Search Results for "python user interface"

...This makes it useful for quantum optics experiments, in particular as a digital feedback controller for analog systems. Based on the open source software provided by the board manufacturer, PyRPL (Python RedPitaya Lockbox) implements many devices that are needed for optics experiments with the Red Pitaya. PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. ...

Contains a framework for Coldfire MCUs like 52254. The framework supports a Command Line Interface (CLI) that may work from Serial port, USB or ENET. The framework uses Processor Expert and IDE requirement is MCU Eclipse 10.4 from Freescale. Includes the FunkOS Realtime Operating System by Funkenstein Software Consulting, available at http://funkos.sourceforge.net Mainly it is a support package for the development board Perseus, but I have ported also the RTOS to MCF52233DEMO...

The Python Hardware Processsor is a implementation of a Hardware CPU in Myhdl. The CPU can directly execute something very similar to python bytecode (but only a very restricted instruction set). The Programm code for the CPU can be written directly in python (very restricted parts of python). This code is then converted by a small python programm to this restricted python bytecode. Since the hardware description is also in python, the slightly modified bytecode an then automatically loaded...

This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating...

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device...

Devellopement d'un controlleur d'affichage (VIC) du commodore 64 embarqué dans un FPGA avec controlleur d'animation integré.

xswifs stands for: cross SoftWare Interfaces. This project provide examples (snippets) for interfacing various software tools and languages with various mechanism. It has been created to help in HW/SW co-simulation and to provide benchmarks.

The ixo.de USB JTAG pod and firmware allows to access JTAG-capable chips via USB and a protocol like Altera USB-Blaster.

m4-la is a Logic Analyzer written in VHDL for the Xilinx ML403 Development board featuring the Virtex4 FPGA. The user interface is written in C for Windows32 based platforms. Xilinx ISE and EDK tools compile the VHDL and MS Visual Studio compiles the UI.

The OS561 operating system based around FORTH/Java. The OS is to run on a VHDL chip OpenHardware design called the Minon, but could become available for other platforms. The unique point of the design is a revolutionary data compression technology.

Labcoat for SuperWikia Alpha fabrication manages new or revised fabrication processes. Its 'Cleanroom' applets allow codesmiths to access the lab environment, used to create semiconductors, substrate prototypes, chipset instruction blocks and other Labcoat projects. Our extensions in future releases will include UML support for C#/C++ conforming projects, import/export architecture schematics and refactoring sub-projects.