Search Results for "spi"
Sort By:
Showing 31 open source projects for "spi"
View related business solutions-
Gemini 3 and 200+ AI Models on One PlatformBuild generative AI apps with Vertex AI. Switch between models without switching platforms.
-
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
1
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much... -
2
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
...The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. ... -
3
SWUpdate
Software Update for Embedded Systems
SWUpdate is a Linux Update agent with the goal to provide an efficient and safe way to update an embedded Linux system in the field. SWUpdate supports local and OTA updates and multiple update strategies and it is designed with security in mind. To start with SWUpdate, it is suggested you look at the documentation and build for one evaluation board (or you run SWUpdate on your host for a first overview). If you plan to update your device locally or remotely, SWUpdate is the right framework... -
4
Monsputer project
Documentation for the Z80 monsputer
The Monsputer is a Z80 computer developped with old chips (and some new) collected over the years. It has about 2M memory, clocks at 4.0MHz, has serial ports, 1 parallel port, 1 CAN bus, 2 SPI, 1 I2C, a RTC and other features. It supports interrupts mode 2 but not DMA. -
Full-stack observability with actually useful AI | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
5
uEZ
Open Source middleware platform with FreeRTOS, processor abstraction
...The .7z download is a much smaller file size. https://sourceforge.net/p/sevenzip/ uEZ v2.15.000 updates: Crossworks v5.1, IAR v9.60.3, MbedTLS/CorePKCS11 v3.6.2 with TSL 1.3, full FTP Server, FreeRTOS v11.0.1, auto-expanding heap, time.h include workaround uEZ v2.16.000 updates: Crossworks v5.3, IAR v9.70.2, emWin v6.50, MbedTLS v3.6.5, FreeRTOS v11.2.0, RTT/SystemView Multi-Core support uEZ v2.16.001 updates: Apply this patch over uEZ v2.16.000 to get new SPI flash and I2C external RTC drivers -
6
octave-raspberrypi
GNU Octave toolkit for controlling a Raspberry Pi
Basic Octave implementation of the matlab raspi extension, allowing communication to a Raspberry Pi board to control its hardware. -
7
ESP8266 Arduino Core
ESP8266 core for Arduino
...It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS servers; and it can perform OTA updates. ESP8266 Arduino core works with SD cards, servos, SPI and I2C peripherals. -
8
HelloWord-Smart Keyboard
High-end modular keyboard platform with deep customizability
...The project comprises a main keyboard PCB (STM32F103), a dynamic module (STM32F405) with additional features like an e-ink screen, OLED display and a haptic/motorized knob, a base/dock module with USB hub functionality, and other supporting PCBs. The firmware includes high-speed scanning of keystrokes, RGB lighting control via SPI/DMA, HID keyboard enumeration, multiple key-layer mapping and non-volatile configuration storage. The hardware architecture is modular: the keyboard, dynamic module, and base connect via FFC/contacts so you can swap out the dynamic side module or bottom. The documentation includes 3D models for casing, firmware binaries, and tools for customization. -
9
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here.... -
Fully Managed MySQL, PostgreSQL, and SQL ServerCloud SQL handles your database ops end to end, so you can focus on your app.
-
10
FabGL
ESP32 Display Controller (VGA, PAL/NTSC Color Composite, SSD1306, ST77
FabGL is mainly a Graphics Library for ESP32. It implements several display drivers (VGA output, PAL/NTSC Color Composite, I2C and SPI displays). FabGL can also get input from a PS/2 Keyboard and a Mouse. FabGL implements also: an Audio Engine (DAC and Sigma-Delta), a Graphical User Interface (GUI), a Game Engine and an ANSI/VT Terminal. VGA output requires an external digital-to-analog converter (DAC): it can be done by three 270 Ohm resistors to have 8 colors, or by 6 resistors to have 64 colors. ... -
11
pi-gpio
A dynamic C library to control Raspberry Pi GPIO channels
A dynamic C library to control Raspberry Pi GPIO channels Supports all production models / all SOC This library has code to:- Read Raspberry Pi Information Perform basic GPIO functions • Set gpio as input or output • Read/Write gpio • Set pullup/down of gpio • Read the current gpio mode • Read gpio pull/up down (Pi4/BCM2711 only) Software PWM on all pins Hardware PWM support Read/Set PAD drive, hysteresis & slew settings I²C SPI -
12
raspberry-gpio-python
A Python module to control the GPIO on a Raspberry Pi
...If you are after true real-time performance and predictability, buy yourself an Arduino! (see http://www.arduino.cc ) Note that the current release does not support SPI, I2C, 1-wire or serial functionality on the RPi yet. This is planned for the near future - watch this space! -
13
Alios Things
AliOS Things latest version
AliOS Things was released at the 2017 Hangzhou Yunqi Conference. It is a highly scalable IoT operating system under the AliOS family for IoT. It was announced as open-source on GitHub on October 20, 2017. The latest version is AliOS Things 3.3. AliOS Things supports multiple CPU architectures, including ARM, C-Sky, MIPS, RISCV, etc. AliOS Things adapts layered architecture and component architecture. Alibaba's value-added and commonly used IoT components, including LinkSDK, OTA (safety... -
14
rims-arduino-library
Recirculation infusion mash system library for Arduino
This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is... -
15
stm32f7nucleo-eastrising-7inch-lcd-spi
STM32 Nucleo STM32F746ZG interface to East Rising 7 inch LCD Panel
An STM32 Nucleo-144 development board with Arduino Uno Rev3 connectivity is interfaced via an EastRising Technology Co Ltd Shield PCB to the East Rising 800x480 pixel 7 inch LCD panel with resistive touch screen. A set of functions has been developed to drive the panel via SPI, which uses the RAiO Technology Inc RA8875 TFT-LCD controller IC. Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. The STM library is used along with FreeRTOS. Please see: LcdTest_ReadMe.pdf or LcdTest_ReadMe.odt. The project is simply a personal record of what has been done, and will not be developed further. -
16
EtherCard
EtherCard is an IPv4 driver for the ENC28J60 chip
...Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. An interrupt pin is not required. Any Arduino IDE >= 1.0.0 should be fine. EtherCard is available for installation in the Arduino Library Manager. Alternatively, it can be downloaded directly from GitHub. -
17
openMAS
Opensource hardware platform for Arduino and Raspberry Pi
openMAS is an open source hardware platform based on DIN41612. Different boards can be used as controllers (Arduino, RaspberryPi, Nucleo, NI-Hardware). The modular construction converts your µ-controller board into an extensible measurement and automation system. For more information: openmas.de The english page is not ready, please use the german version. Have a lot of fun, openMAS-Team -
18
Arduino Si4735 radio library
Arduino and Silicon Laboratories Si4735 radio library
This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features. -
19
Asphyre
Asphyre is a cross-platform framework for Delphi and FreePascal.
...The framework provides facilities for real-time rendering of graphics (using DirectX, OpenGL or Software Renderer), text output, mathematics (including vectors and matrices) and networking communication, among other features. It also supports singleboard devices such as Raspberry PI, Intel Galileo, BeagleBone Black and others with features like GPIO, SPI, I2C and so on, along with external displays, sensors and other peripheral devices. -
20
Heads
A minimal Linux that runs as a coreboot or LinuxBoot ROM payload
...Heads is not just another Linux distribution – it combines the physical hardening of specific hardware platforms and flash security features with custom coreboot firmware and a Linux boot loader in ROM. This moves the root of trust into the write-protected region of the SPI flash and prevents further software modifications to the bootup code (and on platforms that support it, Bootguard can protect against many hardware attacks as well). -
21
AVR32 Ecos
Ecos for AVR32 targets
...Ecos-3.0 – ecos + AVR32UC3C port source files. Hellow_Examples – example project in Atmel studio 6.2 with, ADC test, LED and push buttons test, internal FLASH test, external SPI Atmel Data FLASH test, AST wallclock test and USB tests for AT32UC3C-EK board. This project contains all necessary ecos headers and library to be compiled and linked in Atmel studio. -
22
FlashProg
Simple USB flash memory programmer.
FlashProg is USB base flash memory programmer which is specifically design to read and program 3.3V SPI flash memory devices. -
23
BlackLib
Beaglebone Black C++ Library
BlackLib library is wrote for controlling Beaglebone Black's feature. It takes power from C++ language. It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library. -
24
Tutorial de como utilizar SDCC con el PIC18F4550. Incluir ejemplos de funciones particulares: adc, spi, i2c, usart, usb, atención a interrupciones etc.
-
25
Fat32lib
Portable FAT File System Stack for Embedded Devices
A portable FAT file system stack for embedded devices.
