Re: [Audacity-devel] Build errors @ svn 12639 - windows

[Leland <le...@au...>]

Wow, those are definitely not expected.  I just checked out a fresh copy 
and it built fine.  You might try rebuilding the entire solution or 
check out a different copy and reapply your patches to the new copy.

On 10/3/2013 2:40 AM, Lasse Steen Bohnstedt wrote:
> Uncertain whether this is to be expected because of the state of 
> affairs right now (in the midst of implementing last fixes for 2.0.5.)?
> But anyway: Read ahead if relevant, otherwise dismiss.
>
> I have cleaned the project, waited for completion, then shut down 
> visual studio.
> Then updated svn to #12639.
> Reopened visual studio, swapped configuration twice (to force-update 
> IntelliSense), waited for completion and then shut down visual studio.
> Reopened visual studio, build solution, browsed through all errors and 
> warnings.
>
> There are 4 kinds of errors.
>
>
> *============*
> *1st simple kind:*
> *============*
> *
> *
> These:
> 16>..\..\..\lib-src\libsndfile\src\ogg.c(63) : fatal error C1083: 
> Cannot open include file: 'unistd.h': No such file or directory
> 16>..\..\..\lib-src\libsndfile\src\file_io.c(41) : fatal error C1083: 
> Cannot open include file: 'unistd.h': No such file or directory
> 16>..\..\..\lib-src\libsndfile\src\audio_detect.c(26) : fatal error 
> C1083: Cannot open include file: 'unistd.h': No such file or directory
> 20>..\..\..\lib-src\libmad\decoder.c(33) : fatal error C1083: Cannot 
> open include file: 'sys/wait.h': No such file or directory
>
> And this:
> 25>..\..\..\lib-src\FileDialog\config.h(1) : fatal error C1017: 
> invalid integer constant expression
> about this portion:
>    #if
>    #define HAVE_GTK 1
>    #else
>    #undef HAVE_GTK
>    #endif
>
>
> *=================*
> *2nd more weird kind:*
> *=================*
> *
> *
> I have more than 100 build errors (and warnings) about missing *lrint* 
> and *lrintf* functions.
> The first is in lib-src\sbsms\src\utils.h line 41.
>
>
> *=============================================================*
> *3rd kind, that is probably related to a lot of warnings about 
> redefined macros:*
> *=============================================================*
> *
> *
> These errors:
> 1 x 16>..\..\..\lib-src\libsndfile\src\aiff.c(960) : error C2059: 
> syntax error : '{'
> 1 x 16>..\..\..\lib-src\libsndfile\src\aiff.c(960) : error C2146: 
> syntax error : missing ';' before identifier 'sf_min_y2'
> 4 x 16>..\..\..\lib-src\libsndfile\src\aiff.c(960) : error C2065: 
> 'sf_min_y2' : undeclared identifier
> 3 x 16>..\..\..\lib-src\libsndfile\src\aiff.c(960) : error C2065: 
> 'sf_min_x2' : undeclared identifier
> 1 x 16>..\..\..\lib-src\libsndfile\src\aiff.c(960) : error C2059: 
> syntax error : ')'
> about this line:
> comm_fmt->size = SF_MIN(sizeof (psf->u.scbuf), make_size_t 
> (comm_fmt->size)) ;
> Following this more lines go awry probably because a {} pair gets 
> choked upon.
>
> And then another macro line gone wrong:
> 1 x 16>..\..\..\lib-src\libsndfile\src\sd2.c(552) : error C2059: 
> syntax error : '{'
> 1 x 16>..\..\..\lib-src\libsndfile\src\sd2.c(552) : warning C4013: 
> 'typeof' undefined; assuming extern returning int
> 1 x 16>..\..\..\lib-src\libsndfile\src\sd2.c(552) : error C2146: 
> syntax error : missing ';' before identifier 'sf_min_y2'
> 4 x 16>..\..\..\lib-src\libsndfile\src\sd2.c(552) : error C2065: 
> 'sf_min_y2' : undeclared identifier
> 3 x 16>..\..\..\lib-src\libsndfile\src\sd2.c(552) : error C2065: 
> 'sf_min_x2' : undeclared identifier
> 2 x 16>..\..\..\lib-src\libsndfile\src\sd2.c(552) : error C2059: 
> syntax error : ')'
> it's this line:
> read_str (rsrc->rsrc_data, str_offset + 1, name, SF_MIN (SIGNED_SIZEOF 
> (name), slen + 1)) ;
> Following this many more lines fail.
>
> And another batch of errors (probably from the two macros in the line):
> 1 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2059: syntax error : '{'
> 1 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : warning 
> C4013: 'typeof' undefined; assuming extern returning int
> 1 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2146: syntax error : missing ';' before identifier 'sf_max_y1'
> 4 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2065: 'sf_max_y1' : undeclared identifier
> 3 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2065: 'sf_max_x1' : undeclared identifier
> 2 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2059: syntax error : ')'
> 1 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2059: syntax error : '{'
> 2 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2059: syntax error : ')'
> 1 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2143: syntax error : missing ')' before '->'
> 1 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2143: syntax error : missing '{' before '->'
> 1 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2059: syntax error : '->'
> 1 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2059: syntax error : ')'
> 1 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2059: syntax error : 'type'
> 1 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2143: syntax error : missing '{' before '<'
> 1 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2059: syntax error : '<'
> 1 x 16>..\..\..\lib-src\libsndfile\src\ima_oki_adpcm.c(95) : error 
> C2059: syntax error : '}'
> etc, etc....
> about this line:
> state->step_index = SF_MIN (SF_MAX (state->step_index, 0), 
> state->max_step_index) ;
> And the next line goes wrong too because of it.
>
> Another bunch of similar errors and warnings (12) probably caused by 
> macro SF_MAX in this line 358 of libsndfile\src\command.c:
> peak [0] = SF_MAX (peak [0], psf->peak_info->peaks [k].value) ;
> that causes following lines to fail too.
>
> Another bunch of similar errors and warnings (11) probably caused by 
> macro SF_MIN in this line 358 of libsndfile\src\command.c:
> size = SF_MIN (datasize, bc_min_size ((const SF_BROADCAST_INFO *) 
> psf->broadcast_16k)) ;
> that cause the following lines to fail too.
>
>
> *====================*
> *4th kind, just plain weird:*
> *====================*
>
> This:
> 16>..\..\..\lib-src\libsndfile\src\strings.c(148) : error C2065: 
> '__func__' : undeclared identifier
> about this line:
> psf_log_printf (psf, "%s : SFE_STR_BAD_TYPE\n", __func__) ;
>
> And these:
> 16>..\..\..\lib-src\libsndfile\src\common.c(1304) : error C2079: 'tv' 
> uses undefined struct 'timeval'
> 16>..\..\..\lib-src\libsndfile\src\common.c(1306) : error C2224: left 
> of '.tv_sec' must have struct/union type
> 16>..\..\..\lib-src\libsndfile\src\common.c(1306) : error C2224: left 
> of '.tv_usec' must have struct/union type
> about this portion of code:
> #if HAVE_GETTIMEOFDAY
> struct timeval tv ;
> gettimeofday (&tv, NULL) ;
> value = tv.tv_sec + tv.tv_usec ;
>
> These:
> 20>..\..\..\lib-src\libmad\layer3.c(1648) : error C2054: expected '(' 
> to follow 'inline'
> 20>..\..\..\lib-src\libmad\layer3.c(1648) : error C2057: expected 
> constant expression
> 20>..\..\..\lib-src\libmad\layer3.c(1648) : error C2466: cannot 
> allocate an array of constant size 0
> 20>..\..\..\lib-src\libmad\layer3.c(1648) : error C2057: expected 
> constant expression
> 20>..\..\..\lib-src\libmad\layer3.c(1648) : error C2466: cannot 
> allocate an array of constant size 0
> 20>..\..\..\lib-src\libmad\layer3.c(1649) : error C2085: 'sdctII' : 
> not in formal parameter list
> 20>..\..\..\lib-src\libmad\layer3.c(1649) : error C2143: syntax error 
> : missing ';' before '{'
> about this portion:
>    static inline
>    void sdctII(mad_fixed_t const x[18], mad_fixed_t X[18])
>
> And these:
> 20>..\..\..\lib-src\libmad\layer3.c(1693) : error C2054: expected '(' 
> to follow 'inline'
> 20>..\..\..\lib-src\libmad\layer3.c(1693) : error C2057: expected 
> constant expression
> 20>..\..\..\lib-src\libmad\layer3.c(1693) : error C2466: cannot 
> allocate an array of constant size 0
> 20>..\..\..\lib-src\libmad\layer3.c(1693) : error C2057: expected 
> constant expression
> 20>..\..\..\lib-src\libmad\layer3.c(1693) : error C2466: cannot 
> allocate an array of constant size 0
> 20>..\..\..\lib-src\libmad\layer3.c(1694) : error C2085: 'dctIV' : not 
> in formal parameter list
> 20>..\..\..\lib-src\libmad\layer3.c(1694) : error C2143: syntax error 
> : missing ';' before '{'
> about this portion:
>    static inline
>    void dctIV(mad_fixed_t const y[18], mad_fixed_t X[18])
>    {
>
> And these:
> 20>..\..\..\lib-src\libmad\layer3.c(1737) : error C2054: expected '(' 
> to follow 'inline'
> 20>..\..\..\lib-src\libmad\layer3.c(1737) : error C2057: expected 
> constant expression
> 20>..\..\..\lib-src\libmad\layer3.c(1737) : error C2466: cannot 
> allocate an array of constant size 0
> 20>..\..\..\lib-src\libmad\layer3.c(1737) : error C2057: expected 
> constant expression
> 20>..\..\..\lib-src\libmad\layer3.c(1737) : error C2466: cannot 
> allocate an array of constant size 0
> 20>..\..\..\lib-src\libmad\layer3.c(1738) : error C2085: 'imdct36' : 
> not in formal parameter list
> 20>..\..\..\lib-src\libmad\layer3.c(1738) : error C2143: syntax error 
> : missing ';' before '{'
> about this portion:
>    static inline
>    void imdct36(mad_fixed_t const x[18], mad_fixed_t y[36])
>    {
>
> And these:
> 20>..\..\..\lib-src\libmad\layer3.c(2276) : error C2057: expected 
> constant expression
> 20>..\..\..\lib-src\libmad\layer3.c(2276) : error C2466: cannot 
> allocate an array of constant size 0
> 20>..\..\..\lib-src\libmad\layer3.c(2277) : error C2057: expected 
> constant expression
> 20>..\..\..\lib-src\libmad\layer3.c(2277) : error C2466: cannot 
> allocate an array of constant size 0
> 20>..\..\..\lib-src\libmad\layer3.c(2277) : error C2057: expected 
> constant expression
> 20>..\..\..\lib-src\libmad\layer3.c(2277) : error C2466: cannot 
> allocate an array of constant size 0
> 20>..\..\..\lib-src\libmad\layer3.c(2277) : error C2087: 'sample' : 
> missing subscript
> 20>..\..\..\lib-src\libmad\layer3.c(2278) : error C2085: 
> 'III_overlap_z' : not in formal parameter list
> 20>..\..\..\lib-src\libmad\layer3.c(2278) : error C2143: syntax error 
> : missing ';' before '{'
> about this:
>    static inline
>    void III_overlap_z(mad_fixed_t overlap[18],
> mad_fixed_t sample[18][32], unsigned int sb)
>    {
>
>
> // Lasse
>
>
> "There is a crack in everything, that's how the light gets in." - L. Cohen
>
>
> ------------------------------------------------------------------------------
> October Webinars: Code for Performance
> Free Intel webinars can help you accelerate application performance.
> Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
> the latest Intel processors and coprocessors. See abstracts and register >
> http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk
>
>
> _______________________________________________
> audacity-devel mailing list
> aud...@li...
> https://lists.sourceforge.net/lists/listinfo/audacity-devel