Search Results for "python user interface"

...Valtr et al., Scanning Probe Microscopy controller with advanced sampling support, HardwareX, Volume 15, e00451 https://www.hardware-x.com/article/S2468-0672(23)00058-5/fulltext It is based on a low cost FPGA board Red Pitaya and additional high bit depth AD and DA converters. When put together with the AFM scanning hardware (sensor, scanner and their amplifiers) and user interface software it can serve as a standalone SPM system. Otherwise, it can serve as a sub-module for a custom built SPM system, e.g. providing the feedback loop mechanism only. Finally, it can be used as a board for developing advanced sampling techniques, which was the primary goal.

...This makes it useful for quantum optics experiments, in particular as a digital feedback controller for analog systems. Based on the open source software provided by the board manufacturer, PyRPL (Python RedPitaya Lockbox) implements many devices that are needed for optics experiments with the Red Pitaya. PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. ...

This package is designed for people who are a) interested in writing emulators or b) integrating this level of detain into their applications (e.g., a video game). The ability to do this is useful because a) it allows for tinkering far before physical implementation of the design is. In addition to a strong core, WFCPK will also include modules emulating various processors (e.g., the MOS 6502 and the Zilog Z80) as well as the Video-Audio Interface (a custom VGA-compatible display and...

Contains a framework for Coldfire MCUs like 52254. The framework supports a Command Line Interface (CLI) that may work from Serial port, USB or ENET. The framework uses Processor Expert and IDE requirement is MCU Eclipse 10.4 from Freescale. Includes the FunkOS Realtime Operating System by Funkenstein Software Consulting, available at http://funkos.sourceforge.net Mainly it is a support package for the development board Perseus, but I have ported also the RTOS to MCF52233DEMO...

The Python Hardware Processsor is a implementation of a Hardware CPU in Myhdl. The CPU can directly execute something very similar to python bytecode (but only a very restricted instruction set). The Programm code for the CPU can be written directly in python (very restricted parts of python). This code is then converted by a small python programm to this restricted python bytecode. Since the hardware description is also in python, the slightly modified bytecode an then automatically loaded...

This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating...

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device...

Devellopement d'un controlleur d'affichage (VIC) du commodore 64 embarqué dans un FPGA avec controlleur d'animation integré.

xswifs stands for: cross SoftWare Interfaces. This project provide examples (snippets) for interfacing various software tools and languages with various mechanism. It has been created to help in HW/SW co-simulation and to provide benchmarks.

This project includes a set of tools and guidelines designed for rapid production of large-scale embedded systems projects. The tools enable quick generation of reusable, reconfigurable hardware, using a user-specified hardware description language.

The ixo.de USB JTAG pod and firmware allows to access JTAG-capable chips via USB and a protocol like Altera USB-Blaster.

The foosball game is implemented in VHDL for use with the Altera DE2 FPGA board with the visual interface in a VGA monitor and input interface in a PS/2 keyboard.

Synthesia is an open hardware/software platform intended for creating standalone audio devices such as synthesizers on embedded processors.

The goal of this project is to develop an easily modifiable combination of VHDL firmware and LabView drivers for use with laboratory automation control and data acquisition using Terasic's DE2 board and the ISP1362 USB interface chip.

Plugin Eclipse/VDT supports hardware development in VHDL/Verilog, allowing to easily integrate command-line controlled tools in Eclipse. Underlying Eclipse/ExDT plugin provides integration means that may be used for other languages and applications.

m4-la is a Logic Analyzer written in VHDL for the Xilinx ML403 Development board featuring the Virtex4 FPGA. The user interface is written in C for Windows32 based platforms. Xilinx ISE and EDK tools compile the VHDL and MS Visual Studio compiles the UI.

The OS561 operating system based around FORTH/Java. The OS is to run on a VHDL chip OpenHardware design called the Minon, but could become available for other platforms. The unique point of the design is a revolutionary data compression technology.

Labcoat for SuperWikia Alpha fabrication manages new or revised fabrication processes. Its 'Cleanroom' applets allow codesmiths to access the lab environment, used to create semiconductors, substrate prototypes, chipset instruction blocks and other Labcoat projects. Our extensions in future releases will include UML support for C#/C++ conforming projects, import/export architecture schematics and refactoring sub-projects.