists/options/basilisk-devel/admin%40mindblowingidea.com


You can also make such adjustments via email by sending a message to:

  bas...@li...

with the word `help' in the subject or body (don't include the
quotes), and you will get back a message with instructions.

You must know your password to change your options (including changing
the password, itself) or to unsubscribe.  It is:

  KnowJesus

Normally, Mailman will remind you of your lists.sourceforge.net
mailing list passwords once every month, although you can disable this
if you prefer.  This reminder will also include instructions on how to
unsubscribe or change your account options.  There is also a button on
your options page that will email your current password to you.

[B2-devel] HELP!

[Pomeroy L. <ad...@mi...>]

Ok I followed your instructions here:

Anonymous CVS access    Because SheepShaver shares a lot of source files with  Basilisk II, you also need to checkout the  Basilisk II sources.  
    To download the current version of the sources via CVS:  
 
$ cvs -d :pserver:an...@cv...:/home/cvs/cebix login

 (password is "anoncvs") 
$ cvs -d :pserver:an...@cv...:/home/cvs/cebix checkout BasiliskII
$ cvs -d :pserver:an...@cv...:/home/cvs/cebix checkout SheepShaver
$ cd SheepShaver
$ make links

    You can then try to compile the program with  
 
$ cd src/Unix
$ ./autogen.sh
$ make

    under Linux, or  
 
$ cd src/BeOS
$ make

    under BeOS.  


I am using Fedora Core 6 32 bit version on a 64 bit PC.
 
Here is what I did. 
[root@207-109-183-73 ~]# cvs -d :pserver:an...@cv...:/home/cvs/cebix checkout SheepShaver
cvs checkout: Updating SheepShaver
U SheepShaver/COPYING
U SheepShaver/Makefile
U SheepShaver/NEWS
cvs checkout: Updating SheepShaver/doc
cvs checkout: Updating SheepShaver/doc/BeOS
U SheepShaver/doc/BeOS/acknowledgements.html
U SheepShaver/doc/BeOS/contact.html
U SheepShaver/doc/BeOS/graphics.gif
U SheepShaver/doc/BeOS/history.html
U SheepShaver/doc/BeOS/icon.gif
U SheepShaver/doc/BeOS/iconsmall.gif
U SheepShaver/doc/BeOS/index.html
U SheepShaver/doc/BeOS/installation.html
U SheepShaver/doc/BeOS/introduction.html
U SheepShaver/doc/BeOS/memory.gif
U SheepShaver/doc/BeOS/quickstart.html
U SheepShaver/doc/BeOS/serial.gif
U SheepShaver/doc/BeOS/settings.html
U SheepShaver/doc/BeOS/troubleshooting.html
U SheepShaver/doc/BeOS/using.html
U SheepShaver/doc/BeOS/volumes.gif
cvs checkout: Updating SheepShaver/doc/Linux
U SheepShaver/doc/Linux/acknowledgements.html
U SheepShaver/doc/Linux/contact.html
U SheepShaver/doc/Linux/graphics.gif
U SheepShaver/doc/Linux/history.html
U SheepShaver/doc/Linux/icon.gif
U SheepShaver/doc/Linux/iconsmall.gif
U SheepShaver/doc/Linux/index.html
U SheepShaver/doc/Linux/installation.html
U SheepShaver/doc/Linux/introduction.html
U SheepShaver/doc/Linux/memory.gif
U SheepShaver/doc/Linux/quickstart.html
U SheepShaver/doc/Linux/serial.gif
U SheepShaver/doc/Linux/settings.html
U SheepShaver/doc/Linux/troubleshooting.html
U SheepShaver/doc/Linux/using.html
U SheepShaver/doc/Linux/volumes.gif
cvs checkout: Updating SheepShaver/src
U SheepShaver/src/EthernetDriverFull.i
U SheepShaver/src/EthernetDriverStub.i
U SheepShaver/src/VideoDriverStub.i
U SheepShaver/src/emul_op.cpp
U SheepShaver/src/ether.cpp
U SheepShaver/src/gfxaccel.cpp
U SheepShaver/src/macos_util.cpp
U SheepShaver/src/main.cpp
U SheepShaver/src/name_registry.cpp
U SheepShaver/src/prefs_items.cpp
U SheepShaver/src/rom_patches.cpp
U SheepShaver/src/rsrc_patches.cpp
U SheepShaver/src/serial.cpp
U SheepShaver/src/thunks.cpp
U SheepShaver/src/timer.cpp
U SheepShaver/src/user_strings.cpp
U SheepShaver/src/video.cpp
cvs checkout: Updating SheepShaver/src/BeOS
U SheepShaver/src/BeOS/Makefile
U SheepShaver/src/BeOS/SheepShaver.rsrc
U SheepShaver/src/BeOS/about_window_beos.cpp
U SheepShaver/src/BeOS/clip_beos.cpp
U SheepShaver/src/BeOS/ether_beos.cpp
U SheepShaver/src/BeOS/main_beos.cpp
U SheepShaver/src/BeOS/prefs_beos.cpp
U SheepShaver/src/BeOS/prefs_editor_beos.cpp
U SheepShaver/src/BeOS/sysdeps.h
U SheepShaver/src/BeOS/user_strings_beos.cpp
U SheepShaver/src/BeOS/user_strings_beos.h
U SheepShaver/src/BeOS/video_beos.cpp
U SheepShaver/src/BeOS/video_screen.h
U SheepShaver/src/BeOS/video_window.h
cvs checkout: Updating SheepShaver/src/BeOS/CreatePCIDrivers
U SheepShaver/src/BeOS/CreatePCIDrivers/Ethernet.cpp
U SheepShaver/src/BeOS/CreatePCIDrivers/Makefile
U SheepShaver/src/BeOS/CreatePCIDrivers/Video.cpp
U SheepShaver/src/BeOS/CreatePCIDrivers/hexconv.cpp
cvs checkout: Updating SheepShaver/src/BeOS/NetPeek
U SheepShaver/src/BeOS/NetPeek/Makefile
U SheepShaver/src/BeOS/NetPeek/NetPeek.cpp
cvs checkout: Updating SheepShaver/src/BeOS/SaveROM
U SheepShaver/src/BeOS/SaveROM/Makefile
U SheepShaver/src/BeOS/SaveROM/README
U SheepShaver/src/BeOS/SaveROM/SaveROM.cpp
U SheepShaver/src/BeOS/SaveROM/SaveROM.rsrc
cvs checkout: Updating SheepShaver/src/MacOSX
U SheepShaver/src/MacOSX/Info.plist.in
U SheepShaver/src/MacOSX/SheepShaver.icns
cvs checkout: Updating SheepShaver/src/Unix
U SheepShaver/src/Unix/Makefile.in
U SheepShaver/src/Unix/SheepShaver.1
U SheepShaver/src/Unix/about_window_unix.cpp
U SheepShaver/src/Unix/autogen.sh
U SheepShaver/src/Unix/configure.ac
U SheepShaver/src/Unix/install-sh
U SheepShaver/src/Unix/main_unix.cpp
U SheepShaver/src/Unix/mkinstalldirs
U SheepShaver/src/Unix/paranoia.cpp
U SheepShaver/src/Unix/ppc_asm.S
U SheepShaver/src/Unix/ppc_asm.tmpl
U SheepShaver/src/Unix/prefs_editor_gtk.cpp
U SheepShaver/src/Unix/prefs_unix.cpp
U SheepShaver/src/Unix/sigregs.h
U SheepShaver/src/Unix/sysdeps.h
U SheepShaver/src/Unix/user_strings_unix.cpp
U SheepShaver/src/Unix/user_strings_unix.h
U SheepShaver/src/Unix/video_x.cpp
cvs checkout: Updating SheepShaver/src/Unix/Darwin
cvs checkout: Updating SheepShaver/src/Unix/Irix
cvs checkout: Updating SheepShaver/src/Unix/Linux
U SheepShaver/src/Unix/Linux/sheepthreads.c
cvs checkout: Updating SheepShaver/src/Unix/NetBSD
U SheepShaver/src/Unix/NetBSD/sheepthreads.c
cvs checkout: Updating SheepShaver/src/Windows
U SheepShaver/src/Windows/Makefile.in
U SheepShaver/src/Windows/SheepShaver.ico
U SheepShaver/src/Windows/SheepShaver.rc
U SheepShaver/src/Windows/SheepShaverGUI.ico
U SheepShaver/src/Windows/SheepShaverGUI.rc
U SheepShaver/src/Windows/about_window_windows.cpp
U SheepShaver/src/Windows/configure.ac
U SheepShaver/src/Windows/main_windows.cpp
U SheepShaver/src/Windows/prefs_windows.cpp
U SheepShaver/src/Windows/sysdeps.h
U SheepShaver/src/Windows/user_strings_windows.cpp
U SheepShaver/src/Windows/user_strings_windows.h
cvs checkout: Updating SheepShaver/src/dummy
U SheepShaver/src/dummy/ether_dummy.cpp
cvs checkout: Updating SheepShaver/src/emul_ppc
U SheepShaver/src/emul_ppc/emul_ppc.cpp
cvs checkout: Updating SheepShaver/src/include
U SheepShaver/src/include/about_window.h
U SheepShaver/src/include/cpu_emulation.h
U SheepShaver/src/include/emul_op.h
U SheepShaver/src/include/ether.h
U SheepShaver/src/include/ether_defs.h
U SheepShaver/src/include/macos_util.h
U SheepShaver/src/include/main.h
U SheepShaver/src/include/name_registry.h
U SheepShaver/src/include/prefs_editor.h
U SheepShaver/src/include/rom_patches.h
U SheepShaver/src/include/rsrc_patches.h
U SheepShaver/src/include/thunks.h
U SheepShaver/src/include/user_strings.h
U SheepShaver/src/include/version.h
U SheepShaver/src/include/video.h
U SheepShaver/src/include/video_defs.h
U SheepShaver/src/include/xlowmem.h
cvs checkout: Updating SheepShaver/src/kpx_cpu
U SheepShaver/src/kpx_cpu/sheepshaver_glue.cpp
cvs checkout: Updating SheepShaver/src/kpx_cpu/include
U SheepShaver/src/kpx_cpu/include/a.out-defs.h
U SheepShaver/src/kpx_cpu/include/basic-blockinfo.hpp
U SheepShaver/src/kpx_cpu/include/basic-cpu.hpp
U SheepShaver/src/kpx_cpu/include/basic-plugin.hpp
U SheepShaver/src/kpx_cpu/include/block-alloc.hpp
U SheepShaver/src/kpx_cpu/include/elf-defs.h
U SheepShaver/src/kpx_cpu/include/nvmemfun.hpp
U SheepShaver/src/kpx_cpu/include/task-plugin.hpp
cvs checkout: Updating SheepShaver/src/kpx_cpu/src
cvs checkout: Updating SheepShaver/src/kpx_cpu/src/cpu
U SheepShaver/src/kpx_cpu/src/cpu/block-cache.hpp
U SheepShaver/src/kpx_cpu/src/cpu/spcflags.hpp
U SheepShaver/src/kpx_cpu/src/cpu/vm.hpp
cvs checkout: Updating SheepShaver/src/kpx_cpu/src/cpu/jit
U SheepShaver/src/kpx_cpu/src/cpu/jit/basic-dyngen-ops.cpp
U SheepShaver/src/kpx_cpu/src/cpu/jit/basic-dyngen.cpp
U SheepShaver/src/kpx_cpu/src/cpu/jit/basic-dyngen.hpp
U SheepShaver/src/kpx_cpu/src/cpu/jit/cxxdemangle.cpp
U SheepShaver/src/kpx_cpu/src/cpu/jit/cxxdemangle.h
U SheepShaver/src/kpx_cpu/src/cpu/jit/dyngen-exec.h
U SheepShaver/src/kpx_cpu/src/cpu/jit/dyngen.c
U SheepShaver/src/kpx_cpu/src/cpu/jit/jit-cache.cpp
U SheepShaver/src/kpx_cpu/src/cpu/jit/jit-cache.hpp
U SheepShaver/src/kpx_cpu/src/cpu/jit/jit-codegen.hpp
U SheepShaver/src/kpx_cpu/src/cpu/jit/jit-config.hpp
U SheepShaver/src/kpx_cpu/src/cpu/jit/jit-target-dispatch.h
cvs checkout: Updating SheepShaver/src/kpx_cpu/src/cpu/jit/amd64
U SheepShaver/src/kpx_cpu/src/cpu/jit/amd64/dyngen-target-exec.h
U SheepShaver/src/kpx_cpu/src/cpu/jit/amd64/jit-target-cache.hpp
U SheepShaver/src/kpx_cpu/src/cpu/jit/amd64/jit-target-codegen.hpp
cvs checkout: Updating SheepShaver/src/kpx_cpu/src/cpu/jit/dummy
U SheepShaver/src/kpx_cpu/src/cpu/jit/dummy/jit-target-cache.hpp
cvs checkout: Updating SheepShaver/src/kpx_cpu/src/cpu/jit/mips
U SheepShaver/src/kpx_cpu/src/cpu/jit/mips/dyngen-target-exec.h
U SheepShaver/src/kpx_cpu/src/cpu/jit/mips/jit-target-cache.hpp
cvs checkout: Updating SheepShaver/src/kpx_cpu/src/cpu/jit/ppc
U SheepShaver/src/kpx_cpu/src/cpu/jit/ppc/dyngen-target-exec.h
U SheepShaver/src/kpx_cpu/src/cpu/jit/ppc/jit-target-cache.hpp
cvs checkout: Updating SheepShaver/src/kpx_cpu/src/cpu/jit/x86
U SheepShaver/src/kpx_cpu/src/cpu/jit/x86/dyngen-target-exec.h
U SheepShaver/src/kpx_cpu/src/cpu/jit/x86/jit-target-cache.hpp
U SheepShaver/src/kpx_cpu/src/cpu/jit/x86/jit-target-codegen.hpp
cvs checkout: Updating SheepShaver/src/kpx_cpu/src/cpu/ppc
U SheepShaver/src/kpx_cpu/src/cpu/ppc/genexec.pl
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-bitfields.hpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-blockinfo.hpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-config.hpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-cpu.cpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-cpu.hpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-decode.cpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-dyngen-ops.cpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-dyngen.cpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-dyngen.hpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-execute.cpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-execute.hpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-instructions.hpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-jit.cpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-jit.hpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-operands.hpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-operations.hpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-registers.hpp
U SheepShaver/src/kpx_cpu/src/cpu/ppc/ppc-translate.cpp
cvs checkout: Updating SheepShaver/src/kpx_cpu/src/mathlib
U SheepShaver/src/kpx_cpu/src/mathlib/ieeefp-i386.cpp
U SheepShaver/src/kpx_cpu/src/mathlib/ieeefp-i386.hpp
U SheepShaver/src/kpx_cpu/src/mathlib/ieeefp-mips.hpp
U SheepShaver/src/kpx_cpu/src/mathlib/ieeefp.cpp
U SheepShaver/src/kpx_cpu/src/mathlib/ieeefp.hpp
U SheepShaver/src/kpx_cpu/src/mathlib/mathlib-i386.cpp
U SheepShaver/src/kpx_cpu/src/mathlib/mathlib-i386.hpp
U SheepShaver/src/kpx_cpu/src/mathlib/mathlib-ppc.hpp
U SheepShaver/src/kpx_cpu/src/mathlib/mathlib-x86_64.hpp
U SheepShaver/src/kpx_cpu/src/mathlib/mathlib.cpp
U SheepShaver/src/kpx_cpu/src/mathlib/mathlib.hpp
cvs checkout: Updating SheepShaver/src/kpx_cpu/src/test
U SheepShaver/src/kpx_cpu/src/test/test-powerpc.cpp
cvs checkout: Updating SheepShaver/src/kpx_cpu/src/utils
U SheepShaver/src/kpx_cpu/src/utils/utils-cpuinfo.cpp
U SheepShaver/src/kpx_cpu/src/utils/utils-cpuinfo.hpp
U SheepShaver/src/kpx_cpu/src/utils/utils-sentinel.hpp
[root@207-109-183-73 ~]# cd SheepShaver
[root@207-109-183-73 SheepShaver]# make links
adb.cpp
audio.cpp
cdrom.cpp
disk.cpp
extfs.cpp
prefs.cpp
\
scsi.cpp
sony.cpp
xpram.cpp
\
include/adb.h
include/audio.h
include/audio_defs.h
\
include/cdrom.h
include/clip.h
include/debug.h
include/disk.h
\
include/extfs.h
include/extfs_defs.h
include/prefs.h
\
include/scsi.h
include/serial.h
include/serial_defs.h
\
include/sony.h
include/sys.h
include/timer.h
include/xpram.h
\
BeOS/audio_beos.cpp
BeOS/extfs_beos.cpp
BeOS/scsi_beos.cpp
\
BeOS/serial_beos.cpp
BeOS/sys_beos.cpp
BeOS/timer_beos.cpp
\
BeOS/xpram_beos.cpp
BeOS/SheepDriver
BeOS/SheepNet
\
Unix/audio_oss_esd.cpp
Unix/extfs_unix.cpp
Unix/serial_unix.cpp
\
Unix/sshpty.h
Unix/sshpty.c
Unix/strlcpy.h
Unix/strlcpy.c
\
Unix/sys_unix.cpp
Unix/timer_unix.cpp
Unix/xpram_unix.cpp
\
Unix/sigsegv.h
Unix/sigsegv.cpp
Unix/vm_alloc.h
Unix/vm_alloc.cpp
\
Unix/semaphore.h
Unix/posix_sem.cpp
Unix/video_vosf.h
Unix/video_blit.h
\
Unix/video_blit.cpp
Unix/config.sub
Unix/config.guess
Unix/m4
\
Unix/keycodes
Unix/tunconfig
Unix/clip_unix.cpp
Unix/Irix/audio_irix.cpp
\
Unix/Linux/scsi_linux.cpp
Unix/Linux/NetDriver
Unix/ether_unix.cpp
\
Unix/rpc.h
Unix/rpc_unix.cpp
Unix/ldscripts
Unix/Darwin/mkstandalone
\
Unix/Darwin/lowmem.c
Unix/Darwin/pagezero.c
Unix/Darwin/testlmem.sh
\
dummy/audio_dummy.cpp
dummy/clip_dummy.cpp
dummy/serial_dummy.cpp
\
dummy/prefs_editor_dummy.cpp
dummy/scsi_dummy.cpp
SDL
slirp
\
MacOSX/sys_darwin.cpp
MacOSX/clip_macosx.cpp
\
MacOSX/macos_util_macosx.h
MacOSX/extfs_macosx.h
\
MacOSX/extfs_macosx.mm
Windows/clip_windows.cpp
\
Windows/cd_defs.h
Windows/cdenable
Windows/extfs_windows.cpp
\
Windows/posix_emu.cpp
Windows/posix_emu.h
Windows/sys_windows.cpp
\
Windows/timer_windows.cpp
Windows/util_windows.cpp
\
Windows/util_windows.h
Windows/xpram_windows.cpp
\
Windows/kernel_windows.h
Windows/kernel_windows.cpp
\
Windows/serial_windows.cpp
Windows/router
Windows/b2ether
\
Windows/ether_windows.h
Windows/ether_windows.cpp
\
Windows/serial_windows.cpp
Windows/prefs_editor_gtk.cpp
\
uae_cpu/compiler/codegen_x86.h
[root@207-109-183-73 SheepShaver]# 
[root@207-109-183-73 SheepShaver]# cd src/Unix
[root@207-109-183-73 Unix]# ./autogen.sh
 + Running aclocal: aclocal:configure.ac:267: warning: macro `AM_PATH_GTK' not found in library
done.
 + Running autoheader: done.
 + Running autoconf: configure.ac:121: error: possibly undefined macro: AC_MSG_WARN
      If this token and others are legitimate, please use m4_pattern_allow.
      See the Autoconf documentation.
configure.ac:267: error: possibly undefined macro: AM_PATH_GTK
done.
 + Running 'configure ':
   ** If you wish to pass arguments to ./configure, please
   ** specify them on the command line.
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether make sets $(MAKE)... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for egrep... grep -E
checking for file... /usr/bin/file
checking for perl... /usr/bin/perl
checking for PowerPC target CPU... no
checking for mon... no
configure: WARNING: Could not find mon, ignoring --with-mon.
checking for sem_init in -lposix4... no
checking for cos in -lm... yes
checking for X... libraries , headers 
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for pthread_create in -lpthread... yes
checking for pthread_cancel... yes
checking for pthread_cond_init... yes
checking for pthread_testcancel... yes
checking for pthread_mutexattr_setprotocol... yes
checking for pthread_mutexattr_settype... yes
checking for pthread_mutexattr_setpshared... yes
checking for sem_init... yes
checking linux/fb.h usability... yes
checking linux/fb.h presence... yes
checking for linux/fb.h... yes
checking for XF86DGAQueryExtension in -lXxf86dga... yes
checking for XF86VidModeQueryExtension in -lXxf86vm... yes
checking for pkg-config... /usr/bin/pkg-config
checking for GTK+ - version >= 1.3.15... yes (version 2.10.4)
./configure: line 7456: syntax error near unexpected token `1.2.0,'
./configure: line 7456: `  AM_PATH_GTK(1.2.0,'
[root@207-109-183-73 Unix]# make
make: *** No targets specified and no makefile found.  Stop.
[root@207-109-183-73 Unix]# dir
about_window_unix.cpp  ldscripts             sigsegv.cpp
aclocal.m4             Linux                 sigsegv.h
audio_oss_esd.cpp      m4                    sshpty.c
autogen.sh             main_unix.cpp         sshpty.h
autom4te.cache         Makefile.in           strlcpy.c
clip_unix.cpp          mkinstalldirs         strlcpy.h
config.guess           NetBSD                sysdeps.h
config.h.in            paranoia.cpp          sys_unix.cpp
config.log             posix_sem.cpp         timer_unix.cpp
config.sub             ppc_asm.S             tunconfig
configure              ppc_asm.tmpl          user_strings_unix.cpp
configure.ac           prefs_editor_gtk.cpp  user_strings_unix.h
CVS                    prefs_unix.cpp        video_blit.cpp
Darwin                 rpc.h                 video_blit.h
ether_unix.cpp         rpc_unix.cpp          video_vosf.h
extfs_unix.cpp         semaphore.h           video_x.cpp
install-sh             serial_unix.cpp       vm_alloc.cpp
Irix                   SheepShaver.1         vm_alloc.h
keycodes               sigregs.h             xpram_unix.cpp
[root@207-109-183-73 Unix]# ./Makefile.in
-bash: ./Makefile.in: Permission denied
[root@207-109-183-73 Unix]# cd SheepShaver
-bash: cd: SheepShaver: No such file or directory
[root@207-109-183-73 Unix]# cd src
-bash: cd: src: No such file or directory
[root@207-109-183-73 Unix]# cd src/Unix
-bash: cd: src/Unix: No such file or directory
[root@207-109-183-73 Unix]# dir
about_window_unix.cpp  ldscripts             sigsegv.cpp
aclocal.m4             Linux                 sigsegv.h
audio_oss_esd.cpp      m4                    sshpty.c
autogen.sh             main_unix.cpp         sshpty.h
autom4te.cache         Makefile.in           strlcpy.c
clip_unix.cpp          mkinstalldirs         strlcpy.h
config.guess           NetBSD                sysdeps.h
config.h.in            paranoia.cpp          sys_unix.cpp
config.log             posix_sem.cpp         timer_unix.cpp
config.sub             ppc_asm.S             tunconfig
configure              ppc_asm.tmpl          user_strings_unix.cpp
configure.ac           prefs_editor_gtk.cpp  user_strings_unix.h
CVS                    prefs_unix.cpp        video_blit.cpp
Darwin                 rpc.h                 video_blit.h
ether_unix.cpp         rpc_unix.cpp          video_vosf.h
extfs_unix.cpp         semaphore.h           video_x.cpp
install-sh             serial_unix.cpp       vm_alloc.cpp
Irix                   SheepShaver.1         vm_alloc.h
keycodes               sigregs.h             xpram_unix.cpp
[root@207-109-183-73 Unix]# make
make: *** No targets specified and no makefile found.  Stop.
[root@207-109-183-73 Unix]# make
make: *** No targets specified and no makefile found.  Stop.
[root@207-109-183-73 Unix]# su -
[root@207-109-183-73 ~]# cd SheepShaver
[root@207-109-183-73 SheepShaver]# Makefile
-bash: Makefile: command not found
[root@207-109-183-73 SheepShaver]# dir
COPYING  CVS  doc  Makefile  NEWS  src
[root@207-109-183-73 SheepShaver]# ./Makefile
-bash: ./Makefile: Permission denied
[root@207-109-183-73 SheepShaver]# 

[B2-devel] SheepShaver on OS X 10.4 Compiling and Parental Controls

[Ben S. <bst...@ya...>]

Date/Time:      2006-11-03 17:08:51.260 -0600
OS Version:     10.4.8 (Build 8L127)
Report Version: 4

Command: SheepShaver
Path:    /Applications/Sheep Shaver/SheepShaver.app/Contents/MacOS/SheepShaver
Parent:  WindowServer [62]

Version: ??? (2.3)

PID:    12621
Thread: 0

Exception:  EXC_BAD_ACCESS (0x0001)
Codes:      KERN_PROTECTION_FAILURE (0x0002) at 0x058e6000

Thread 0 Crashed:
0   com.madeup.sheepshaver    	0x7806dff0 catch_exception_raise + 11568
1   com.madeup.sheepshaver    	0x7806f494 catch_exception_raise + 16852
2   com.madeup.sheepshaver    	0x7806fdfc catch_exception_raise + 19260
3   com.madeup.sheepshaver    	0x78070650 catch_exception_raise + 21392
4   com.madeup.sheepshaver    	0x78049e60 0x78048000 + 7776
5   com.madeup.sheepshaver    	0x7804acf0 0x78048000 + 11504
6   com.madeup.sheepshaver    	0x780831f0 catch_exception_raise + 98096
7   com.apple.Foundation      	0x9295cad8 _nsnote_callback + 180
8   com.apple.CoreFoundation  	0x90804010 __CFXNotificationPost + 368
9   com.apple.CoreFoundation  	0x907fc0ec _CFXNotificationPostNotification + 684
10  com.apple.Foundation      	0x92946ee0 -[NSNotificationCenter postNotificationName:object:userInfo:] + 92
11  com.apple.AppKit          	0x9372df98 -[NSApplication _postDidFinishNotification] + 112
12  com.apple.AppKit          	0x9372de84 -[NSApplication _sendFinishLaunchingNotification] + 92
13  com.apple.AppKit          	0x9372d9cc -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 264
14  com.apple.AppKit          	0x9372d574 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 92
15  com.apple.Foundation      	0x9295dae4 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 380
16  com.apple.Foundation      	0x9295d944 _NSAppleEventManagerGenericHandler + 92
17  com.apple.AE              	0x914fa960 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 208
18  com.apple.AE              	0x914fa7fc dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 44
19  com.apple.AE              	0x914fa654 aeProcessAppleEvent + 284
20  com.apple.HIToolbox       	0x93205eb0 AEProcessAppleEvent + 60
21  com.apple.AppKit          	0x9372bcbc _DPSNextEvent + 856
22  com.apple.AppKit          	0x9372b7a8 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
23  com.apple.AppKit          	0x93727cec -[NSApplication run] + 472
24  com.madeup.sheepshaver    	0x78083178 catch_exception_raise + 97976
25  com.madeup.sheepshaver    	0x780833b4 catch_exception_raise + 98548
26  com.madeup.sheepshaver    	0x78049a18 0x78048000 + 6680
27  com.madeup.sheepshaver    	0x78049898 0x78048000 + 6296

Thread 1:
0   libSystem.B.dylib         	0x9000ab48 mach_msg_trap + 8
1   libSystem.B.dylib         	0x9000aa9c mach_msg + 60
2   com.apple.CoreFoundation  	0x907dcb78 __CFRunLoopRun + 832
3   com.apple.CoreFoundation  	0x907dc47c CFRunLoopRunSpecific + 268
4   com.apple.CoreFoundation  	0x907eb8dc CFRunLoopRun + 52
5   com.madeup.sheepshaver    	0x78076a80 catch_exception_raise + 47040
6   libSystem.B.dylib         	0x9002b508 _pthread_body + 96

Thread 2:
0   libSystem.B.dylib         	0x9000ab48 mach_msg_trap + 8
1   libSystem.B.dylib         	0x9000aa9c mach_msg + 60
2   com.apple.CoreFoundation  	0x907dcb78 __CFRunLoopRun + 832
3   com.apple.CoreFoundation  	0x907dc47c CFRunLoopRunSpecific + 268
4   com.apple.audio.CoreAudio 	0x9145363c HALRunLoop::OwnThread(void*) + 264
5   com.apple.audio.CoreAudio 	0x914533dc CAPThread::Entry(CAPThread*) + 96
6   libSystem.B.dylib         	0x9002b508 _pthread_body + 96

Thread 3:
0   libSystem.B.dylib         	0x90054ae8 semaphore_timedwait_signal_trap + 8
1   libSystem.B.dylib         	0x90071168 pthread_cond_timedwait_relative_np + 556
2   com.apple.audio.CoreAudio 	0x91464794 CAGuard::WaitFor(unsigned long long) + 204
3   com.apple.audio.CoreAudio 	0x914646a4 CAGuard::WaitUntil(unsigned long long) + 304
4   com.apple.audio.CoreAudio 	0x914628e8 HP_IOThread::WorkLoop() + 852
5   com.apple.audio.CoreAudio 	0x91462580 HP_IOThread::ThreadEntry(HP_IOThread*) + 16
6   com.apple.audio.CoreAudio 	0x914533dc CAPThread::Entry(CAPThread*) + 96
7   libSystem.B.dylib         	0x9002b508 _pthread_body + 96

Thread 4:
0   libSystem.B.dylib         	0x9001f08c select + 12
1   com.madeup.sheepshaver    	0x78074d4c catch_exception_raise + 39564
2   libSystem.B.dylib         	0x9002b508 _pthread_body + 96

Thread 5:
0   libSystem.B.dylib         	0x9001f08c select + 12
1   com.madeup.sheepshaver    	0x78074ca0 catch_exception_raise + 39392
2   libSystem.B.dylib         	0x9002b508 _pthread_body + 96

Thread 0 crashed with PPC Thread State 64:
  srr0: 0x000000007806dff0 srr1: 0x000000000200f930                        vrsave: 0x0000000000000000
    cr: 0x82002222          xer: 0x0000000000000007   lr: 0x000000007806dfa4  ctr: 0x0000000090004b40
    r0: 0x0000000000001000   r1: 0x00000000bfffdd30   r2: 0x00000000454bcc02   r3: 0x00000000058e6000
    r4: 0x00000000d1bc0810   r5: 0x0000000000000000   r6: 0x0000000000034150   r7: 0x000000000004215f
    r8: 0x00000000d1b8c6c0   r9: 0x0000000000000000  r10: 0x0000000000034150  r11: 0x00000000058e6000
   r12: 0x00000000000f4240  r13: 0x0000000000000000  r14: 0x0000000000000000  r15: 0x0000000000000000
   r16: 0x0000000000000000  r17: 0x0000000000000000  r18: 0x000000000030e950  r19: 0x000000000030e8f0
   r20: 0x00000000bfffdd80  r21: 0x0000000000000000  r22: 0x00000000780e30e4  r23: 0x0000000000000000
   r24: 0x00000000bfffdd70  r25: 0x0000000000000000  r26: 0x00000000780e30e4  r27: 0x000000000004215f
   r28: 0x00000000d1bc0810  r29: 0x00000000780e30e4  r30: 0x00000000780e30e4  r31: 0x0000000000000000

Binary Images Description:
 0x172d000 -  0x172efff com.apple.aoa.halplugin 2.5.6 (2.5.6b5)	/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bundle/Contents/MacOS/AOAHALPlugin
0x70000000 - 0x700fcfff com.apple.audio.units.Components 1.4.3	/System/Library/Components/CoreAudio.component/Contents/MacOS/CoreAudio
0x78048000 - 0x780d5fff com.madeup.sheepshaver ??? (2.3)	/Applications/Sheep Shaver/SheepShaver.app/Contents/MacOS/SheepShaver
0x8fe00000 - 0x8fe51fff dyld 45.3	/usr/lib/dyld
0x90000000 - 0x901bcfff libSystem.B.dylib 	/usr/lib/libSystem.B.dylib
0x90214000 - 0x90219fff libmathCommon.A.dylib 	/usr/lib/system/libmathCommon.A.dylib
0x9021b000 - 0x90268fff com.apple.CoreText 1.0.2 (???)	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreText.framework/Versions/A/CoreText
0x90293000 - 0x90344fff ATS 	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/ATS
0x90373000 - 0x9072dfff com.apple.CoreGraphics 1.258.38 (???)	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics
0x907ba000 - 0x90893fff com.apple.CoreFoundation 6.4.6 (368.27)	/System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x908dc000 - 0x908dcfff com.apple.CoreServices 10.4 (???)	/System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x908de000 - 0x909e0fff libicucore.A.dylib 	/usr/lib/libicucore.A.dylib
0x90a3a000 - 0x90abefff libobjc.A.dylib 	/usr/lib/libobjc.A.dylib
0x90ae8000 - 0x90b58fff com.apple.framework.IOKit 1.4 (???)	/System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90b6e000 - 0x90b80fff libauto.dylib 	/usr/lib/libauto.dylib
0x90b87000 - 0x90e5efff com.apple.CoreServices.CarbonCore 681.7	/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore
0x90ec4000 - 0x90f44fff com.apple.CoreServices.OSServices 4.1	/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServices.framework/Versions/A/OSServices
0x90f8e000 - 0x90fcffff com.apple.CFNetwork 4.0 (129.18)	/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwork.framework/Versions/A/CFNetwork
0x90fe4000 - 0x90ffcfff com.apple.WebServices 1.1.2 (1.1.0)	/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServicesCore.framework/Versions/A/WebServicesCore
0x9100c000 - 0x9108dfff com.apple.SearchKit 1.0.5	/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchKit.framework/Versions/A/SearchKit
0x910d3000 - 0x910fcfff com.apple.Metadata 10.4.4 (121.36)	/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadata.framework/Versions/A/Metadata
0x9110d000 - 0x9111bfff libz.1.dylib 	/usr/lib/libz.1.dylib
0x9111e000 - 0x912d9fff com.apple.security 4.5 (28992)	/System/Library/Frameworks/Security.framework/Versions/A/Security
0x913d7000 - 0x913e0fff com.apple.DiskArbitration 2.1	/System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x913e7000 - 0x9140ffff com.apple.SystemConfiguration 1.8.3	/System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfiguration
0x91422000 - 0x9142dfff libgcc_s.1.dylib 	/usr/lib/libgcc_s.1.dylib
0x91432000 - 0x9143afff libbsm.dylib 	/usr/lib/libbsm.dylib
0x9143e000 - 0x914b9fff com.apple.audio.CoreAudio 3.0.4	/System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x914f6000 - 0x914f6fff com.apple.ApplicationServices 10.4 (???)	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices
0x914f8000 - 0x91530fff com.apple.AE 1.5 (297)	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/AE.framework/Versions/A/AE
0x9154b000 - 0x91618fff com.apple.ColorSync 4.4.4	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ColorSync.framework/Versions/A/ColorSync
0x9166d000 - 0x916fefff com.apple.print.framework.PrintCore 4.6 (177.13)	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/PrintCore.framework/Versions/A/PrintCore
0x91745000 - 0x917fcfff com.apple.QD 3.10.21 (???)	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/QD.framework/Versions/A/QD
0x91839000 - 0x91897fff com.apple.HIServices 1.5.3 (???)	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/HIServices.framework/Versions/A/HIServices
0x918c6000 - 0x918e7fff com.apple.LangAnalysis 1.6.1	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LangAnalysis.framework/Versions/A/LangAnalysis
0x918fb000 - 0x91920fff com.apple.FindByContent 1.5	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/FindByContent.framework/Versions/A/FindByContent
0x91933000 - 0x91975fff com.apple.LaunchServices 181	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/LaunchServices
0x91991000 - 0x919a5fff com.apple.speech.synthesis.framework 3.3	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x919b3000 - 0x919f5fff com.apple.ImageIO.framework 1.5.0	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/ImageIO
0x91a0b000 - 0x91ad3fff libcrypto.0.9.7.dylib 	/usr/lib/libcrypto.0.9.7.dylib
0x91b21000 - 0x91b36fff libcups.2.dylib 	/usr/lib/libcups.2.dylib
0x91b3b000 - 0x91b59fff libJPEG.dylib 	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x91b5f000 - 0x91bcefff libJP2.dylib 	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJP2.dylib
0x91be5000 - 0x91be9fff libGIF.dylib 	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x91beb000 - 0x91c4afff libRaw.dylib 	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRaw.dylib
0x91c4f000 - 0x91c8cfff libTIFF.dylib 	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x91c93000 - 0x91cacfff libPng.dylib 	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libPng.dylib
0x91cb1000 - 0x91cb4fff libRadiance.dylib 	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x91cb6000 - 0x91cb6fff com.apple.Accelerate 1.2.2 (Accelerate 1.2.2)	/System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x91cb8000 - 0x91d9dfff com.apple.vImage 2.4	/System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.framework/Versions/A/vImage
0x91da5000 - 0x91dc4fff com.apple.Accelerate.vecLib 3.2.2 (vecLib 3.2.2)	/System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/vecLib
0x91e30000 - 0x91e9efff libvMisc.dylib 	/System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvMisc.dylib
0x91ea9000 - 0x91f3efff libvDSP.dylib 	/System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvDSP.dylib
0x91f58000 - 0x924e0fff libBLAS.dylib 	/System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib
0x92513000 - 0x9283efff libLAPACK.dylib 	/System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libLAPACK.dylib
0x9286e000 - 0x928f6fff com.apple.DesktopServices 1.3.4	/System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/DesktopServicesPriv
0x92937000 - 0x92b62fff com.apple.Foundation 6.4.6 (567.27)	/System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x92c80000 - 0x92d5efff libxml2.2.dylib 	/usr/lib/libxml2.2.dylib
0x92d7e000 - 0x92e6cfff libiconv.2.dylib 	/usr/lib/libiconv.2.dylib
0x92e7e000 - 0x92e9cfff libGL.dylib 	/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x92ea7000 - 0x92f01fff libGLU.dylib 	/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x92f1f000 - 0x92f1ffff com.apple.Carbon 10.4 (???)	/System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x92f21000 - 0x92f35fff com.apple.ImageCapture 3.0	/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture.framework/Versions/A/ImageCapture
0x92f4d000 - 0x92f5dfff com.apple.speech.recognition.framework 3.4	/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecognition.framework/Versions/A/SpeechRecognition
0x92f69000 - 0x92f7efff com.apple.securityhi 2.0 (203)	/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.framework/Versions/A/SecurityHI
0x92f90000 - 0x93017fff com.apple.ink.framework 101.2 (69)	/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework/Versions/A/Ink
0x9302b000 - 0x93036fff com.apple.help 1.0.3 (32)	/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framework/Versions/A/Help
0x93040000 - 0x9306dfff com.apple.openscripting 1.2.5 (???)	/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework/Versions/A/OpenScripting
0x93087000 - 0x93096fff com.apple.print.framework.Print 5.2 (192.4)	/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Print
0x930a2000 - 0x93108fff com.apple.htmlrendering 1.1.2	/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering.framework/Versions/A/HTMLRendering
0x93139000 - 0x93188fff com.apple.NavigationServices 3.4.4 (3.4.3)	/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationServices.framework/Versions/A/NavigationServices
0x931b6000 - 0x931d3fff com.apple.audio.SoundManager 3.9	/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.framework/Versions/A/CarbonSound
0x931e5000 - 0x931f2fff com.apple.CommonPanels 1.2.2 (73)	/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels.framework/Versions/A/CommonPanels
0x931fb000 - 0x93508fff com.apple.HIToolbox 1.4.8 (???)	/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox
0x93657000 - 0x93663fff com.apple.opengl 1.4.7	/System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x936fb000 - 0x9371bfff libmx.A.dylib 	/usr/lib/libmx.A.dylib
0x93721000 - 0x93721fff com.apple.Cocoa 6.4 (???)	/System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x93723000 - 0x93d56fff com.apple.AppKit 6.4.7 (824.41)	/System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x940e3000 - 0x94153fff com.apple.CoreData 80	/System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x9418c000 - 0x9424ffff com.apple.audio.toolbox.AudioToolbox 1.4.3	/System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x942a1000 - 0x942a1fff com.apple.audio.units.AudioUnit 1.4	/System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x942a3000 - 0x94476fff com.apple.QuartzCore 1.4.9	/System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x944cc000 - 0x94509fff libsqlite3.0.dylib 	/usr/lib/libsqlite3.0.dylib
0x94511000 - 0x94561fff libGLImage.dylib 	/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dylib
0x94705000 - 0x94714fff libCGATS.A.dylib 	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
0x9471c000 - 0x94729fff libCSync.A.dylib 	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x9476f000 - 0x94788fff libRIP.A.dylib 	/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x9478f000 - 0x94a5efff com.apple.QuickTime 7.1.3	/System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x94b21000 - 0x94b92fff libstdc++.6.dylib 	/usr/lib/libstdc++.6.dylib
0x97457000 - 0x97476fff com.apple.vecLib 3.2.2 (vecLib 3.2.2)	/System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x97c7c000 - 0x97c89fff com.apple.agl 2.5.6 (AGL-2.5.6)	/System/Library/Frameworks/AGL.framework/Versions/A/AGL

Model: PowerBook5,7, BootROM 4.9.1f3, 1 processors, PowerPC G4  (1.2), 1.67 GHz, 2 GB
Graphics: ATI Mobility Radeon 9700, ATY,RV360M11, AGP, 128 MB
Memory Module: SODIMM0/J20STANDARD, 1 GB, DDR SDRAM, PC2700U-25330
Memory Module: SODIMM1/J23REVERSED, 1 GB, DDR SDRAM, PC2700U-25330
AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
Modem: LastDash, UCJ, V.92, 4.0, APPLE VERSION 2.6.6
Bluetooth: Version 1.7.8f2, 2 service, 0 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
Parallel ATA Device: MATSHITADVD-R   UJ-845E, 
Parallel ATA Device: ST9100823A, 93.16 GB
USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard/Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA

Re: [B2-devel] Compilation error in Sheepshaver CVS and basilisk-devel@lists.sourceforge.net

[Gwenole B. <gb....@fr...>]

Le samedi, 7 oct 2006, =E0 03:01 Europe/Paris, Dennis Varouxis a =E9crit =
:

> I've run nm -dynamic on /usr/lib/libc.so.5 and getpagesize appears to=20=

> be in the symbol table.

So, you are not using the GNU C library? The usual C library is=20
normally under /lib{,64}/libc.so.6 on Linux systems. You might be able=20=

to execute your /usr/lib/libc.so.5 to identify it.

FYI, the reported line corresponds to an SHMLBA reference. If this=20
piece of code doesn't compile, the mostly likely cause is that your C=20
library is broken. If your system supports the X/Open System Interface=20=

for shared memory through the usual shmat() et al. functions, then=20
SHMLBA shall be defined correctly and #include <sys/shm.h> is enough in=20=

that case (i.e. no extra linker flag is needed).

Regards,
Gwenol=E9 Beauchesne.=

[B2-devel] Compilation error in Sheepshaver CVS and basilisk-devel@lists.sourceforge.net

[Dennis V. <den...@ho...>]

Hi all
running make on src/Unix:

g++ -o SheepShaver -Wl,-T,ldscripts/linux-i386.ld       obj/main.o obj/main=
_unix.o obj/prefs.o obj/prefs_items.o obj/prefs_unix.o obj/sys_unix.o obj/r=
om_patches.o obj/rsrc_patches.o obj/emul_op.o obj/name_registry.o obj/macos=
_util.o obj/timer.o obj/timer_unix.o obj/xpram.o obj/xpram_unix.o obj/adb.o=
 obj/sony.o obj/disk.o obj/cdrom.o obj/scsi.o obj/gfxaccel.o obj/video.o ob=
j/video_blit.o obj/audio.o obj/ether.o obj/thunks.o obj/serial.o obj/extfs.=
o obj/about_window_unix.o obj/user_strings.o obj/user_strings_unix.o obj/vm=
_alloc.o obj/sigsegv.o obj/rpc_unix.o obj/sshpty.o obj/strlcpy.o obj/video_=
x.o obj/extfs_unix.o obj/serial_unix.o obj/ether_unix.o obj/scsi_linux.o ob=
j/audio_oss_esd.o obj/prefs_editor_gtk.o obj/clip_unix.o obj/jit-cache.o ob=
j/basic-dyngen.o obj/ppc-dyngen.o obj/ieeefp.o obj/mathlib.o obj/ppc-cpu.o =
obj/ppc-decode.o obj/ppc-execute.o obj/ppc-translate.o obj/sheepshaver_glue=
.o obj/bootp.o obj/ip_output.o obj/tcp_input.o obj/cksum.o obj/mbuf.o obj/t=
cp_output.o obj/debug.o obj/misc.o obj/tcp_subr.o obj/if.o obj/sbuf.o obj/t=
cp_timer.o obj/ip_icmp.o obj/slirp.o obj/tftp.o obj/ip_input.o obj/socket.o=
 obj/udp.o -lrt -lpthread -lm   -lSM -lICE  -L/usr/X11R6/lib -lX11 -lXext  =
-lXxf86dga -lXxf86vm -L/usr/lib -lesd -laudiofile -lm -lgtk-x11-2.0 -lgdk-x=
11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1=
.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
obj/main_unix.o(.text+0xbe1): In function `kernel_data_init':
/home/emu/work/sheepshaver/SheepShaver-2.3/src/Unix/main_unix.cpp:1058: und=
efined reference to `__getpagesize()'
obj/main_unix.o(.text+0xcf3): In function `kernel_data_exit':
../include/cpu_emulation.h:72: undefined reference to `__getpagesize()'
collect2: ld returned 1 exit status
make: *** [SheepShaver] Error 1


I'm running this on an x86 Linux (P4), 2.6.13-gentoo-r6 and my gcc -v repor=
ts 3.3.5.
I've run nm -dynamic on /usr/lib/libc.so.5 and getpagesize appears to be in=
 the symbol table.

I'd appreciate any help

thanks

dennis

_________________________________________________________________
Be one of the first to try Windows Live Mail.
http://ideas.live.com/programpage.aspx?versionId=3D5d21c51a-b161-4314-9b0e-=
4911fb2b2e6d=

[B2-devel] Compilation error in Sheepshaver CVS and basilisk-devel@lists.sourceforge.net

[Dennis V. <den...@ho...>]

Hi all
running make on src/Unix:

g++ -o SheepShaver -Wl,-T,ldscripts/linux-i386.ld       obj/main.o obj/main=
_unix.o obj/prefs.o obj/prefs_items.o obj/prefs_unix.o obj/sys_unix.o obj/r=
om_patches.o obj/rsrc_patches.o obj/emul_op.o obj/name_registry.o obj/macos=
_util.o obj/timer.o obj/timer_unix.o obj/xpram.o obj/xpram_unix.o obj/adb.o=
 obj/sony.o obj/disk.o obj/cdrom.o obj/scsi.o obj/gfxaccel.o obj/video.o ob=
j/video_blit.o obj/audio.o obj/ether.o obj/thunks.o obj/serial.o obj/extfs.=
o obj/about_window_unix.o obj/user_strings.o obj/user_strings_unix.o obj/vm=
_alloc.o obj/sigsegv.o obj/rpc_unix.o obj/sshpty.o obj/strlcpy.o obj/video_=
x.o obj/extfs_unix.o obj/serial_unix.o obj/ether_unix.o obj/scsi_linux.o ob=
j/audio_oss_esd.o obj/prefs_editor_gtk.o obj/clip_unix.o obj/jit-cache.o ob=
j/basic-dyngen.o obj/ppc-dyngen.o obj/ieeefp.o obj/mathlib.o obj/ppc-cpu.o =
obj/ppc-decode.o obj/ppc-execute.o obj/ppc-translate.o obj/sheepshaver_glue=
.o obj/bootp.o obj/ip_output.o obj/tcp_input.o obj/cksum.o obj/mbuf.o obj/t=
cp_output.o obj/debug.o obj/misc.o obj/tcp_subr.o obj/if.o obj/sbuf.o obj/t=
cp_timer.o obj/ip_icmp.o obj/slirp.o obj/tftp.o obj/ip_input.o obj/socket.o=
 obj/udp.o -lrt -lpthread -lm   -lSM -lICE  -L/usr/X11R6/lib -lX11 -lXext  =
-lXxf86dga -lXxf86vm -L/usr/lib -lesd -laudiofile -lm -lgtk-x11-2.0 -lgdk-x=
11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1=
.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
obj/main_unix.o(.text+0xbe1): In function `kernel_data_init':
/home/emu/work/sheepshaver/SheepShaver-2.3/src/Unix/main_unix.cpp:1058: und=
efined reference to `__getpagesize()'
obj/main_unix.o(.text+0xcf3): In function `kernel_data_exit':
../include/cpu_emulation.h:72: undefined reference to `__getpagesize()'
collect2: ld returned 1 exit status
make: *** [SheepShaver] Error 1


I'm running this on an x86 Linux (P4), 2.6.13-gentoo-r6 and my gcc -v repor=
ts 3.3.5.
I've run nm -dynamic on /usr/lib/libc.so.5 and getpagesize appears to be in=
 the symbol table.

I'd appreciate any help

thanks

dennis

_________________________________________________________________
Be one of the first to try Windows Live Mail.
http://ideas.live.com/programpage.aspx?versionId=3D5d21c51a-b161-4314-9b0e-=
4911fb2b2e6d=

Re: [B2-devel] Linux + SheepShaver = extremely slow boot up...

[Jason Q. <ja...@ja...>]

Hi Natalia!

Thanks very much for your reply. So, if I switch off the JIT on Linux,
I'll get decent startup times?

I don't notice any serious performance problems under Windows.

One thing though, how much could possibly be cached? If it takes 30
seconds under Windows under VMware and the emulated machine is pretty
snappy, what exactly is being cached under Linux in order to take over
5 minutes to boot? Surely all this would do is add an initial 30
seconds or so before the boot process begins.

Cheers,
Jason.

On 8/12/06, Natalia Portillo <cl...@cl...> wrote:
> that is surely because the opcode conversion cache (If im not wrong,
> that is how SS works currently) - the JIT and so on
>
> When it is booting it is executing almost all PowerPC instructions
> (belive me, MacOS does most! xD), so they are converted, then, they
> are already cached and things works faster.
>
> I think in Windows JIT is currently broken, so there is no so cache
> in windows and that's why boots faster (but, therorically, you should
> see it is really faster in Linux).
>
> I hope it helped.
>
> El 10/08/2006, a las 18:26, Jason Quigley escribi=F3:
>
> > Hi Everybody!
> >
> > I compiled the cvs version of SS to see how it performs. Booting up
> > takes something in the order of five minutes - until it gets to the
> > "welcome to mac os" screen, then it runs quite quickly.
> >
> > Next, I tried the RPM from the wiki (using alien to make a DEB for
> > Ubuntu) and the same slow boot up occurred.
> >
> > Using the exact same disk image and ROM, I downloaded and installed
> > SS to run under Windows (via VMware) and it boots in less than 30
> > seconds.
> >
> > Is there a known problem with the Linux version? Is there any other
> > information you would like me to supply?
> >
> > Many thanks,
> > Jason.
> >
> > Ubuntu Edgy: 2.6.15-26-686
> >
> > ----------------------------------------------------------------------
> > ---
> > Using Tomcat but need to do more? Need to support web services,
> > security?
> > Get stuff done quickly with pre-integrated technology to make your
> > job easier
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> > Geronimo
> > http://sel.as-us.falkag.net/sel?
> > cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D121642_______________________=
_______
> > _________________
> > basilisk-devel mailing list
> > bas...@li...
> > https://lists.sourceforge.net/lists/listinfo/basilisk-devel
>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job ea=
sier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronim=
o
> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=
=3D121642
> _______________________________________________
> basilisk-devel mailing list
> bas...@li...
> https://lists.sourceforge.net/lists/listinfo/basilisk-devel
>

Re: [B2-devel] Linux + SheepShaver = extremely slow boot up...

[Natalia P. <cl...@cl...>]

that is surely because the opcode conversion cache (If im not wrong, =20
that is how SS works currently) - the JIT and so on

When it is booting it is executing almost all PowerPC instructions =20
(belive me, MacOS does most! xD), so they are converted, then, they =20
are already cached and things works faster.

I think in Windows JIT is currently broken, so there is no so cache =20
in windows and that's why boots faster (but, therorically, you should =20=

see it is really faster in Linux).

I hope it helped.

El 10/08/2006, a las 18:26, Jason Quigley escribi=F3:

> Hi Everybody!
>
> I compiled the cvs version of SS to see how it performs. Booting up =20=

> takes something in the order of five minutes - until it gets to the =20=

> "welcome to mac os" screen, then it runs quite quickly.
>
> Next, I tried the RPM from the wiki (using alien to make a DEB for =20
> Ubuntu) and the same slow boot up occurred.
>
> Using the exact same disk image and ROM, I downloaded and installed =20=

> SS to run under Windows (via VMware) and it boots in less than 30 =20
> seconds.
>
> Is there a known problem with the Linux version? Is there any other =20=

> information you would like me to supply?
>
> Many thanks,
> Jason.
>
> Ubuntu Edgy: 2.6.15-26-686
>
> ----------------------------------------------------------------------=20=

> ---
> Using Tomcat but need to do more? Need to support web services, =20
> security?
> Get stuff done quickly with pre-integrated technology to make your =20
> job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache =20
> Geronimo
> http://sel.as-us.falkag.net/sel?=20
> cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D121642________________________=
______=20
> _________________
> basilisk-devel mailing list
> bas...@li...
> https://lists.sourceforge.net/lists/listinfo/basilisk-devel

[B2-devel] Is the list alive?

[Jason Q. <ja...@ja...>]

ping

[B2-devel] Linux + SheepShaver = extremely slow boot up...

[Jason Q. <ja...@ja...>]

Hi Everybody!

I compiled the cvs version of SS to see how it performs. Booting up takes
something in the order of five minutes - until it gets to the "welcome to
mac os" screen, then it runs quite quickly.

Next, I tried the RPM from the wiki (using alien to make a DEB for Ubuntu)
and the same slow boot up occurred.

Using the exact same disk image and ROM, I downloaded and installed SS to
run under Windows (via VMware) and it boots in less than 30 seconds.

Is there a known problem with the Linux version? Is there any other
information you would like me to supply?

Many thanks,
Jason.

Ubuntu Edgy: 2.6.15-26-686

[B2-devel] Sound on SheepShaver compiled on OSX

[Dave G. <dav...@st...>]

Hi

SheepShaver compiles great on OSX (10.4.7) with SDL graphics and slirp
networking all working OK.  The one thing that I can=B9t get to work is sound=
.
Even though the sound control panel in MacOS 9.0.4 shows a built-in device,
there are no settings for it and no sound is heard when the alert sounds ar=
e
played.  Strangely a sound is heard when OS9 is restarted after an incorrec=
t
shut down but that=B9s the only time.  I am using a 4Mb Powermac ROM (I can=B9t
get the sound control panel to open at all with any of the New World ROM=B9s)=
.
Has anyone got any ideas what might be causing this???


Cheers

Dave

Re: [B2-devel] I can't compile sheepshaver-cvs-2006-7-19

[Gwenole B. <gb....@fr...>]

Hi,

> ./dyngen -o ppc-dyngen-ops.hpp obj/ppc-dyngen-ops.o
> dyngen: ret or jmp expected at the end of op_record_cr6_VD

Please cvs update (now works on x86-32 with gcc 4.1.2). I will fix the 
zillions other warnings tomorrow.

[B2-devel] I can't compile sheepshaver-cvs-2006-7-19

[<hy...@dr...>]

../kpx_cpu/src/cpu/ppc/ppc-dyngen-ops.cpp:35: warning: register used for two global register variables
../kpx_cpu/src/cpu/ppc/ppc-dyngen-ops.cpp:36: warning: register used for two global register variables
../kpx_cpu/src/cpu/ppc/ppc-dyngen-ops.cpp:37: warning: register used for two global register variables
./dyngen -o ppc-dyngen-ops.hpp obj/ppc-dyngen-ops.o
dyngen: ret or jmp expected at the end of op_record_cr6_VD


I compile on Linux



-------------------------------------------------
Your Life on the Net
DreamWiz Free Mail @ http://www.dreamwiz.com/

Re: [B2-devel] SheepShaver FPU emulation accuracy

[Rob S. <Ro...@xb...>]

Sorry for my late reply,

Geometry Sketchpad uses the FPU heavily when doing the more complex =
designs
in it.  Granted this is a educational title and most people don=92t have =
a
copy of it floating around but I do know it uses the fpu heavily  as it =
does
not work well at all on the 601 series ppc that less than stellar fpu
performance.  Also it at states in the requirements that an fpu must be
present. =20

-----Original Message-----
From: bas...@li...
[mailto:bas...@li...] On Behalf Of =
Gwenole
Beauchesne
Sent: Tuesday, July 04, 2006 3:29 AM
To: bas...@li...
Subject: [B2-devel] SheepShaver FPU emulation accuracy

Hi,

I have just committed code that will provide much improved FPU=20
emulation when PPC_ENABLE_FPU_EXCEPTIONS is set to 1. This is currently=20
disabled because (i) slow down factor is 3 vs. the previous code, (ii)=20
I have yet to find out a real Mac application that would benefit from=20
it. Does anyone know about one?

Testing was largely covered by VEX's jm-ppc-test slightly modified to=20
check more FPSCR flags and more values coverage. The glibc test-arith,=20
test-arithf, test-float, test-double tests also all pass. This is for=20
ppc. For x86_64, this is mostly complete provided you use gcc >=3D =
4.0.1.=20
Some errors remain with fma related instructions and a few test-double=20
tests.

Note that testing was only done with linux/ppc test programs. Again, if=20
someone knows of a real Mac application that would benefit from precise=20
exception bits, please tell.

Thanks,
Gwenol=E9.

Using Tomcat but need to do more? Need to support web services, =
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642
_______________________________________________
basilisk-devel mailing list
bas...@li...
https://lists.sourceforge.net/lists/listinfo/basilisk-devel

Re: [B2-devel] cvs make failure?

[Morgan R. <ms...@re...>]

Nigel Pearson wrote:
>> [root@morgansmachine Unix]# ./autogen.sh
>>  + Running aclocal: aclocal:configure.ac:274: warning: macro=20
>> `AM_PATH_GTK' not found in library
>> aclocal:configure.ac:280: warning: macro `AM_GNU_GETTEXT' not found in=
=20
>> library
>> done.
>=20
> 	I the same question on this list in April!
> Gwenole suggested:
>=20
> NO_CONFIGURE=3D1 ACLOCAL_FLAGS=3D"-I m4" ./autogen.sh
Thanks Nigel,

That works.

I have written out 100 times: "I must always search the archives before
posting a question" :)

Thanks Gwenole for the original answer.

Best,
Morgan.
--=20
Morgan Read
NEW ZEALAND
<mailto:mstuffATreadDOTorgDOTnz>

fedora: Freedom Forever!
http://fedoraproject.org/wiki/Overview

[B2-devel] SheepShaver FPU emulation accuracy

[Gwenole B. <gb....@fr...>]

Hi,

I have just committed code that will provide much improved FPU=20
emulation when PPC_ENABLE_FPU_EXCEPTIONS is set to 1. This is currently=20=

disabled because (i) slow down factor is 3 vs. the previous code, (ii)=20=

I have yet to find out a real Mac application that would benefit from=20
it. Does anyone know about one?

Testing was largely covered by VEX's jm-ppc-test slightly modified to=20
check more FPSCR flags and more values coverage. The glibc test-arith,=20=

test-arithf, test-float, test-double tests also all pass. This is for=20
ppc. For x86_64, this is mostly complete provided you use gcc >=3D =
4.0.1.=20
Some errors remain with fma related instructions and a few test-double=20=

tests.

Note that testing was only done with linux/ppc test programs. Again, if=20=

someone knows of a real Mac application that would benefit from precise=20=

exception bits, please tell.

Thanks,
Gwenol=E9.=

Re: [B2-devel] Subversion

[Weston Y. <wes...@gm...>]

> > What about switching to subversion?
> ...
>         Only downside is that the Mac OS IDE, Xcode,
> doesn't have a Subversion plugin that I know of.

Actually the latest versions of Xcode (2.x) support subversion
natively. (http://developer.apple.com/tools/subversionxcode.html)

Re: [B2-devel] HELLO?!?

[Nigel P. <ni...@in...>]

> HELLO?!? I need to get some assistance in completeing the "MAKE" file. 
> The
> Make command is not working. Does anyone with any knowledge actually 
> read
> this list?? Many people are having this problem... but there seems to 
> be no
> response from anyone who would be setting up this list to answer 
> QUESTIONS.

	If you give us a bit more detail about the problem
we might be able to help.


	If the error is something like:

make: *** No targets specified and no makefile found.  Stop.

then you need to run some commands to generate the makefile.
The file INSTALL in the top level of the source tree will
tell you how to get started.


	See also the archives for this mailing list.
http://sourceforge.net/mailarchive/forum.php?forum=basilisk-devel

(e.g. April has an autogen.sh problem and fix)

--
Nigel Pearson, ni...@in...|"Reality is that which,
Telstra Net. Eng., Sydney, Australia | when you stop believing
Office: 9202 3900    Fax:  9261 3912 | in it, doesn't go away."
Mobile: 0408 664435  Home: 9792 6998 | Philip K. Dick - 'Valis'

Re: [B2-devel] Subversion

[Nigel P. <ni...@in...>]

> What about switching to subversion?

	I have had good experiences using SVN for the MythTV project.
MythTV uses Subversion with the Trac issue management system,
which is a nice combination (though JIRA is still my favorite).
See http://cvs.mythtv.org/trac

	I particularly like being able to do "svn diff"
while not connected to the internet.

	Only downside is that the Mac OS IDE, Xcode,
doesn't have a Subversion plugin that I know of.

--
Nigel Pearson, ni...@in...| "Peacemaking is our profession"
Telstra Net. Eng., Sydney, Australia |Motto of Burpelson Airforce Base
Office: 9202 3900    Fax:  9261 3912 |Commanded by Gen. Jack D. Ripper
Mobile: 0408 664435  Home: 9792 6998 |        Dr Strangelove

[B2-devel] HELLO?!?

[Zelda D. <pac...@ho...>]

HELLO?!? I need to get some assistance in completeing the "MAKE" file. The 
Make command is not working. Does anyone with any knowledge actually read 
this list?? Many people are having this problem... but there seems to be no 
response from anyone who would be setting up this list to answer QUESTIONS.

_________________________________________________________________
Don't just search. Find. Check out the new MSN Search! 
http://search.msn.click-url.com/go/onm00200636ave/direct/01/

[B2-devel] Subversion

[Gwenole B. <gb....@fr...>]

Hi,

What about switching to subversion? The immediate gain I see is:
- Cheap copies, files can be moved and changelogs are kept
- ChangeSets are much more convenient to get the whole commit instead 
of looking for individual files

You can still use viewcvs for the web interface which IMHO is the best 
anyway. Too few projects use it though, I don't know why as it's much 
more convenient.

FYI, we converted (some of) our projects as follows:

* On the CVS server (or with a copy in xxx):
cvs2svn --dump-only --cvs-revnums --encoding=latin1

* On the SVN server:
svn mkdir -m "adding xxx" file:///svn/wherever/xxx
svnadmin load /svn --parent-dir /wherever/xxx < cvs2svn-dump

If you have problems with branches or tags, you may have to force them 
with --force-branch=the_branch or --force-tag=the_tag.

Note that I did not make the migration myself, I simply asked for the 
procedure to the project admin.

Bye,
Gwenole.

Re: [B2-devel] cvs make failure?

[Nigel P. <ni...@in...>]

> [root@morgansmachine Unix]# ./autogen.sh
>  + Running aclocal: aclocal:configure.ac:274: warning: macro 
> `AM_PATH_GTK' not found in library
> aclocal:configure.ac:280: warning: macro `AM_GNU_GETTEXT' not found in 
> library
> done.

	I the same question on this list in April!
Gwenole suggested:

NO_CONFIGURE=1 ACLOCAL_FLAGS="-I m4" ./autogen.sh

--
Nigel Pearson, ni...@in...|"I haven't tested it yet, but
Telstra Net. Eng., Sydney, Australia | it should be perfectly safe."
Office: 9202 3900    Fax:  9261 3912 |"Just a bit or harmless brain
Mobile: 0408 664435  Home: 9792 6998 | manipulation, that's all" - 
Wallace

[B2-devel] cvs make failure?

[Morgan R. <ms...@re...>]

Hi Folks,
Not really a devel Q, but not much happens on user:)

I've downloaded the cvs and I'm trying to make for 2.6.16-1.2133_FC5,
but I get:
[root@morgansmachine Unix]# make
make: *** No targets specified and no makefile found.  Stop.

Any ideas much appreciated (something I'm missing I suspect).  Below is
output of running autogen.sh.

Also, can "make install" be directed to install to /usr/local or /opt?
(So, I don't have to re make when I fc5->6.)

Regards,
M

[root@morgansmachine Unix]# ./autogen.sh
 + Running aclocal: aclocal:configure.ac:274: warning: macro
`AM_PATH_GTK' not f ound in library
aclocal:configure.ac:280: warning: macro `AM_GNU_GETTEXT' not found in
library
done.
 + Running autoheader: done.
 + Running autoconf: done.
 + Running 'configure ':
   ** If you wish to pass arguments to ./configure, please
   ** specify them on the command line.
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking whether gcc and cc understand -c and -o together... yes
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether make sets $(MAKE)... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for egrep... grep -E
checking for mon... no
configure: WARNING: Could not find mon, ignoring --with-mon.
checking for sem_init in -lposix4... no
checking for timer_create in -lrt... yes
checking for shm_open in -lrt... yes
checking for cos in -lm... yes
checking for X... libraries , headers
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for pthread_create in -lpthread... yes
checking for pthread_cond_init... yes
checking for pthread_cancel... yes
checking for pthread_testcancel... yes
checking for pthread_mutexattr_setprotocol... yes
checking for pthread_mutexattr_settype... yes
checking for pthread_mutexattr_setpshared... yes
checking for sem_init... yes
checking for XF86DGAQueryExtension in -lXxf86dga... yes
configure: WARNING: Cannot have both --enable-xf86-dga and
--enable-fbdev-dga, ignoring --enable-fbdev-dga.
checking for XF86VidModeQueryExtension in -lXxf86vm... yes
checking for pkg-config... /usr/bin/pkg-config
checking for GTK+ - version >=3D 1.3.15... yes (version 2.8.18)
=2E/configure: line 7064: syntax error near unexpected token `1.2.0,'
=2E/configure: line 7064: `  AM_PATH_GTK(1.2.0,'
[root@morgansmachine Unix]# make
make: *** No targets specified and no makefile found.  Stop.
[root@morgansmachine Unix]#
--=20
Morgan Read
NEW ZEALAND
<mailto:mstuffATreadDOTorgDOTnz>

fedora: Freedom Forever!
http://fedoraproject.org/wiki/Overview